Difference between revisions of "Template:GSM/GPRS/GPS HAT User Manual"

From Waveshare Wiki
Jump to: navigation, search
Line 3: Line 3:
 
== How to use ==
 
== How to use ==
 
=== Hardware configuration ===
 
=== Hardware configuration ===
[[File:GSM-GPRS-GNSS-UM-1.jpg|thumb|400px|1.SIM card connection]]
+
[[File:GSM-GPRS-GNSS-UM-1.jpg|thumb|300px|1.SIM card connection]]
[[File:GSM-GPRS-GNSS-UM-2.jpg|thumb|400px|2.Hardware connection]]
+
[[File:GSM-GPRS-GNSS-UM-2.jpg|thumb|300px|2.Hardware connection]]
[[File:GSM-GPRS-GNSS-UM-3.jpg|thumb|400px|3.Devices Manager]]
+
[[File:GSM-GPRS-GNSS-UM-3.jpg|thumb|300px|3.Devices Manager]]
[[File:GSM-GPRS-GNSS-UM-4.jpg|thumb|400px|4.Power on]]
+
[[File:GSM-GPRS-GNSS-UM-4.jpg|thumb|300px|4.Power on]]
 
This module comes with power adapter, micro USB cable, GSM antenna, GPS antenna and Bluetooth antenna. Besides these you should prepare two more things:
 
This module comes with power adapter, micro USB cable, GSM antenna, GPS antenna and Bluetooth antenna. Besides these you should prepare two more things:
 
*A SIM card, the card should be usable and GPRS access (for testing the GPRS)
 
*A SIM card, the card should be usable and GPRS access (for testing the GPRS)

Revision as of 10:18, 14 September 2017


How to use

Hardware configuration

1.SIM card connection
2.Hardware connection
3.Devices Manager
4.Power on

This module comes with power adapter, micro USB cable, GSM antenna, GPS antenna and Bluetooth antenna. Besides these you should prepare two more things:

  • A SIM card, the card should be usable and GPRS access (for testing the GPRS)
  • An earphone with a microphone on it (For testing Call function)
  1. Insert the SIM card to the card slot, plug the earphone and connect the GSM antenna
  2. Install CP2102 driver, plug the jumper B, and connect the USB to UART interface of GSM/GPRS/GNSS HAT to PC with a micro USB cable. Then the PWR indicator will keep bright.
  3. Open Device Manager to get the corresponding COM port number of CP2102. For example, it is COM7 as below. Users need to choose the correct port according to the Manager.
  4. Press the PWRKEY button and hold for 1s, the NET indicator will blink as below. Generally, the NET indicator will fast flash firstly (1 time per second), which means that the module has not logged in the Network. After logging in, the indicator become to flash slowly (1 time every three seconds). Up to the local GSM network, this process that logging in will last several seconds to dozens of seconds.
    If you take too much time to log in and failed, please check that whether the GSM antenna is connected correctly, and whether the SIM card is usable and insert correctly.

GSM Debugging