Search results

Jump to: navigation, search

Page title matches

  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-blaster.htm}}]] |website_cn=[https://www.waveshare.net/shop/USB-Blaster.htm 官网]
    2 KB (208 words) - 01:30, 8 October 2022
  • ...right|300px |alt=USB-AVRISP|link=http://www.waveshare.com/USB-AVRISP.htm | USB AVRISP]] ...In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB
    1 KB (211 words) - 10:36, 6 June 2022
  • ...=SL811-USB-Board|link=http://www.waveshare.com/SL811-USB-Board.htm | SL811 USB Board]] |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    897 bytes (115 words) - 11:03, 6 June 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-blaster-v2.htm}}]] |website_cn=[https://www.waveshare.net/shop/USB-Blaster-V2.htm 官网]
    2 KB (203 words) - 06:51, 8 October 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-avrisp-ch.htm}}]] |website_en=[https://www.waveshare.com/usb-avrisp-ch.htm Website]
    4 KB (687 words) - 09:24, 15 August 2022
  • ...300px |alt=USB-AVRISP-PL|link=http://www.waveshare.com/USB-AVRISP-PL.htm | USB AVRISP PL]] ...In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB
    1 KB (227 words) - 10:11, 6 June 2022
  • ...-USB|link=http://www.waveshare.com/Platform-Cable-USB.htm | Platform-Cable-USB]] *[http://www.waveshare.com/Platform-Cable-USB.htm Introduction]
    1 KB (149 words) - 03:40, 2 August 2022
  • ...SB-C8051F-Debugger|link=http://www.waveshare.com/USB-C8051F-Debugger.htm | USB C8051F Debugger]] Debugger and programmer for C8051Fxxx MCUs, USB connection to the PC, JTAG and C2 debug interfaces to the target board
    658 bytes (94 words) - 10:24, 6 June 2022
  • |name=XBee USB Adapter ...lget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/product/XBee-USB-Adapter.htm}}]]
    1 KB (122 words) - 10:45, 6 June 2022
  • ...zon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/usb-hub-hat.htm}}]] |brief=4 Port USB HUB HAT for Raspberry Pi Zero / Zero W
    3 KB (491 words) - 09:56, 15 August 2022
  • *[[USB AVR JTAGICE XPII]] *[[USB AVRISP CH]]
    183 bytes (29 words) - 10:47, 22 October 2019
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-avrisp-ch.htm}}]] |website_en=[https://www.waveshare.com/usb-avrisp-ch.htm Website]
    4 KB (571 words) - 09:26, 15 August 2022
  • ...|}}|url=link=https://www.waveshare.com/pi-zero-usb-adapter.htm}} | Pi Zero USB Adapter]] |caption=USB-micro to USB-A Adapter for Raspberry Pi Zero/Zero W/Zero WH
    1 KB (199 words) - 07:49, 19 July 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs485.htm}} ]] |caption=USB TO RS485
    3 KB (486 words) - 10:12, 15 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl.htm}} | USB to TTL]] |caption=USB TO UART solution with USB Type A connector
    1 KB (143 words) - 10:19, 15 August 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-audio.htm}}]] This is a USB sound card, supports recording and playback, stereo codec, built-in microph
    3 KB (495 words) - 10:07, 15 August 2022
  • ...on|0}}| default|}}|url=link=https://www.waveshare.com/usb-hub-4u.htm}}|alt=USB-HUB-4U]] |interface1=USB
