Difference between revisions of "Template:MQ-7 Gas Sensor Spec"

From Waveshare Wiki
Jump to: navigation, search
(Created page with "==Features== *Sensitive for carbon monoxide *Output voltage boosts along with the concentration of the measured gases increases *Fast response and recovery *Adjustable sensiti...")
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 +
=Overview=
 +
The gas sensing material used in the MQ-7 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When carbon monoxide gas exists in the environment where the sensor is located, the conductivity of the sensor increases with the increase of carbon monoxide gas concentration in the air.
 
==Features==
 
==Features==
 
*Sensitive for carbon monoxide
 
*Sensitive for carbon monoxide
Line 5: Line 7:
 
*Adjustable sensitivity
 
*Adjustable sensitivity
 
*Signal output indicator
 
*Signal output indicator
 +
 
==Specification==
 
==Specification==
 
*Power: 2.5V ~ 5.0V
 
*Power: 2.5V ~ 5.0V
Line 10: Line 13:
 
*Mounting holes size: 2.0mm
 
*Mounting holes size: 2.0mm
 
==Pinouts==
 
==Pinouts==
{|class="list"
+
{|class="wikitable"
 
|-style="font-weight:bold;"
 
|-style="font-weight:bold;"
 
|PIN||Description
 
|PIN||Description

Revision as of 02:17, 19 July 2022

Overview

The gas sensing material used in the MQ-7 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When carbon monoxide gas exists in the environment where the sensor is located, the conductivity of the sensor increases with the increase of carbon monoxide gas concentration in the air.

Features

  • Sensitive for carbon monoxide
  • Output voltage boosts along with the concentration of the measured gases increases
  • Fast response and recovery
  • Adjustable sensitivity
  • Signal output indicator

Specification

  • Power: 2.5V ~ 5.0V
  • Dimension: 40.0mm * 21.0mm
  • Mounting holes size: 2.0mm

Pinouts

PIN Description
DOUT Digital data output
AOUT Analog data output
GND Ground
VCC Power input (2.5V ~ 5.0V)