Template: Service00

From Waveshare Wiki
Revision as of 09:30, 12 July 2022 by Eng52 (talk | contribs) (→‎FAQ)
Jump to: navigation, search


  • Pin 1 on the PCB is marked with a white round silk screen or square solder joint, as shown in the figure:

  • The corresponding relationship between JTAG and ISP serial numbers of the scattered head is as shown in the figure below, the label 0 on the scattered head corresponds to the serial number 1 on the table
*ISP 6PIN The interface serial number corresponds to
*ISP 6PIN to ISP 10PIN sending and receiving
Atmel-ICE-ISP6-to- ISP10.jpg

Note: The red line is VCC


If you require technical support, please go to the Support page and open a ticket.