    869 bytes (130 words) - 10:49, 18 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-sata.htm}}| USB TO SATA]] |caption=USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C
    2 KB (221 words) - 02:38, 2 September 2022
  • #redirect[[USB HUB HAT (B)]]
    28 bytes (5 words) - 09:45, 26 April 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/USB-HUB-7U.htm}}]] |caption=USB
    870 bytes (130 words) - 08:07, 23 August 2022
  • ...Amazon|0}}| default|}}|url=link=http://www.waveshare.com/USB-CAN-B.htm}} | USB-CAN-B]] |caption= USB To CAN Converter
    14 KB (1,893 words) - 03:56, 18 November 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-can-a.htm}}]] |caption=USB To CAN<br/>CAN
    757 bytes (101 words) - 06:54, 15 November 2022
  • ...|}}|url=link=http://www.waveshare.com/USB3300-USB-HS-Board.htm}} | USB3300-USB-HS-Board]] |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    1 KB (124 words) - 10:36, 6 June 2022
  • ...i|link=http://www.waveshare.com/CY7C68013A-USB-BOARD-mini.htm | CY7C68013A USB Board (mini)]] |caption=High speed USB module with embedded 8051 core, USB mini-AB connector
    1 KB (148 words) - 08:42, 6 June 2022
  • 241 bytes (31 words) - 06:16, 14 April 2015
  • *[[:File:EZ-USB-Devtools.7z|EZ USB devtools]]
    232 bytes (29 words) - 06:55, 23 November 2020
  • ...-AVR-JTAGICE-XPII|link=http://www.waveshare.com/USB-AVR-JTAGICE-XPII.htm | USB AVR JTAGICE XPII]] |More = [http://www.waveshare.com/USB-AVR-JTAGICE-XPII.htm More]}}
    2 KB (373 words) - 10:14, 6 June 2022
  • |name=[[ETH/USB HUB HAT]] |name2=[[ETH-USB-HUB-BOX]]
    2 KB (398 words) - 02:22, 16 July 2022
  • ...=link=https://www.waveshare.com/ov5640-5mp-usb-camera-b.htm}} | OV5640 5MP USB Camera (B)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (208 words) - 03:57, 19 July 2022
  • |name=USB HUB HAT (B) |name2=USB-HUB-BOX
    3 KB (513 words) - 02:15, 2 September 2022
  • ...}}| default|}}|url=link=https://www.waveshare.com/usb-hub-2in-4out.htm}} | USB-HUB-2IN-4OUT]] |caption=Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts
    2 KB (329 words) - 10:36, 18 August 2022
  • {{DISPLAYTITLE:CH343 USB UART Board}} ...ult|}}|url=link=https://www.waveshare.com/ch343-usb-uart-board.htm}}|CH343 USB UART Board]]
    6 KB (857 words) - 07:52, 10 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl-b.htm}}|USB TO TTL (B)]] |caption=USB TO UART solution with USB Type A connector
    6 KB (858 words) - 10:47, 18 August 2022
  • {{DISPLAYTITLE:USB TO 4CH TLL}} ...on|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-4ch-ttl.htm}}|USB TO 4CH TTL]]
    4 KB (561 words) - 10:00, 15 August 2022
  • #redirect[[ETH/USB HUB HAT (B)]]
    32 bytes (6 words) - 09:45, 26 April 2022
  • |img=[[File:USB-TO-RS485-B.jpg|300px|USB TO RS485|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Am |caption=USB TO RS485
    3 KB (548 words) - 06:21, 5 August 2022
  • |name=USB-HUB-ETH ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/USB-HUB-3U-ETH.htm}}]]
    1 KB (202 words) - 08:04, 23 August 2022
  • ...link=http://www.waveshare.com/CY7C68013A-USB-BOARD-type-A.htm | CY7C68013A USB Board (type A)]] |caption=High speed USB module with embedded 8051 core, USB type A connector
