Template:Hardware/Software setting for SPI e-paper

We provide examples for four popular platforms: Arduino UNO, Jetson Nano， Raspberry Pi, and STM32. You can refer to the corresponding part according to the platform you use(This is a common template will be used by all types of the e-Paper, please refer to the corresponding type you have)

Arduino

Hardware connection

The demo codes provided are tested on Arduino UNO. If you want to use another Arduino board, you may need to change the connection and port the codes by yourself.
The RAM of Arduino UNO is too small to realize drawing function of e-Paper. In this case, for most of the e-Paper, we only make the image display function and save the image to flash.
We recommend you to use [E-Paper Shield] if you use Arduino UNO. The seven-color e-Paper is not compatible with the e-Paper shield, please note it.

Connect to Arduino Pins

e-Paper	Arduino UNO	Mega2560
Vcc	5V	5V
GND	GND	GND
DIN	D11	D51
CLK	D13	D52
CS	D10	D10
DC	D9	D9
RST	D8	D8
BUSY	D7	D7

Install Arduino IDE

arduino IDE Install Guide

Run the Program

Download the program on the product encyclopedia interface, and then unzip it. Arduino programs are located at ~/Arduino/…

Please select the corresponding program to open according to the ink screen model

Supporting types

1.02inch（128×80）：

epd_1in02y：Example for 1.02inch e-Paper/1.02inch e-Paper Module

1.54inch（1.54inch e-paper c：152×152，others：200×200）：

epd_1in54： Example for 1.54inch e-paper V1（Balck/White）: This version is stopped production which can be bought before 2019-11-22；
epd_1in54_V2： Example for 1.54inch e-paper V2（Balck/White): This is the current version which can be bought now (2020-07-29). The e-Paper has V2 sticker on the backside.
epd_1in54b： Example for 1.54inch e-paper B（Black/White/Red）;
epd_1in54b_V2： Example for 1.54inch e-paper B V2（Black/White/Red）;
epd_1in54c： Example for 1.54inch e-paper C（Black/White/Red）;br />

2.7inch（264×176）：

epd_2in7： Example for 2.7inch e-paper（Black/White）;
epd_2in7b： Example for 2.7inch e-paper B（Black.White/Red）;
epd_2in7b_V2： Example for 2.7inch e-paper B V2（Black.White/Red）;

2.9inch（296×128）：

epd_2in9: Example for 2.9inch e-paper（Black/White）;
epd_2in9_V2: Example for 2.9inch e-paper V2（Black/White）;
epd_2in9bc： Example for 2.9inch e-paper B（Balck/White/Red） and 2.9inch e-paper C（Black/White/Yellow）;
epd_2in9b_V3： Example for 2.9inch e-paper B V3（Balck/White/Red;
epd_2in9d： Example for 2.9inch e-paper D（Black/White）;

2.13inch（2.13inch e-Paper：250×122，others：212×104）：

epd_2in13： Example for 2.13inch e-paper V1（Black/White）, this version is stopped production and it can be bought before 019-05-15;
epd_2in13_V2y： Example for 2.13inch e-paper V2（Black/White） This is the current version with sticker V2 on the backside (2020-07-29)；
epd_2in13bc： Example for 2.13inch e-paper B（Black/White/Red）and 2.13inch e-paper C（Black/White/Yellow）;
epd_2in13b_V3： Example for 2.13inch e-paper B V3（Black/White/Red）
epd_2in13d： Example for 2.13inch e-paper D（Black/White）;

2.66inch (152 x 296)

epd_2in66: Example for 2.66inch e-Paper (Black/White);
epd_2in66b: Example for 2.66inch e-Paoer (Black/White/Red);

3.7inch (280 x 480)

epd_3in7: Example for 3.7inch e-Paper (Black/White);

4.01inch (640x400)

epd_4in01f: Example for 4.01inch e-Paper (Seven-color);

4.2inch（400×300）

epd_4in2： Example for 4.2inch e-paper（Black/White）；
epd_4in2bc： Example for 4.2inch e-paper B（Black/White/Red）；
epd_4in2b_V2： Example for 4.2inch e-paper B V2（Black/White/Red）；

5.65inch (600x448)

epd_5in65f: Example for 5.65inch e-Paper F (Seven-color);

5.83inch（600×448）：

epd_5in83： Example for 5.83inch e-paper（Black/White）；
epd_5in83_V2： Example for 5.83inch e-paper V2（Black/White）；
epd_5in83bc： Example for 5.83inch e-paper B（Black/White/Red）and 5.83inch e-paper C（Black/White/Yellow）;
epd_5in83b_V2： Example for 5.83inch e-paper B V2（Black/White/Red)

