Difference between revisions of "Template:L76K GPS Module Working with Windows"

From Waveshare Wiki
Jump to: navigation, search
(Created page with "=Working in Windows= *Connect the GPS antenna, connect the USB to the UART module (sold separately), and then connect to the computer. as the picture shows. After connecting,...")
 
Line 19: Line 19:
 
*Open the computer serial port debugging assistant, set the corresponding serial port number (com5 here), baud rate 9600, 8 data bits, 1 stop bit, no parity bit, and no flow control.
 
*Open the computer serial port debugging assistant, set the corresponding serial port number (com5 here), baud rate 9600, 8 data bits, 1 stop bit, no parity bit, and no flow control.
 
The serial port assistant can be downloaded [[File:Sscom.7z |here]].<br/>
 
The serial port assistant can be downloaded [[File:Sscom.7z |here]].<br/>
[[File:L76K GPS Module win.png]]<br/>
+
[[File:L76K GPS Module win02.png]]<br/>

Revision as of 09:03, 2 December 2022

Working in Windows

  • Connect the GPS antenna, connect the USB to the UART module (sold separately), and then connect to the computer. as the picture shows. After connecting, the power indicator light (PWR) is always on.

L76K GPS Module win.png
Note: The red cable is not VCC, and the black cable is not GND.

Module USB To UART
VCC 5V/3.3V
GND GND
RX TXD
TX RXD
PPS N/A
  • Open the computer serial port debugging assistant, set the corresponding serial port number (com5 here), baud rate 9600, 8 data bits, 1 stop bit, no parity bit, and no flow control.

The serial port assistant can be downloaded File:Sscom.7z.
L76K GPS Module win02.png