Difference between revisions of "Template:Service00"

From Waveshare Wiki
Jump to: navigation, search
Line 23: Line 23:
 
}}
 
}}
 
-->
 
-->
 
=FAQ=
 
{{FAQ|1. What is the detailed device support list of Atmel-ICE? |
 
*Click to view detailed device support list: [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html UC3], [http://www.atmel.com/webdoc/atmelstudio /supported.devices.AVR.Mega.html Mega], [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html SAM], [http://www.atmel.com /webdoc/atmelstudio/supported.devices.AVR.UC3.html Tiny], [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html Xmega]|||}}
 
{{FAQ|2. How to read pin 1 on the adapter board? |
 
*Pin 1 on the PCB is marked with a white round silk screen or square solder joint, as shown in the figure: <br />[[File:Atmel-ICE-10PIN.jpg|400px]]|||}}
 
{{FAQ|3. Does Atmel-ICE have any related tutorials under ICC8AVR? |
 
*For related instructions, please refer to: [https://{{SERVERNAME}}/w/upload/7/7d/ICCAVR8_Debug_%28JTAG_ICE_mkII_Atmel-ICE%29.pdf ICC8AVR Manual], [https://{{SERVERNAME}}/ forum/thread-210-1-1.html ICC8AVR simulation tutorial]|||}}
 
{{FAQ|4. Common interface connection diagram of Atmel-ICE|
 
*The corresponding relationship between JTAG and ISP serial numbers of the scattered head is as shown in the figure below, the label 0 on the scattered head corresponds to the serial number 1 on the table<br />[[File:Atmel-ICE-Pins-number.jpg|200px]]|*ISP 6PIN The interface serial number corresponds to<br />[[File:Atmel-ICE-ISP-interface.jpg|400px]]|*ISP 6PIN to ISP 10PIN sending and receiving<br />[[File:Atmel-ICE-ISP6-to- ISP10.jpg|200px]]<br />|Note: The red line is VCC}}
 
 
<!--
 
{{FAQ|What kind of battery does the Alphabot series smart cars match?
 
|Equipped with 18650 type battery, that is directly 18mm, the length is 65mm. The standard voltage of a single cell is generally 3.7V, the fully charged voltage is generally 4.2V, and the minimum voltage cannot be lower than 3V or 2.75V, otherwise the battery will be permanently damaged.
 
}}
 
{{FAQ|Running the program, the trolley motor does not move?
 
|Need more user manual to change the position of jumper cap.
 
}}
 
{{FAQ|The infrared obstacle avoidance program is abnormal?
 
|First check whether the infrared obstacle avoidance module is normal. Under normal circumstances, the green LED light is off, and the LED light is on when there are obstacles. If the green LED light is always on or off, you can adjust the potentiometer on the module so that the green LED light just goes out. Also check that the jumper is correct.
 
}}
 
{{FAQ|Can the car follow a T-junction or intersection?
 
|If it cannot be recognized, the car can only track along the line. To recognize the T-word or cross, it is best to use the camera to track.
 
}}
 
-->
 
 
 
= Support =
 
= Support =
 
<font style="color:green; weight:bold;"><big>'''If you require technical support, please go to the {{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=[https://support.waveshare.com/hc/en-us/requests/new Support]}} page and open a ticket.'''</big></font>
 
<font style="color:green; weight:bold;"><big>'''If you require technical support, please go to the {{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=[https://support.waveshare.com/hc/en-us/requests/new Support]}} page and open a ticket.'''</big></font>

Revision as of 10:30, 12 July 2022

Support

If you require technical support, please go to the Support page and open a ticket.