7.5inch（V1：640×384， V2：800×480）：

epd_7in5： Example for 7.5inch e-paper（Black/White）, this version is stopped production and it can be bought before 2019-12-07；
epd_7in5_V2： Example for 7.5inch e-paper V2（Black/White）, This is the current version with V2 sticker on the backside (2020-07-29)
epd_7in5bc： Example for 7.5inch e-paper B（Black/White/Red）and 7.5inch e-paper C（Black/White/Yellow），7.5inch e-paper B V1 version is stopped production and it can be bought before 2019-12-07;
epd_7in5b_V2： Example for 7.5inch e-paper B V2（Black/White/Red）; This is the current version with V2 sticker on the backside. (2020-07-29);

7.5inch (HD 880 x 528)

epd_7in5_HD: Example for 7.5inch e-Paper HD (Black/White);
epd_7in5b_HD: Example for 7.5inch e-Paper B HD (Black/White/Red);
*Note: The above time is for reference only, please refer to the screen logo for the specific version
For example, 1.54inch e-Paper Module. Open the epd1in54 folder and run the epd1in54.ino file.
Open the program, select the development board model Arduino UNO

Select the corresponding COM port

Then click compile and download

Since the flash of arduino UNO is very small, several large-size screens use MEGA2560 for better results:<

Code Description

Files

Take the 1.54-inch ink screen controlled by Arduino UNO as an example, open the epd1in54 directory:

in which:
epd1in54.ino: open with Arduino IDE;
epd1in54.cpp(.h): is the driver of the ink screen;
epdif.cpp(.h): is the hardware interface definition, which encapsulates the read and write pin levels, SPI data transmission, and pin initialization;
font8.cpp, font12.cpp, font16.cpp, font20.cpp, font24.cpp, fonts.h: are the models of characters of different sizes;
imagedata.cpp(.h): is the image data, which can convert the 2-bit depth BMP image into an array through Img2Lcd (downloadable in the development data).
The program is divided into the bottom hardware interface, the middle layer ink screen driver, and the upper layer application;

Bottom Hardware Interface

hardware interfaces are defined in epdif.cpp(.h) file

Write GPIO

void DigitalWrite(int pin, int value)

The first parameter is GPIO, and second parameter is level

Read GPIO

int DigitalRead(int pin)

The parameter is GPIO, and return value is level

Delay

DelayMs(unsigned int delaytime)

Delay time, unit is ms

SPI transmit data

SpiTransfer(unsigned char data)

Type of parameter is char

Hardware initailze

int IfInit(void)

The initialize function of SPI, input/ouptu are packaged here。

Middle EPD driver

Instantiate e-Paper class

The Arduino codes are based on C++, should instantiate e-Paper class is necessary.

Epd epd;

Initialize e-Paper, it should be used to initialize e-Paper or wakeup e-Paper from sleep mode.

• 2.13inch e-Paper，2.9inch e-Paper

epd.Init(lut_full_update); //Fully update
epd.Init(lut_partial_update); //Partial update

• 4.2inch e-Paper

epd.Init();

Clear, clear the e-Paper to white

epd.clear();

In some of project, the operation is divided to two part, they work in the same way

epd.ClearFrameMemory(0xFF); 
epd.DisplayFrame();//Display it

Transmit one frame of image and display

void Display(const unsigned char* frame_buffer);
void DisplayFrame(const unsigned char* frame_buffer_black, const unsigned char* frame_buffer_red); //Three color e-Paper

Sleep

epd.Sleep();

Set the e-Paper enter sleep mode. The consumption of the e-Paper will be reduced. However, you still need to update the display periodically to avoid a ghost problem.

Application functions

The drawing functions are defined in this part.
The coordination of the image buffer：

The functions are defined in epdpaint.h file

Initailze image buffer

Paint(unsigned char* image, int width, int height);

The first parameter is image buffer, the second one is the width of the picture, and the third one is the height.

Paint paint(image, 0, 0);    // width should be the multiple of 8

The second and third parameters are set to 0, you can re-configure them with functions below:

Set the width, height, rotate degree.

int  GetWidth(void); //Get the width
void SetWidth(int width);//Set the width
int  GetHeight(void);//Get the height
void SetHeight(int height);//Set the height
int  GetRotate(void);//Get the degree
void SetRotate(int rotate);//Set the rotate degree

Get the image data

unsigned char* GetImage(void);

Draw circle

void DrawPixel(int x, int y, int colored);

Coordination（x,y）

Draw characater

void DrawCharAt(int x, int y, char ascii_char, sFONT* font, int colored);

Set（x,y）as the start point, draw characters ascii_char, set the fonts as font, color is colored.

