Template: Flexible-e-paper-FAQ
From Waveshare Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Answer:
- Note that you cannot bend the IC part, only the display area can be bent(>60°). Area marked in red cannot be bent.
- The circuity area on the corners of e-Paper cannot be bent too much times, please be careful. Recommend you to use Vcacuum Pen or stick it by sticker when picking it up
- Please make sure there are not particulate matters on both sides of the e-paper panel. You can only bend the flexible e-paper forward and backward, but not in left and right direction.
- The flexible e-Paper is covered by hot melt film, the penal should not touch sharp objects, otherwise, it may be damaged
- The object temperature cannot reach 70°C, otherwise, e-Paper will be damaged
- If you want to test the bending of flexible e-Paper, you can make a fan-shaped mold whose central angle is 60°and radius is about 5cm