Difference between revisions of "Template:CM4-DISP-BASE-2.8A Spec"
From Waveshare Wiki
(Created page with "==Overview== This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be us...") |
|||
Line 6: | Line 6: | ||
==Dimensions== | ==Dimensions== | ||
:[[File:CM4-DISP-BASE-2.8A-details-size.jpg|500px]] | :[[File:CM4-DISP-BASE-2.8A-details-size.jpg|500px]] | ||
− | + | ||
==Touch Screen Expansion Board== | ==Touch Screen Expansion Board== | ||
:[[File:CM4-DISP-BASE-2.8A-details-5.jpg|500px]] | :[[File:CM4-DISP-BASE-2.8A-details-5.jpg|500px]] |
Revision as of 08:30, 17 March 2022
Overview
This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-inch IPS display, which can meet the operation of various versions of CM4, and supports camera and video output.
Notices
1: The display uses the DIP interface instead of the HDMI interface
2: Please use a 5V/4A or higher power adapter.
Dimensions
Touch Screen Expansion Board
CM4 Socket | suitable for all variants of Compute Module 4 |
---|---|
USB | USB 2.0 x1 |
Connector | MIPI CSI 22PIN 0.5mm camera connector |
Display | 2.8inch fully laminated screen, 480 x 640 pixels, 6-point capacitive touch, toughened glass panel |
Video | micro HDMI x 1, supports 4K 30fps output |
Storage | Micro SD card socket for Compute Module 4 Lite (without eMMC) variants |
Power input | 5V |
Optional Interface Expander Introduction
Networking | Gigabit Ethernet RJ45 |
---|---|
USB | USB2.0 x3 |