Template: Capacitive Fingerprint Reader B Spec
From Waveshare Wiki
Revision as of 07:38, 14 October 2021 by Waveshare-eng11 (talk | contribs) (Created page with "==Overview== The Capacitive Fingerprint Reader (B) is a fast and stable capacitive fingerprint module specialized for secondary development, suits integration applications.<br...")
Overview
The Capacitive Fingerprint Reader (B) is a fast and stable capacitive fingerprint module specialized for secondary development, suits integration applications.
By incorporating a high-performance Cortex core processor, high-security commercial fingerprint algorithm, and advanced semiconductor fingerprint sensor, this module is designed as an intelligent integration module with functions including fingerprint enrolling, image processing, the template generating and storing, fingerprint matching and searching, etc.
Features
- Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure/calculation
- Commercial fingerprinting algorithm, stable performance, fast identification
- Sensitive detection, just touch the collecting window lightly, without pressing
- Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions
- Dual communication, UART or USB
Specifications
PARAMETER | VALUE |
Sensor | Semiconductor(capacitive) |
Module dimension | 34 x 28.5mm |
Sensor dimension | 33.4 x 20.4mm |
Image | DPI508 |
Image resolution | 208x288 |
Greyscale | 256(8-bit) |
Sensing area | 14.6 x 10.6mm |
Fingerprint capacity | 3000 |
Security level | 1-5 configurable, 3 by default the higher value, the lower FAR (False Acceptance Rate), yet the higher FRR (False Rejection Rate) |
Encryption key | 64-bit encryption |
Image collecting rate | 20fps |
Matching time | 0.5s |
Dynamic current | <40mA |
Operating voltage | 3.3 - 5V |
Communication port | UART or USB |
ESD | SD IEC 61000-4-2 LEVEL 4 positive/negative 15KV air discharge |
Baudrate | configurable: 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600bps 115200bps by default |
Pinouts
- VCC: Power input (3.3V/5V)
- GND: Ground
- RX: UART data input
- TX: UART data output
- RST: Reset pin
- High: Power on fingerprint module
- Low: Power off fingerprint module