Difference between revisions of "Template:RPi LCD FAQ"

From Waveshare Wiki
Jump to: navigation, search
Line 4: Line 4:
 
|3.5inch RPi LCD (A)
 
|3.5inch RPi LCD (A)
 
|3.2inch RPi LCD (B) =
 
|3.2inch RPi LCD (B) =
{{FAQ|How to apply the RPi LCD in a custom Raspbian system mirror image?
+
{{FAQ|How to apply the RPi LCD in a custom Raspbian system image?
 
|
 
|
 
Configure your Pi:
 
Configure your Pi:

Revision as of 02:14, 3 May 2016


 Answer:
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
Make sure the hardware connection is correct and connects fine.

Make sure the image in TF card is burnt correctly.

The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image were burnt incorrectly OR the TF card were in bad contact.
{{{3}}}
{{{4}}}

{{{5}}}


 Answer:
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the USB port of PC might not have enough power to support the Pi and LCD.
{{{3}}}
{{{4}}}

{{{5}}}