Template: ARPI600 Description

From Waveshare Wiki
Jump to: navigation, search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this.

What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great project.

Supported Pi

ARPI600 Features

  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
  • Onboard ADC, 10 bit, 38KSPS, 11 channels (6 channels for Arduino interface, 5 channels for sensors)
  • Onboard RTC

What's on the ARPI600

What's on the ARPI600
  1. Raspberry Pi Expansion Board on board resource
  2. Arduino connector : for connecting Arduino shields
  3. ICSP interface : Arduino ICSP
  4. XBee connector : for connecting XBee communication modules
  5. Sensor interface : for connecting sensors
  6. Raspberry Pi connector : for connecting Raspberry Pi
  7. USB TO UART
  8. TLC1543 : AD converter
  9. PCF8563 : RTC
  10. CP2102
  11. 32.768KHz crystal : for RTC
  12. Power indicator
  13. XBee state LED
  14. XBee and Arduino interface RESET button
  15. XBee EASYLINK button
  16. RTC battery holder : for CR1220 button battery
  17. TLC1543 reference voltage configuration jumper
  18. RTC jumper
  19. UART jumper
    • when connecting P_RX and CP_TX, P_TX and CP_RX respectively, USB TO UART is connected to Raspberry Pi serial port
    • when connecting XB_RX and CP_TX, XB_TX and CP_RX respectively, USB TO UART is connected to XBee serial port
    • when connecting XB_RX and P_TX, XB_TX and P_RX respectively, Raspberry Pi serial port is connected to XBee serial port
  20. Arduino AD selection jumper
    • short 2 and 3 : Arduino A0-A5 as AD input
    • short 1 and 2 : Arduino A0-A5 as digital control
  21. Arduino I2C selection jumper
    • short the jumper : Arduino A4-A5 as I2C control (the A4-A5 of Arduino AD selection jumper should be opened)
  22. Arduino SPI selection jumper
    • short 1 and 2 : Arduino D11-D13 as SPI control (default)
    • short 2 and 3 : Arduino D11-D13 as digital control