Template: MQ-7 Gas Sensor Spec
From Waveshare Wiki
Overview
The gas sensing material used in the MQ-7 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When carbon monoxide gas exists in the environment where the sensor is located, the conductivity of the sensor increases with the increase of carbon monoxide gas concentration in the air.
Features
- Sensitive for carbon monoxide
- Output voltage boosts along with the concentration of the measured gases increases
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
Specification
- Power: 2.5V ~ 5.0V
- Dimension: 40.0mm * 21.0mm
- Mounting holes size: 2.0mm
Pinouts
PIN | Description |
DOUT | Digital data output |
AOUT | Analog data output |
GND | Ground |
VCC | Power input (2.5V ~ 5.0V) |