    1 KB (139 words) - 09:23, 6 June 2022
  • ...d-mini|link=http://www.waveshare.com/FT245-USB-FIFO-Board-mini.htm | FT245 USB FIFO Board (mini)]] |caption=USB to parallel FIFO interface with USB mini-AB connector
    1 KB (143 words) - 08:20, 6 June 2022
  • ...|url=link=http://www.waveshare.com/FT232-USB-UART-Board-mini.htm}} | FT232 USB UART Board (mini)]] |caption=USB TO UART solution with USB mini connector
    1 KB (152 words) - 02:53, 16 July 2022
  • ...rl=link=http://www.waveshare.com/CP2102-USB-UART-Board-mini.htm}} | CP2102 USB UART Board (mini)]] |caption=CP2102 USB to UART Module, USB mini connector
    1 KB (136 words) - 10:03, 14 July 2022
  • ...rl=link=http://www.waveshare.com/PL2303-USB-UART-Board-mini.htm}} | PL2303 USB UART Board (mini)]] |caption=USB TO UART solution with USB mini-AB connector
    1 KB (137 words) - 03:33, 2 August 2022
  • 105 bytes (13 words) - 06:19, 14 April 2015
  • 89 bytes (12 words) - 06:18, 14 April 2015
  • ...url=link=http://www.waveshare.com/FT232-USB-UART-Board-micro.htm}} | FT232 USB UART Board (micro)]] |caption=USB TO UART solution with USB micro connector
    1 KB (145 words) - 10:39, 2 September 2022
  • [[Category:Modules]][[Category:USB| ]] ...l=link=http://www.waveshare.com/CP2102-USB-UART-Board-micro.htm}} | CP2102 USB UART Board (micro)]]
    1 KB (139 words) - 10:01, 14 July 2022
  • ...l=link=http://www.waveshare.com/PL2303-USB-UART-Board-micro.htm}} | PL2303 USB UART Board (micro)]] |caption=USB TO UART solution with USB micro connector
    1 KB (138 words) - 03:32, 2 August 2022
  • ...=link=https://www.waveshare.com/imx179-8mp-usb-camera-a.htm}} | IMX179 8MP USB Camera (A)]] |caption=USB Camere, 8 megapixel. UVC protocol
    2 KB (252 words) - 06:13, 16 July 2022
  • ...=link=https://www.waveshare.com/ov2710-2mp-usb-camera-a.htm}} | OV2710 2MP USB Camera (A)]] |caption=USB Camere, 2 megapixel. UVC protocol
    2 KB (217 words) - 03:55, 19 July 2022
  • ...=link=https://www.waveshare.com/ov5648-5mp-usb-camera-a.htm}} | OV5648 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (237 words) - 01:53, 17 May 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs232-485-ttl.htm}}]] |caption=USB to RS232/485/TTL Interface Converter, Industrial Isolation
    2 KB (294 words) - 10:08, 15 August 2022
  • ...=link=https://www.waveshare.com/ov5640-5mp-usb-camera-a.htm}} | OV5640 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (208 words) - 03:53, 20 July 2022
  • ...=link=https://www.waveshare.com/imx335-5mp-usb-camera-a.htm}} | IMX335 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (256 words) - 07:09, 16 July 2022
  • |name=USB 3.2 Gen1 HUB HAT ...| default|}}|url=link=https://www.waveshare.com/usb-3.2-gen1-hub-hat.htm}}|USB 3.2 Gen1 HUB HAT]]
    5 KB (827 words) - 03:09, 2 September 2022
  • |name = PoE/ETH/USB HUB HAT |name2 = PoE/ETH/USB HUB BOX
    3 KB (527 words) - 10:59, 21 September 2022
  • |name=ETH/USB HUB HAT (B) |name2=[[ETH-USB-HUB-BOX]]
    3 KB (400 words) - 02:25, 16 July 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[PoE/ETH/USB HUB HAT]]
    32 bytes (6 words) - 09:46, 26 April 2022
