Template: SIM8200X 5G Router User Manual
From Waveshare Wiki
Revision as of 04:04, 17 June 2021 by Waveshare-eng11 (talk | contribs) (Created page with " ==Login the router== *Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin). ...")
Login the router
- Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin).
Connect to 5G
- Login the router->Network -> 4G/5G network. If you connect the 5G successfully, the status will change and the network type should be NR5G;
Enable the Hotspot
- Hotspot->SSID-> open 2.4G hotspot->apply
AT command debugging
- Debug->CMD->4G/5G module terminal->Send AT command and the network of the router is disconnected.
Note that you should disable the debug function after finishing the debugging. 800px