Draw string

void DrawStringAt(int x, int y, const char* text, sFONT* font, int colored);

Set（x,y）as the start point, draw the string text, font is font，color is colored

Draw line

void DrawLine(int x0, int y0, int x1, int y1, int colored);

Use （x0,y0）as start point, （x1,y1） as end point;

Draw cross line

void DrawHorizontalLine(int x, int y, int width, int colored);

Set（x0,y0）as start points，draw a line, the widht is width, and color is colored</ br>

Draw a vertical line

void DrawVerticalLine(int x, int y, int height, int colored);

Use（x0,y0） as start point, draw a vertical line, width is height and color is colored./ br>

Draw a empty rectangle

void DrawRectangle(int x0, int y0, int x1, int y1, int colored);

User（x0,y0） as start point,（x1,y1）is end point, draw a rectangel, color of edges are colored.

Draw a full rectangle

void DrawFilledRectangle(int x0, int y0, int x1, int y1, int colored);

Use（x0,y0）as start point, （x1,y1） is end point, draw a rectange, filled it with color: colored

Draw an empty circle

void DrawCircle(int x, int y, int radius, int colored);

Use （x,y）as center，draw a empty circle with radius, color is colored

Draw a full circle

void DrawFilledCircle(int x, int y, int radius, int colored);

Use （x,y）as center, draw a circle, radius is radius, filled with color: colored

Raspberry Pi

Hardware connection

If the board you get is the HAT version like 2.13inch e-Paper HAT, you can directly attach it on the 40PIN GPIO of Raspberry Pi. Or you can wire it to Raspberry Pi with 8PIN cable.

Connect to Raspberry Pi

e-Paper	Raspberry Pi
	BCM2835	Board
VCC	3.3V	3.3V
GND	GND	GND
DIN	MOSI	19
CLK	SCLK	23
CS	CE0	24
DC	25	22
RST	17	11
BUSY	24	18

Enable SPI interface

PS: If you are using a system with a Bullseye branch, you need to change "apt-get" to "apt", and the system of the Bullseye branch only supports Python3.

• Open the terminal, and use the command to enter the configuration page.
  

sudo raspi-config
Choose Interfacing Options -> SPI -> Yes  to enable the SPI interface

Reboot Raspberry Pi：

sudo reboot

Make sure that the SPI is not occupied by other devices, you can check in the middle of the /boot/config .txt.

• Check /boot/config.txt, and you can see 'dtparam=spi=on' was written in.

• To make sure SPI is not occupied, it is recommended to close other drivers' coverage. You can use ls /dev/spi* to check whether SPI is occupied. If the terminal outputs /dev/spidev0.1 and /dev/spidev0.1, SPI is not occupied.

Libraries Installation

• Install BCM2835 libraries

#Open the Raspberry Pi terminal and run the following command
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.71.tar.gz
tar zxvf bcm2835-1.71.tar.gz
cd bcm2835-1.71/
sudo ./configure && sudo make && sudo make check && sudo make install
# For more information, please refer to the official website: http://www.airspayce.com/mikem/bcm2835/

• Install wiringPi libraries

#Open the Raspberry Pi terminal and run the following command
sudo apt-get install wiringpi
#For Raspberry Pi systems after May 2019 (earlier than before, you may not need to execute), you may need to upgrade:
wget https://project-downloads.drogon.net/wiringpi-latest.deb
sudo dpkg -i wiringpi-latest.deb
gpio -v
# Run gpio -v and version 2.52 will appear. If it does not appear, the installation is wrong

#Bullseye branch system use the following command:
git clone https://github.com/WiringPi/WiringPi
cd WiringPi
./build
gpio -v
# Run gpio -v and version 2.60 will appear. If it does not appear, it means that there is an installation error

• Install Python libraries

#python2
sudo apt-get update
sudo apt-get install python-pip
sudo apt-get install python-pil
sudo apt-get install python-numpy
sudo pip install RPi.GPIO
sudo pip install spidev
#python3
sudo apt-get update
sudo apt-get install python3-pip
sudo apt-get install python3-pil
sudo apt-get install python3-numpy
sudo pip3 install RPi.GPIO
sudo pip3 install spidev

Note: if you install on Raspian Lite, the git package is not istalled by default.