  • |name=PL2303 USB UART Board V2 |name2=PL2303 USB UART Board (Type C)
    2 KB (253 words) - 03:39, 2 August 2022
  • 33 bytes (5 words) - 09:01, 25 May 2022
  • 31 bytes (3 words) - 10:55, 14 October 2022
  • |img=[[File:USB TO M.2 B KEY.jpg|300px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0} |website_cn=[https://www.waveshare.net/shop/USB-TO-M.2-B-KEY.htm 官网]
    3 KB (435 words) - 03:33, 3 November 2022
  • ...pe-A|link=http://www.waveshare.com/FT245-USB-FIFO-Board-type-A.htm | FT245 USB FIFO Board (type A)]] |caption=USB to parallel FIFO interface with USB Type A connector
    1 KB (134 words) - 08:17, 6 June 2022
  • {{DISPLAYTITLE:FT232 USB UART Board}} ...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/ft232-usb-uart-board-micro.htm}}]]</div></div>
    2 KB (262 words) - 03:13, 16 July 2022
  • {{DISPLAYTITLE:CP2102 USB UART Board}} |name=CP2102 USB UART Board
    2 KB (244 words) - 10:04, 14 July 2022
  • [[Category:Modules]][[Category:USB| ]] {{DISPLAYTITLE:PL2303 USB UART Board}}
    2 KB (254 words) - 03:35, 2 August 2022
  • ...s a USB to parallel FIFO interface, with FT245 chip onboard, also features USB mini-AB connector, and control interface (8 data pins & 6 control pins). The FT245 USB FIFO Board (mini) is ideal for establishing communication between MCU and P
    3 KB (507 words) - 03:32, 4 June 2015
  • ...s://www.waveshare.com/imx258-13mp-ois-usb-camera-a.htm}} | IMX258 13MP OIS USB Camera (A)]] |caption=USB Camere, 13 megapixel. UVC protocol
    2 KB (205 words) - 07:02, 16 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl.htm}} | USB to TTL]] |caption=USB TO UART solution with USB Type A connector
    1 KB (149 words) - 08:41, 10 August 2022
  • ...}}|url=link=https://www.waveshare.com/pcie-to-usb-3.2-gen1-b.htm}}|PCIe TO USB 3.2 Gen1 (B)]] |caption=PCIe TO USB 3.2 Gen1 Adapter
    2 KB (234 words) - 08:41, 3 August 2022
  • #redirect[[FT232 USB UART Board (Type A)]]
    42 bytes (7 words) - 08:01, 9 August 2021
  • #redirect[[CP2102 USB UART Board (type A)]]
    43 bytes (7 words) - 08:03, 9 August 2021
  • #redirect[[PL2303 USB UART Board (type A)]]
    43 bytes (7 words) - 08:04, 9 August 2021
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • |name=diting USB 3.2 Gen1 TO Gigabit ETH ...rl=link=https://www.waveshare.com/USB-3.2-Gen1-TO-Gigabit-ETH.htm}}|diting USB 3.2 Gen1 TO Gigabit ETH]]
    914 bytes (112 words) - 09:09, 15 August 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • 43 bytes (7 words) - 07:12, 26 April 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs232-485-ttl.htm}}]] |caption=FT232 USB To RS232/RS485/TTL<br/>RS232/RS485/UART
    2 KB (283 words) - 07:09, 30 August 2022
  • |name=USB 3.2 Gen1 HUB Gigabit ETH HAT ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-3.2-gen1-hub-gigabit-eth-hat.htm}}|WSTP11A]]
    2 KB (237 words) - 08:03, 29 October 2022
  • [[Category:Modules]][[Category:USB| ]] ...k=https://www.waveshare.com/pl2303-usb-uart-board-type-a-v2.htm}} | PL2303 USB UART Board (type A) V2]]</div></div>
    2 KB (241 words) - 03:38, 2 August 2022
  • *U disk with USB interface or mobile hard disk (USB3,0 is recommended) *a USB data cable (Micro USB interface, for transmitting data)
