Difference between revisions of "Template:SIM8200X 5G Router User Manual"
From Waveshare Wiki
(Created page with " ==Login the router== *Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin). ...") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 2: | Line 2: | ||
==Login the router== | ==Login the router== | ||
*Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin). | *Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin). | ||
| − | [[File: | + | [[File:SIM8200 5G route(1).png|800px]] |
==Connect to 5G== | ==Connect to 5G== | ||
*Login the router->Network -> 4G/5G network. If you connect the 5G successfully, the status will change and the network type should be NR5G; | *Login the router->Network -> 4G/5G network. If you connect the 5G successfully, the status will change and the network type should be NR5G; | ||
| − | [[File: | + | [[File:SIM8200 5G route(2).png|800px]] |
==Enable the Hotspot == | ==Enable the Hotspot == | ||
*Hotspot->SSID-> open 2.4G hotspot->apply | *Hotspot->SSID-> open 2.4G hotspot->apply | ||
| − | [[File: | + | [[File:SIM8200 5G route(3).png|800px]] |
| + | |||
==AT command debugging== | ==AT command debugging== | ||
| − | *Debug->CMD-> | + | *Debug->CMD->terminal->Send AT command and the network of the router is disconnected. |
| − | Note that you should disable the debug function after finishing the debugging. | + | Note that you should disable the debug function after finishing the debugging.<br /> |
| − | [[File: | + | [[File:SIM8200 5G route(4).png|800px]] |
Latest revision as of 08:32, 29 November 2021
Login the router
- Connect the router to your PC by network cable, open a browser in PC and navigate to 192.168.8.1. login with the default user/password (admin/admin).
.png)
Connect to 5G
- Login the router->Network -> 4G/5G network. If you connect the 5G successfully, the status will change and the network type should be NR5G;
.png)
Enable the Hotspot
- Hotspot->SSID-> open 2.4G hotspot->apply
.png)
AT command debugging
- Debug->CMD->terminal->Send AT command and the network of the router is disconnected.
Note that you should disable the debug function after finishing the debugging.
.png)