• Install git

sudo apt-get install git -y

Download examples

Open the Raspberry Pi terminal and execute:
Method 1: Download from our official website

sudo apt-get install p7zip-full
wget https://www.waveshare.net/w/upload/3/39/E-Paper_code.7z
7z x E-Paper_code.7z -O./e-Paper
cd e-Paper/RaspberryPi_JetsonNano/

Method 2: Use the github repository

git clone https://github.com/waveshare/e-Paper
cd e-Paper/RaspberryPi_JetsonNano/

Examples

C

Open main.c to select the screen of the corresponding size

cd c
sudo nano examples/main.c

If you are using 2.7inch e-paper, then remove the // in front of the EPD_2IN7_test() function, then press ctrl+c, press the Y key and Enter to save and exit, as shown in the figure: (The picture may not be updated. Timely, subject to the specific demo)
Supporting types:

1.02inch（128×80）：

EPD_1in02d_test()：Example for 1.02inch e-Paper/1.02inch e-Paper Module

1.54inch（1.54inch e-paper c：152×152，others：200×200）：

EPD_1in54_test()： Example for 1.54inch e-paper V1（Balck/White）: This version is stopped production which can be bought before 2019-11-22；
EPD_1in54_V2_test(): Example for 1.54inch e-paper V2（Balck/White): This is the current version that can be bought now (2020-07-29). The e-Paper has V2 sticker on the backside.
EPD_1in54b_test()： Example for 1.54inch e-paper B（Black/White/Red）;
EPD_1in54b_V2_test(): Example for 1.54inch e-Paper B V2 (Black/White/Red);
EPD_1in54c_test()： Example for 1.54inch e-paper C（Black/White/Red）;

2.7inch（264×176）：

EPD_2in7_test()： Example for 2.7inch e-paper（Black/White）;
EPD_2in7b_test()： Example for 2.7inch e-paper B（Black.White/Red）;
EPD_2in7b_V2_test()： Example for 2.7inch e-paper B V2（Black.White/Red）;

2.9inch（296×128）：

EPD_2in9_test(): Example for 2.9inch e-paper（Black/White）;
EPD_2in9_V2_test(): Example for 2.9inch e-paper V2（Black/White）;
EPD_2in9bc_test()： Example for 2.9inch e-paper B（Balck/White/Red） and 2.9inch e-paper C（Black/White/Yellow）;
EPD_2in9b_V3_test()： Example for 2.9inch e-paper B V3 （Balck/White/Red）;
EPD_2in9d_test()： Example for 2.9inch e-paper D（Black/White）;

2.13inch（2.13inch e-Paper：250×122，others：212×104）：

EPD_2in13_test()： Example for 2.13inch e-paper V1（Black/White）, this version is stopped production and it can be bought before 019-05-15;
EPD_2in13_V2_test()： Example for 2.13inch e-paper V2（Black/White） This is the current version with sticker V2 on the backside (2020-07-29)；
EPD_2in13_V3_test()： Example for 2.13inch e-paper V3（Black/White） This is the current version with sticker V3 on the backside (2020-07-29)；
EPD_2in13bc_test()：Example for 2.13inch e-paper B（Black/White/Red）and 2.13inch e-paper C（Blackj/White/Yellow）;
EPD_2in13b_V3_test()：Example for 2.13inch e-paper B V3（Black/White/Red）
EPD_2in13d_test()： Example for 2.13inch e-paper D（Black/White）;

2.66inch (152 x 296)

EPD_2in66_test(): Example for 2.66inch e-Paper (Black/White);
EPD_2in66b_test(): Example for 2.66inch e-Paper B (Black/White/Red);

3.7inch (280 x 480)

EPD_3in7_test(): Example for 3.7inch e-Paper(Black/White);

4.01inch (640x400)

EPD_4in01_test(): Example for the 4.01inch e-Paper HAT (F);

4.2inch（400×300）

EPD_4in2_test()： Example for 4.2inch e-paper（Black/White）；
EPD_4in2bc_test()： Example for 4.2inch e-paper B（Black/White/Red）；
EPD_4in2b_V2_test()： Example for 4.2inch e-paper B V2（Black/White/Red）；

5.65inch (600x448)

EPD_5in65f_test(): Example for for 5.65inch e-Paper F (Seven-color);