    2 KB (415 words) - 07:56, 13 July 2022

Page text matches

  • ...l=link=http://www.waveshare.com/PL2303-USB-UART-Board-micro.htm}} | PL2303 USB UART Board (micro)]] |caption=USB TO UART solution with USB micro connector
    1 KB (138 words) - 03:32, 2 August 2022
  • [[Category:Modules]][[Category:USB| ]] ...l=link=http://www.waveshare.com/CP2102-USB-UART-Board-micro.htm}} | CP2102 USB UART Board (micro)]]
    1 KB (139 words) - 10:01, 14 July 2022
  • ...i|link=http://www.waveshare.com/CY7C68013A-USB-BOARD-mini.htm | CY7C68013A USB Board (mini)]] |caption=High speed USB module with embedded 8051 core, USB mini-AB connector
    1 KB (148 words) - 08:42, 6 June 2022
  • ...rl=link=http://www.waveshare.com/CP2102-USB-UART-Board-mini.htm}} | CP2102 USB UART Board (mini)]] |caption=CP2102 USB to UART Module, USB mini connector
    1 KB (136 words) - 10:03, 14 July 2022
  • ...rl=link=http://www.waveshare.com/PL2303-USB-UART-Board-mini.htm}} | PL2303 USB UART Board (mini)]] |caption=USB TO UART solution with USB mini-AB connector
    1 KB (137 words) - 03:33, 2 August 2022
  • ...|url=link=http://www.waveshare.com/FT232-USB-UART-Board-mini.htm}} | FT232 USB UART Board (mini)]] |caption=USB TO UART solution with USB mini connector
    1 KB (152 words) - 02:53, 16 July 2022
  • ...on|0}}| default|}}|url=link=https://www.waveshare.com/usb-hub-4u.htm}}|alt=USB-HUB-4U]] |interface1=USB
    869 bytes (130 words) - 10:49, 18 August 2022
  • ...link=http://www.waveshare.com/CY7C68013A-USB-BOARD-type-A.htm | CY7C68013A USB Board (type A)]] |caption=High speed USB module with embedded 8051 core, USB type A connector
    1 KB (139 words) - 09:23, 6 June 2022
  • ...url=link=http://www.waveshare.com/FT232-USB-UART-Board-micro.htm}} | FT232 USB UART Board (micro)]] |caption=USB TO UART solution with USB micro connector
    1 KB (145 words) - 10:39, 2 September 2022
  • ...=SL811-USB-Board|link=http://www.waveshare.com/SL811-USB-Board.htm | SL811 USB Board]] |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    897 bytes (115 words) - 11:03, 6 June 2022
  • *[[USB AVR JTAGICE XPII]] *[[USB AVRISP CH]]
    183 bytes (29 words) - 10:47, 22 October 2019
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-can-a.htm}}]] |caption=USB To CAN<br/>CAN
    757 bytes (101 words) - 06:54, 15 November 2022
  • ...|}}|url=link=http://www.waveshare.com/USB3300-USB-HS-Board.htm}} | USB3300-USB-HS-Board]] |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    1 KB (124 words) - 10:36, 6 June 2022
  • == USB Driver == *[[:File:PL2303_Windows_Driver.7z|USB to TTL Driver]]
    471 bytes (61 words) - 07:16, 25 July 2015
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl.htm}} | USB to TTL]] |caption=USB TO UART solution with USB Type A connector
    1 KB (143 words) - 10:19, 15 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl.htm}} | USB to TTL]] |caption=USB TO UART solution with USB Type A connector
    1 KB (149 words) - 08:41, 10 August 2022
  • ...d-mini|link=http://www.waveshare.com/FT245-USB-FIFO-Board-mini.htm | FT245 USB FIFO Board (mini)]] |caption=USB to parallel FIFO interface with USB mini-AB connector
