Template: CM4-DISP-BASE-2.8A Spec

From Waveshare Wiki
Revision as of 07:17, 17 March 2022 by Waveshare-eng11 (talk | contribs) (Created page with "==Overview== This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be us...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-inch IPS display, which can meet the operation of various versions of CM4, and supports camera and video output.

Notices

1: The display uses the DIP interface instead of the HDMI interface
2: Please use a 5V/4A or higher power adapter.

Dimensions

CM4-DISP-BASE-2.8A-details-size.jpg
500px

Touch Screen Expansion Board

CM4-DISP-BASE-2.8A-details-5.jpg
CM4 Socket suitable for all variants of Compute Module 4
USB USB 2.0 x1
Connector MIPI CSI 22PIN 0.5mm camera connector
Display 2.8inch fully laminated screen, 480 x 640 pixels, 6-point capacitive touch, toughened glass panel
Video micro HDMI x 1, supports 4K 30fps output
Storage Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Power input 5V

Optional Interface Expander Introduction

CM4-DISP-BASE-2.8A-details-7.jpg
Networking Gigabit Ethernet RJ45
USB USB2.0 x3