5.83inch（600×448）：

EPD_5in83_test()： Example for 5.83inch e-paper（Black/White）；
EPD_5in83_V2_test()： Example for 5.83inch e-paper V2（Black/White）；
EPD_5in83bc_test()： Example for 5.83inch e-paper B（Black/White/Red）and 5.83inch e-paper C（Black/White/Yellow）;
EPD_5in83b_V2_test()： Example for 5.83inch e-paper B V2（Black/White/Red）

7.5inch（V1：640×384， V2：800×480）：

EPD_7in5_test()： Example for 7.5inch e-paper（Black/White）, this version is stopped production and it can be bought before 2019-12-07；
EPD_7in5bc_test()： Example for 7.5inch e-paper B（Black/White/Red）and 7.5inch e-paper C（Black/White/Yellow），7.5inch e-paper B V1 version is stop production and it can be bought before 2019-12-07;
EPD_7in5_V2_test()： Example for 7.5inch e-paper V2（Black/White）, This is the current version with V2 sticker on the backside (2020-07-29)
EPD_7in5bc_V2_test()：Example for 7.5inch e-paper B V2（Black/White/Red）; This is the current version with V2 sticker on the backside. (2020-07-29);

7.5inch (HD

880 x 528)

EPD_7in5_HD_test(): Example for 7.5inch e-Paper HD (Black/White);
EPD_7in5b_HD_test(): Example for 7.5inch e-Paper B HD (Black/White/Red);

*Note: The above time is for reference only, please refer to the screen logo for the specific version

• Recompile, the compilation process may take a few seconds
  

Return to the c directory and run the following command
make clean
make
sudo ./epd

Python

PS: The system of the Bullseye branch only supports Python3.

• Enter the folder of python code

cd python/examples
ls -al

• Run the responding example

sudo python epd_xxx_test.py
sudo python3 epd_xxx_test.py

Supporting types:

1.02inch（128×80）：

epd_1in02_test.py：Example for 1.02inch e-Paper/1.02inch e-Paper Module

1.54inch（1.54inch e-paper c：152×152，others：200×200）：

epd_1in54_test.py： Example for 1.54inch e-paper V1（Balck/White）: This version is stopped production which can be bought before 2019-11-22；
epd_1in54_V2_test.py： Example for 1.54inch e-paper V2（Balck/White): This is the current version which can be bought now (2020-07-29). The e-Paper has V2 sticker on the backside.
epd_1in54b_test.py： Example for 1.54inch e-paper B（Black/White/Red）;
epd_1in54b_V2_test.py： Example for 1.54inch e-paper B V2（Black/White/Red）;
epd_1in54c_test.py： Example for 1.54inch e-paper C（Black/White/Red）;br />

2.7inch（264×176）：

epd_2in7_test.py： Example for 2.7inch e-paper（Black/White）;
epd_2in7b_test.py： Example for 2.7inch e-paper B（Black.White/Red）;
epd_2in7b_V2_test.py： Example for 2.7inch e-paper B V2（Black.White/Red）;

2.9inch（296×128）：

epd_2in9_test.py: Example for 2.9inch e-paper（Black/White）;
epd_2in9_V2_test.py: Example for 2.9inch e-paper V2（Black/White）;
epd_2in9bc_test.py： Example for 2.9inch e-paper B（Balck/White/Red） and 2.9inch e-paper C（Black/White/Yellow）;
epd_2in9b_V3_test.py： Example for 2.9inch e-paper B V3（Balck/White/Red;
epd_2in9d_test.py： Example for 2.9inch e-paper D（Black/White）;

2.13inch（2.13inch e-Paper：250×122，others：212×104）：

epd_2in13_test.py： Example for 2.13inch e-paper V1（Black/White）, this version is stopped production and it can be bought before 019-05-15;
epd_2in13_V2_test.py： Example for 2.13inch e-paper V2（Black/White） This is the current version with sticker V2 on the backside (2020-07-29)；
epd_2in13bc_test.py： Example for 2.13inch e-paper B（Black/White/Red）and 2.13inch e-paper C（Black/White/Yellow）;
epd_2in13b_V3_test.py： Example for 2.13inch e-paper B V3（Black/White/Red）
epd_2in13d_test.py： Example for 2.13inch e-paper D（Black/White）;

2.66inch (152 x 296)

epd_2in66_test.py: Example for 2.66inch e-Paper (Black/White);
epd_2in66b_test.py: Example for 2.66inch e-Paoer (Black/White/Red);

3.7inch (280 x 480)

epd_3in7_test.py: Example for 3.7inch e-Paper (Black/White);

4.01inch (640x400)

epd_4in01f_test.py: Example for 4.01inch e-Paper (Seven-color);

