Template: L76K GPS Module Working with Windows
From Waveshare Wiki
Working in Windows
- Connect the GPS antenna, connect the USB to the UART module (sold separately), and then connect to the computer. as the picture shows. After connecting, the power indicator light (PWR) is always on.
Note: The red cable is not VCC, and the black cable is not GND.
Module | USB To UART |
---|---|
VCC | 5V/3.3V |
GND | GND |
RX | TXD |
TX | RXD |
PPS | N/A |
- Open the computer serial port debugging assistant, set the corresponding serial port number (com5 here), baud rate 9600, 8 data bits, 1 stop bit, no parity bit, and no flow control.
The serial port assistant can be downloaded File:Sscom.7z.