Difference between revisions of "Template:E-paper setup"
From Waveshare Wiki
| Line 2: | Line 2: | ||
This product is shipped with an ESP32 network driver board, an adapter board, and an FFC extension cable.<br/> | This product is shipped with an ESP32 network driver board, an adapter board, and an FFC extension cable.<br/> | ||
When using it, you can directly connect the screen to the driver board, or connect it through extension cables and adapter boards.<br/> | When using it, you can directly connect the screen to the driver board, or connect it through extension cables and adapter boards.<br/> | ||
| − | < | + | Direct access to the driver board:<br/> |
| − | File:Esp32001.jpg|400px | + | [[File:Esp32001.jpg|400px]]<br/> |
| − | File:Esp32002.jpg|400px | + | Access via extension cord:<br/> |
| − | </ | + | [[File:Esp32002.jpg|400px]]<br/> |
| + | |||
*Set the mode switch: Set the No. 1 switch according to the model of the EPD used. There are many screens. If it is not listed, please use 'A' to try. If the display effect is poor or cannot be driven, please try switching the switch. | *Set the mode switch: Set the No. 1 switch according to the model of the EPD used. There are many screens. If it is not listed, please use 'A' to try. If the display effect is poor or cannot be driven, please try switching the switch. | ||
[[File:Esp32 pre003.jpg|300px]] | [[File:Esp32 pre003.jpg|300px]] | ||
Latest revision as of 08:56, 11 August 2022
Hardware Connection
This product is shipped with an ESP32 network driver board, an adapter board, and an FFC extension cable.
When using it, you can directly connect the screen to the driver board, or connect it through extension cables and adapter boards.
Direct access to the driver board:
Access via extension cord:
- Set the mode switch: Set the No. 1 switch according to the model of the EPD used. There are many screens. If it is not listed, please use 'A' to try. If the display effect is poor or cannot be driven, please try switching the switch.
