Difference between revisions of "Template:7inch-FHD-Monitor-Manual"

From Waveshare Wiki
Jump to: navigation, search
(How to use)
(How to use)
 
Line 27: Line 27:
 
hdmi_mode=87
 
hdmi_mode=87
 
hdmi_timings=1080 0 112 16 160 1920 0 4 10 10 0 0 0 60 0 140000000 3
 
hdmi_timings=1080 0 112 16 160 1920 0 4 10 10 0 0 0 60 0 140000000 3
 
+
extra_transpose_buffer=2
 +
gpu_mem=512
 
</source>
 
</source>
 
: 5) Save and eject the card.
 
: 5) Save and eject the card.

Latest revision as of 06:15, 4 August 2020

How to use

1. This LCD supports Windows 7/8/8.1/10 when working with PC via HDMI interface

1) Connect the Touch interface of LCD to the USB port of PC by USB cable. The touch function is enabled after that.
2) Connect the HDMI interface of LCD to the HDMI interface of PC by HDMI cable. LCD displays normally after a few seconds. The sound can output through the speaker by default, and also can output by connecting to 3.5mm earphones through HP audio output port.

Note:

1) If you connect multiple screens to your PC, please set this LCD as the main display for properly touching
2) If the USB port of PC cannot supply much voltage for the LCD, you can connect external 5V power supply to the Power interface of LCD.
3) We recommend you to set the icons bigger for better displaying.


2. When working with Raspberry Pi, this LCD supports Raspbian/Ubuntu mate/Kali/Retropie/Windows 10 IoT Core
When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section.
Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.
2) Connect the TF card to the PC, use SDFormatter.exe software to format the TF card.
3) Open the Win32DiskImager.exe software, select the system image downloaded in step 1, and click‘Write’ to write the system image.
4) After the image has finished writing, open the config.txt file in the root directory of the TF card, add the following code at the end of config.txt, then save and quit the TF card safely.
max_framebuffer_height=1920
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=1080 0 112 16 160 1920 0 4 10 10 0 0 0 60 0 140000000 3
extra_transpose_buffer=2
gpu_mem=512
5) Save and eject the card.
6)Connect the Touch interface of the LCD to the USB port of Raspberry Pi.
7) Connect the HDMI interface of the LCD to the HDMI port of Raspberry Pi and then power on the Raspberry Pi, it can display normally after waiting for about ten seconds.

Note: If you are using Pi4 or a higher version of Raspberry Pi, the HDMI interface of the LCD needs to be connected to the HDMI0 port of the Raspberry Pi (near the power port).

Setting orientation

Display orientation

If you are using Pi4, you can rotate in the following ways:

  • 1. Open Screen Configuration。

5.5inch-HDMI-AMOLED-Manual-11.jpg

  • 2. Rotate display as figure

5.5inch-HDMI-AMOLED-Manual-12.jpg

5.5inch-HDMI-AMOLED-Manual-13.jpg

5.5inch-HDMI-AMOLED-Manual-14.jpg

  • 3. The LCD will work normally after you rotate the touch as well.


If you are using Pi 3+/Pi 3 or older versions, use the following method to rotate:

  • 1. Add the following line to config.txt file which is located in BOOT directory.
display_rotate=1 #1:90;2: 180; 3: 270
  • 2. Save and reboot Raspberry Pi
sudo reboot
  • 3.Touch orientation

The Touch of the LCD cannot be changed along with the display, in this case, you should rotate the touch manually after changing the display orientation. With this display, you can rotate the touch by using a card needle or tweezer and pressing the following button.(To avoid from unintended touching, we hide the Rotate Touch button in the case)

7inch-FHD-Monitor-Manual-20.jpg

Note: The touch orientation may be wrong with a new OS, you can fix it by pressing the Rotate Touch button.

GUI improving

For better display and touching, you can modify the theme setting. Set the icons and text bigger. Here we take Raspbian as examples.

  • Select Menu-》Preferences-》Appearance Settings-》Defaults-》For large screens:Set Defaults-》OK。

7inch-FHD-Monitor-Manual-03.jpg7inch-FHD-Monitor-Manual-04.jpg

  • Mosify the font size of System

7inch-FHD-Monitor-Manual-05.jpg

  • Right-click the taskbar and select-》Panel Settings -》Set the size of Geometry.

7inch-FHD-Monitor-Manual-01.jpg 7inch-FHD-Monitor-Manual-02.jpg

Keys

  • ON/OFF:Signle press to turn on/off display, Long-press to adjust the brightness.
  • Rotate Touch: Adjust the orientation of touch. To avoid unintended touching, the button is hidden in the case.

Others

Disable power saving.

If you want to keep the display turning on all the time, you can disable the power saving function.
Modify file lightdm.conf

sudo nano /etc/lightdm/lightdm.conf

Find the [SeatDefaults] option and uncomment the line"xserver-command", modify it as below:

#xserver-command=X

Modify this code to

xserver-command=X -s 0 -dpms
  • -s # –Disable the display protecting.
  • dpms Disable power saving.

Reboot

sudo reboot

Turn on/off HDMI output

You can use the following commands to disable/enable the displaying.

vcgencmd display_power 0
vcgencmd display_power 1