    1 KB (143 words) - 08:20, 6 June 2022
  • [[Category:Modules]][[Category:USB| ]] {{DISPLAYTITLE:PL2303 USB UART Board}}
    2 KB (254 words) - 03:35, 2 August 2022
  • {{DISPLAYTITLE:CP2102 USB UART Board}} |name=CP2102 USB UART Board
    2 KB (244 words) - 10:04, 14 July 2022
  • ...pe-A|link=http://www.waveshare.com/FT245-USB-FIFO-Board-type-A.htm | FT245 USB FIFO Board (type A)]] |caption=USB to parallel FIFO interface with USB Type A connector
    1 KB (134 words) - 08:17, 6 June 2022
  • {{DISPLAYTITLE:FT232 USB UART Board}} ...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/ft232-usb-uart-board-micro.htm}}]]</div></div>
    2 KB (262 words) - 03:13, 16 July 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/USB-HUB-7U.htm}}]] |caption=USB
    870 bytes (130 words) - 08:07, 23 August 2022
  • |name=diting USB 3.2 Gen1 TO Gigabit ETH ...rl=link=https://www.waveshare.com/USB-3.2-Gen1-TO-Gigabit-ETH.htm}}|diting USB 3.2 Gen1 TO Gigabit ETH]]
    914 bytes (112 words) - 09:09, 15 August 2022
  • *[[USB WIFI BL-150UM RTL8188]] *[[USB Camera 0307]]
    122 bytes (16 words) - 03:47, 17 March 2015
  • *[[USB WIFI BL-150UM RTL8188]] *[[USB Camera 0307]]
    119 bytes (16 words) - 06:12, 17 March 2015
  • |name=USB-HUB-ETH ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/USB-HUB-3U-ETH.htm}}]]
    1 KB (202 words) - 08:04, 23 August 2022
  • ...SB-C8051F-Debugger|link=http://www.waveshare.com/USB-C8051F-Debugger.htm | USB C8051F Debugger]] Debugger and programmer for C8051Fxxx MCUs, USB connection to the PC, JTAG and C2 debug interfaces to the target board
    658 bytes (94 words) - 10:24, 6 June 2022
  • ...right|300px |alt=USB-AVRISP|link=http://www.waveshare.com/USB-AVRISP.htm | USB AVRISP]] ...In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB
    1 KB (211 words) - 10:36, 6 June 2022
  • *[[USB WIFI BL-150UM RTL8188]] *[[USB Camera OV7670]]
    339 bytes (50 words) - 02:34, 22 April 2015
  • *[[USB WIFI BL-150UM RTL8188]] *[[USB Camera OV7670]]
    335 bytes (50 words) - 02:33, 22 April 2015
  • *[[USB WIFI BL-150UM RTL8188]] *[[USB Camera OV7670]]
    338 bytes (50 words) - 02:35, 22 April 2015
  • ...300px |alt=USB-AVRISP-PL|link=http://www.waveshare.com/USB-AVRISP-PL.htm | USB AVRISP PL]] ...In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB
    1 KB (227 words) - 10:11, 6 June 2022
  • [[Category:Modules]][[Category:USB| ]] ...k=https://www.waveshare.com/pl2303-usb-uart-board-type-a-v2.htm}} | PL2303 USB UART Board (type A) V2]]</div></div>
    2 KB (241 words) - 03:38, 2 August 2022
  • |name=USB 3.2 Gen1 HUB Gigabit ETH HAT ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-3.2-gen1-hub-gigabit-eth-hat.htm}}|WSTP11A]]
    2 KB (237 words) - 08:03, 29 October 2022
  • *[[:File:EZ-USB-Devtools.7z|EZ USB devtools]]
    232 bytes (29 words) - 06:55, 23 November 2020
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-sata.htm}}| USB TO SATA]] |caption=USB-C Adapter For NGFF SSD, USB3.2 Gen2 Type-C
    2 KB (221 words) - 02:38, 2 September 2022
  • ...-USB|link=http://www.waveshare.com/Platform-Cable-USB.htm | Platform-Cable-USB]] *[http://www.waveshare.com/Platform-Cable-USB.htm Introduction]