4.2inch（400×300）

epd_4in2_test.py： Example for 4.2inch e-paper（Black/White）；
epd_4in2bc_test.py： Example for 4.2inch e-paper B（Black/White/Red）；
epd_4in2b_V2_test.py： Example for 4.2inch e-paper B V2（Black/White/Red）；

5.65inch (600x448)

epd_5in65f_test.py: Example for 5.65inch e-Paper F (Seven-color);

5.83inch（600×448）：

epd_5in83_test.py： Example for 5.83inch e-paper（Black/White）；
epd_5in83_V2_test.py： Example for 5.83inch e-paper V2（Black/White）；
epd_5in83bc_test.py： Example for 5.83inch e-paper B（Black/White/Red）and 5.83inch e-paper C（Black/White/Yellow）;
epd_5in83b_V2_test.py： Example for 5.83inch e-paper B V2（Black/White/Red)

7.5inch（V1：640×384， V2：800×480）：

epd_7in5_test.py： Example for 7.5inch e-paper（Black/White）, this version is stopped production and it can be bought before 2019-12-07；
epd_7in5_V2_test.py： Example for 7.5inch e-paper V2（Black/White）, This is the current version with V2 sticker on the backside (2020-07-29)
epd_7in5bc_test.py： Example for 7.5inch e-paper B（Black/White/Red）and 7.5inch e-paper C（Black/White/Yellow），7.5inch e-paper B V1 version is stopped production and it can be bought before 2019-12-07;
epd_7in5b_V2_test.py： Example for 7.5inch e-paper B V2（Black/White/Red）; This is the current version with V2 sticker on the backside. (2020-07-29);

7.5inch (HD 880 x 528)

epd_7in5_HD_test.py: Example for 7.5inch e-Paper HD (Black/White);
epd_7in5b_HD_test.py: Example for 7.5inch e-Paper B HD (Black/White/Red);

Note: The above time is for reference only, please refer to the screen logo for the specific version
Just run the program corresponding to the screen, the program supports python2/3, take 1.54 V2 as an example

# python2
sudo python2.7 epd_1in54_V2_test.py
# python3
sudo python3 epd_1in54_V2_test.py

Jetson Nano Developer Kit

The example for Jetson Nano use software SPI, speed of sfotware SPI is a little slow

Hardware connection

Jetson Nano's 40PIN GPIO is compatible with Raspberry PI, and API of Jetson.GPIo is same as RPi.GPIO, therefore, the pin numbers of Jetson nano are same as Raspberry Pi's

Connect to Jetson Nano

e-Paper	Jetson Nano Developer Kit
	BCM2835	Board
VCC	3.3V	3.3V
GND	GND	GND
DIN	10(SPI0_MOSI)	19
CLK	11(SPI0_SCK	23
CS	8(SPI0_CS0)	24
DC	25	22
RST	17	11
BUSY	24	18

Software setting

• Open terminal, and install GPIO libraries :

sudo apt-get update
sudo apt-get install python3-pip
sudo pip3 install Jetson.GPIO
sudo groupadd -f -r gpio
sudo usermod -a -G gpio your_user_name
sudo cp /opt/nvidia/jetson-gpio/etc/99-gpio.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules && sudo udevadm trigger

Note： your_user_name is the user name of your Jetson, for example:waveshare

• Install I2C libraries

sudo apt-get install python-smbus

• Install PIL libraries

sudo apt-get install python3-pil
sudo apt-get install python3-numpy

Download examples

Open terminal and execute commands:

sudo git clone https://github.com/waveshare/e-Paper
cd e-Paper/RaspberryPi\&JetsonNano/

Running examples

• C codes

Find main.c file, Open it and uncommend the e-Paper which you use, compile and run it

cd c
make clear
make
sudo ./epd

• python

Run examples, xxx is the name of e-Paper. For example, if you want to run examples of 1.54inch e-Paper Module, xxx should be epd_1in54

cd python/examples
# python2
sudo python xxx.py
# python3
sudo python3 xxx.py

STM32

Hardware connection

The examples we provide are based on Wavshare Open103Z, the connecting method provide is based on STM32F13ZET6 as well. For other board, please port it by yourself.

Connect to STM32F103ZET6

e-Paper	STM32F103ZET6
Vcc	3.3V
GND	GND
DIN	PA7
CLK	PA5
CS	PA3
DC	PA2
RST	PA1
BUSY	PA3

Running examples

Enter the directly of STM32 examples, open project by Keil5 software. Set Board and programmer, then compile and download it to board