Template: OAK-D Quick Start
From Waveshare Wiki
Revision as of 08:09, 15 March 2022 by Waveshare-eng11 (talk | contribs)
Hardware Connection
OAK-D
- Connect the power adapter to the power interface of the OAK-D
- Connect the USB port of OAK-D to Host PC by the Type-C cable
OAK-D-PoE
- To use the OAK-D-PoE, you will need a PoE switch or Injector to power the PoE device. After powering the device, LED should start blinking
- Connect your computer to the same LAN as the PoE device
OAK-D-Lite
- Connect the USB port of OAK-D to host PC with a Type-C cable
Software setup
Please refer to the guides according to your Host PC.