Difference between revisions of "Template:Service00"

From Waveshare Wiki
Jump to: navigation, search
Line 25: Line 25:
  
 
=FAQ=
 
=FAQ=
 +
{{FAQ|1. What is the detailed device support list of Atmel-ICE? |
 +
*Click to view detailed device support list: [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html UC3], [http://www.atmel.com/webdoc/atmelstudio /supported.devices.AVR.Mega.html Mega], [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html SAM], [http://www.atmel.com /webdoc/atmelstudio/supported.devices.AVR.UC3.html Tiny], [http://www.atmel.com/webdoc/atmelstudio/supported.devices.AVR.UC3.html Xmega]|||}}
 +
{{FAQ|2. How to read pin 1 on the adapter board? |
 +
*Pin 1 on the PCB is marked with a white round silk screen or square solder joint, as shown in the figure: <br />[[File:Atmel-ICE-10PIN.jpg|400px]]|||}}
 +
{{FAQ|3, Is there a Chinese version of the tutorial for AVR Studio 6 or 7?|
 +
*There is no Chinese version of the tutorial. There is an English version, you can directly click the Help link in the software interface. In addition, the operation of AVR Studio 6 and 7 is similar to that of 5. For details of 5, please refer to [https://{{SERVERNAME}}/w/upload/DVD_AVR8_CN/data/product/USB_AVR_JTAG_ICE_XPII_PG-6-2.htm Chinese version simple operation tutorial]| ||}}
 +
{{FAQ|4. Does Atmel-ICE have any related tutorials under ICC8AVR? |
 +
*For related instructions, please refer to: [https://{{SERVERNAME}}/w/upload/7/7d/ICCAVR8_Debug_%28JTAG_ICE_mkII_Atmel-ICE%29.pdf ICC8AVR Manual], [https://{{SERVERNAME}}/ forum/thread-210-1-1.html ICC8AVR simulation tutorial]|||}}
 +
{{FAQ|5. Common interface connection diagram of Atmel-ICE|
 +
*The corresponding relationship between JTAG and ISP serial numbers of the scattered head is as shown in the figure below, the label 0 on the scattered head corresponds to the serial number 1 on the table<br />[[File:Atmel-ICE-Pins-number.jpg|200px]]|*ISP 6PIN The interface serial number corresponds to<br />[[File:Atmel-ICE-ISP-interface.jpg|400px]]|*ISP 6PIN to ISP 10PIN sending and receiving<br />[[File:Atmel-ICE-ISP6-to- ISP10.jpg|200px]]<br />|Note: The red line is VCC}}
 +
 +
<!--
 
{{FAQ|What kind of battery does the Alphabot series smart cars match?
 
{{FAQ|What kind of battery does the Alphabot series smart cars match?
 
|Equipped with 18650 type battery, that is directly 18mm, the length is 65mm. The standard voltage of a single cell is generally 3.7V, the fully charged voltage is generally 4.2V, and the minimum voltage cannot be lower than 3V or 2.75V, otherwise the battery will be permanently damaged.
 
|Equipped with 18650 type battery, that is directly 18mm, the length is 65mm. The standard voltage of a single cell is generally 3.7V, the fully charged voltage is generally 4.2V, and the minimum voltage cannot be lower than 3V or 2.75V, otherwise the battery will be permanently damaged.
Line 37: Line 49:
 
|If it cannot be recognized, the car can only track along the line. To recognize the T-word or cross, it is best to use the camera to track.
 
|If it cannot be recognized, the car can only track along the line. To recognize the T-word or cross, it is best to use the camera to track.
 
}}
 
}}
 +
-->
 +
 
= Support =
 
= Support =
 
<font style="color:green; weight:bold;"><big>'''If you require technical support, please go to the {{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=[https://support.waveshare.com/hc/en-us/requests/new Support]}} page and open a ticket.'''</big></font>
 
<font style="color:green; weight:bold;"><big>'''If you require technical support, please go to the {{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=[https://support.waveshare.com/hc/en-us/requests/new Support]}} page and open a ticket.'''</big></font>

Revision as of 09:25, 12 July 2022


FAQ


 Answer:
  • Pin 1 on the PCB is marked with a white round silk screen or square solder joint, as shown in the figure:
    Atmel-ICE-10PIN.jpg


 Answer:
  • There is no Chinese version of the tutorial. There is an English version, you can directly click the Help link in the software interface. In addition, the operation of AVR Studio 6 and 7 is similar to that of 5. For details of 5, please refer to Chinese version simple operation tutorial



 Answer:
  • The corresponding relationship between JTAG and ISP serial numbers of the scattered head is as shown in the figure below, the label 0 on the scattered head corresponds to the serial number 1 on the table
    Atmel-ICE-Pins-number.jpg
*ISP 6PIN The interface serial number corresponds to
Atmel-ICE-ISP-interface.jpg
*ISP 6PIN to ISP 10PIN sending and receiving
Atmel-ICE-ISP6-to- ISP10.jpg

Note: The red line is VCC



Support

If you require technical support, please go to the Support page and open a ticket.