Difference between revisions of "Template:CM4-DISP-BASE-2.8A Spec"
From Waveshare Wiki
| Line 1: | Line 1: | ||
| − | + | =Overview= | |
| − | This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-inch IPS display, which can meet the operation of various versions of CM4, and supports camera and video output. | + | This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-inch IPS display, which can meet the operation of various versions of CM4, and supports camera and video output. |
| + | |||
==Notices== | ==Notices== | ||
1: The display uses the DIP interface instead of the HDMI interface <br /> | 1: The display uses the DIP interface instead of the HDMI interface <br /> | ||
Revision as of 10:55, 13 July 2022
Overview
This product is a specially designed 2.8-inch CM4 touch screen expansion board for Raspberry Pi Compute Module 4. CM4-DISP-BASE-2.8A is a baseboard that can be used with Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-inch IPS display, which can meet the operation of various versions of CM4, and supports camera and video output.
Notices
1: The display uses the DIP interface instead of the HDMI interface
2: Please use a 5V/4A or higher power adapter.
Dimensions
Touch Screen Expansion Board
| CM4 Socket | suitable for all variants of Compute Module 4 |
|---|---|
| USB | USB 2.0 x1 |
| Connector | MIPI CSI 22PIN 0.5mm camera connector |
| Display | 2.8inch fully laminated screen, 480 x 640 pixels, 6-point capacitive touch, toughened glass panel |
| Video | micro HDMI x 1, supports 4K 30fps output |
| Storage | Micro SD card socket for Compute Module 4 Lite (without eMMC) variants |
| Power input | 5V |
Optional Interface Expander Introduction
| Networking | Gigabit Ethernet RJ45 |
|---|---|
| USB | USB2.0 x3 |