Template: E-paper setup

From Waveshare Wiki
Revision as of 08:56, 11 August 2022 by Eng52 (talk | contribs) (→‎Hardware Connection)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Hardware Connection

This product is shipped with an ESP32 network driver board, an adapter board, and an FFC extension cable.
When using it, you can directly connect the screen to the driver board, or connect it through extension cables and adapter boards.
Direct access to the driver board:
Esp32001.jpg
Access via extension cord:
Esp32002.jpg

  • Set the mode switch: Set the No. 1 switch according to the model of the EPD used. There are many screens. If it is not listed, please use 'A' to try. If the display effect is poor or cannot be driven, please try switching the switch.

Esp32 pre003.jpg

Retrieved from "https://www.waveshare.com/w/index.php?title=Template:E-paper_setup&oldid=45175"