Template: IMX219-Jetson-Camera-User-Guides
From Waveshare Wiki
Revision as of 06:15, 20 January 2021 by Waveshare-eng11 (talk | contribs)
Test with Jetson Nano
Hardware connection
- Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
- Connect an HDMI LCD to Jetson Nano
Software setting
- Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
- Test camera with command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
- Test dual-camera
- IF you want to test dual cameras with B01 Developer Kit.You can just add sensor-id=x to the pipeline. x can be 0 or 1.
#test video0 DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc sensor-id=0 ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e #test video1 DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc sensor-id=1 ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
- If you find that the image captured is reddish. You can try to download .isp file and installed:
wget https://www.waveshare.com/w/upload/e/eb/Camera_overrides.tar.gz tar zxvf Camera_overrides.tar.gz sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/ sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp
Test with Compute Module
The IMX219 series can be used with Compute Module series of Raspberry Pi with carriers. And the usage are same as other Raspberry Pi cameras
Becuase of the encropytoin, the IMX219 series cameras cannot be used with Raspberry Pi board like the Raspberry Pi 4B, please note it.
- Connect the camera to Compute Module Carrier board (like Compute Module 4 PoE Board), please take care of the direction.
- Open a terminal and configure the camera
sudo raspi-config
- Select Interfacing Options -> Camera -> Yes
- Reboot
- Test the camera with command:
sudo raspistill -t 0
- For more information about commands for camera, please refer to this guides:
Selection Guide
Product | Pixels | Sensor | Dual Len | Infrared | Angle of View (Diagonal)(degree) | Afterture (F) | Focal Length (MM) | PCBA | Suit for |
---|---|---|---|---|---|---|---|---|---|
RPi Camera | 8 Mega | IMX219 | × | × | 62.2 | 2.0 | 3.04 | √ | Raspberry Pi, Jetson Nano |
RPi NoIR Camera V2 | √ | 62.2 | 2.0 | 3.04 | √ | Raspberry Pi, Jetson Nano | |||
IMX219-77 Camera | × | 77 | 2.0 | 2.96 | √ | Jetson Nano, CM3/3+ | |||
IMX219-77IR | √ | 77 | 2.0 | 2.96 | √ | Jetson Nano, CM3/3+ | |||
IMX219-120 Camera | × | 120 | 2.2 | 1.88 | √ | Jetson Nano, CM3/3+ | |||
IMX219-160 Camera | × | 160 | 2.35 | 3.15 | √ | Jetson Nano, CM3/3+ | |||
IMX219-160IR Camera | √ | 160 | 2.35 | 3.15 | √ | Jetson Nano, CM3/3+ | |||
IMX219-160 IR-CUT Camera | √ | 160 | 2.7 | 3.62 | √ | Jetson Nano, CM3/3+ | |||
IMX219-170 Camera | × | 170 | 2.0 | 0.87 | √ | Jetson Nano, CM3/3+ | |||
IMX219-200 Camera | × | 200 | 2.0 | 3.15 | √ | Jetson Nano, CM3/3+ | |||
IMX219-D160 | × | 160 | 2.35 | 3.15 | × | Raspberry Pi, Jetson Nano | |||
IMX219-83 Stereo Camera | √ | × | 83 | NA | 2.6 | √ | Jetson Nano, CM3/3+ |