Difference between revisions of "Template:Pico-SIM7080G-Cat-M-NB-IoT Use"
(Created page with "==Introductions== ===Features At A Glance=== The Pico-SIM7080G-Cat-M/NB-IoT is an NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication)...") |
(No difference)
|
Revision as of 03:50, 11 June 2021
Introductions
Features At A Glance
The Pico-SIM7080G-Cat-M/NB-IoT is an NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency band, can be controlled via serial AT commands, and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- UART communication, serial AT commands control
- Communication protocol support: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT...
- GNSS positioning support: GPS, GLONASS, BeiDou, and Galileo
- Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharging it in turn
- 2x LED indicators, for monitoring the module operating status
- Onboard Nano SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
- Comes with development resources and manual (MicroPython examples)
Specifications
Product |
SIM7080G |
SIM7020C / SIM7020E |
---|---|---|
FREQUENCY BAND | ||
NB-IoT |
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/ |
SIM7020C: |
Cat-M |
B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/ |
不支持 |
GNSS |
GPS, GLONASS, BeiDou, Galileo |
- |
Applicable region |
global applicable |
SIM7020C:中国 |
DATA RATE | ||
NB-IoT(Kbps) |
136(DL)/150(UL) |
26.15(DL)/62.5(UL) |
Cat-M(Kbps) |
589(DL)/1119(UL) |
- |
OTHERS | ||
Communication protocol |
TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT 等 | |
Power supply |
External Li-po battery OR Raspberry Pi Pico USB port | |
Battery interface |
3.7V ~ 4.2V | |
Logic level |
3.3V | |
Module standalone current |
Idle mode:10mA |
Idle mode:5.6mA |
Sleep mode:1.2mA |
Sleep mode:0.4mA | |
PSM mode:3.2uA |
PSM mode:3.4uA | |
Indicator |
NET:NET: network indicator | |
Switch |
Li-po battery power supply switch | |
SIM card |
NB-IoT / Cat-M card (1.8V ONLY) |
NB card (1.8V / 3V) |
Antenna connector |
LTE、GNSS |
LTE |
Dimensions |
73.5 × 24.00mm |