Template: 6inch e-Paper user manual
From Waveshare Wiki
Revision as of 02:00, 30 July 2019 by Waveshare-eng11 (talk | contribs) (→Working with Raspberry Pi)
Working with Raspberry Pi
- Hardware connection
- You should add the IT8951 Driver HAT on Raspberry Pi, communicating via SPI interface.
- You can also connecting by wires
IT8951 Driver HAT | Raspberry Pi (BCM) | Description' |
5V | 5V | 5V power input |
GND | GND | Ground |
MISO | P9 | MISO Pin of SPI |
MOSI | P10 | MOSI Pin of SPI |
SCK | P11 | SCK Pin of SPI |
CS | P8 | Chip selection of SPI (Low active) |
RST | P17 | Reset pin (Low active) |
HRDY | P24 | Busy stats pin (Low when busy) |