Template: Service00

From Waveshare Wiki
Revision as of 09:25, 12 July 2022 by Eng52 (talk | contribs) (→‎FAQ)
Jump to: navigation, search


FAQ


 Answer:
  • Pin 1 on the PCB is marked with a white round silk screen or square solder joint, as shown in the figure:
    Atmel-ICE-10PIN.jpg


 Answer:
  • There is no Chinese version of the tutorial. There is an English version, you can directly click the Help link in the software interface. In addition, the operation of AVR Studio 6 and 7 is similar to that of 5. For details of 5, please refer to Chinese version simple operation tutorial



 Answer:
  • The corresponding relationship between JTAG and ISP serial numbers of the scattered head is as shown in the figure below, the label 0 on the scattered head corresponds to the serial number 1 on the table
    Atmel-ICE-Pins-number.jpg
*ISP 6PIN The interface serial number corresponds to
Atmel-ICE-ISP-interface.jpg
*ISP 6PIN to ISP 10PIN sending and receiving
Atmel-ICE-ISP6-to- ISP10.jpg

Note: The red line is VCC



Support

If you require technical support, please go to the Support page and open a ticket.