Template: Pico RGB LED Spec
From Waveshare Wiki
Revision as of 07:52, 17 August 2021 by Waveshare-eng11 (talk | contribs) (Created page with "==Overview== The Pico-RGB-LED is an LED matrix module designed for Raspberry Pi Pico, which has 160 (16×10) RGB full-color external-controlled constant current integrated LED...")
Overview
The Pico-RGB-LED is an LED matrix module designed for Raspberry Pi Pico, which has 160 (16×10) RGB full-color external-controlled constant current integrated LEDs, with embedded quality controller IC and LED chip. It is small in size, uses very few peripheral components, and presents a clean-looking front panel. Controlled by a Raspberry Pi Pico, this LED panel is programable for a high-level, colorful matrix display.
Feature
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- 160 RGB LEDs arranged in 16×10 grid, multiple IO selection
- Right-angled 2.54mm pitch male pin header on the bottom, for easy extension
- 0807 colorful LEDs, integrating quality single wire cascading constant current driver IC and quality RGB LED chip, aka external-controlled constant *current integrated LEDs
- Embedded controller IC, with features like high reliability, high anti-interference performance, high constant current accuracy, and low power consumption
- Integrated quality LED chip, with high consistent brightness and pure white light effect, lower light degradation
Specifications
- Operating voltage: 5V
- Communication: Single wire return to zero code
- Color depth: 24-bit (each 8-bit of RGB)
- Data rate: 800Kbps
- Brightness: adjustable 256 level
- Pixels: 16 x 10 pixels
- Dimensions: 54.00 x 26.00mm
Pinout
Dimension