    1 KB (149 words) - 03:40, 2 August 2022
  • |name=[[ETH/USB HUB HAT]] |name2=[[ETH-USB-HUB-BOX]]
    2 KB (398 words) - 02:22, 16 July 2022
  • ...=link=https://www.waveshare.com/ov5640-5mp-usb-camera-b.htm}} | OV5640 5MP USB Camera (B)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (208 words) - 03:57, 19 July 2022
  • ...=link=https://www.waveshare.com/ov5640-5mp-usb-camera-a.htm}} | OV5640 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (208 words) - 03:53, 20 July 2022
  • ...=link=https://www.waveshare.com/ov2710-2mp-usb-camera-a.htm}} | OV2710 2MP USB Camera (A)]] |caption=USB Camere, 2 megapixel. UVC protocol
    2 KB (217 words) - 03:55, 19 July 2022
  • ...s://www.waveshare.com/imx258-13mp-ois-usb-camera-a.htm}} | IMX258 13MP OIS USB Camera (A)]] |caption=USB Camere, 13 megapixel. UVC protocol
    2 KB (205 words) - 07:02, 16 August 2022
  • ...|}}|url=link=https://www.waveshare.com/pi-zero-usb-adapter.htm}} | Pi Zero USB Adapter]] |caption=USB-micro to USB-A Adapter for Raspberry Pi Zero/Zero W/Zero WH
    1 KB (199 words) - 07:49, 19 July 2022
  • |caption=CP2102 Evaluation Development Board, USB, RS232, DB9 Connector |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    944 bytes (114 words) - 08:45, 6 June 2022
  • |name=ETH/USB HUB HAT (B) |name2=[[ETH-USB-HUB-BOX]]
    3 KB (400 words) - 02:25, 16 July 2022
  • ...zon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/usb-hub-hat.htm}}]] |brief=4 Port USB HUB HAT for Raspberry Pi Zero / Zero W
    3 KB (491 words) - 09:56, 15 August 2022
  • ...=link=https://www.waveshare.com/imx179-8mp-usb-camera-a.htm}} | IMX179 8MP USB Camera (A)]] |caption=USB Camere, 8 megapixel. UVC protocol
    2 KB (252 words) - 06:13, 16 July 2022
  • |name=XBee USB Adapter ...lget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/product/XBee-USB-Adapter.htm}}]]
    1 KB (122 words) - 10:45, 6 June 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-blaster.htm}}]] |website_cn=[https://www.waveshare.net/shop/USB-Blaster.htm 官网]
    2 KB (208 words) - 01:30, 8 October 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs232-485-ttl.htm}}]] |caption=USB to RS232/485/TTL Interface Converter, Industrial Isolation
    2 KB (294 words) - 10:08, 15 August 2022
  • *[[:File:PL2303_Windows_Driver.7z|USB to TTL Driver]] *[[:File:St-link_v2_usbdriver.zip|ST Link V2 USB Driver]]
    395 bytes (62 words) - 03:45, 14 May 2015
  • ...=link=https://www.waveshare.com/imx335-5mp-usb-camera-a.htm}} | IMX335 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (256 words) - 07:09, 16 July 2022
  • ...}}| default|}}|url=link=https://www.waveshare.com/usb-hub-2in-4out.htm}} | USB-HUB-2IN-4OUT]] |caption=Industrial Grade USB HUB, Extending 4x USB 2.0 Ports, Switchable Dual Hosts
    2 KB (329 words) - 10:36, 18 August 2022
  • *[[:File:USB-VC.7z|USB-VC.7z]] *[[:File:EZ-USB.7z|EZ-USB.exe]]
    545 bytes (78 words) - 02:12, 5 November 2019
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-blaster-v2.htm}}]] |website_cn=[https://www.waveshare.net/shop/USB-Blaster-V2.htm 官网]
    2 KB (203 words) - 06:51, 8 October 2022
  • |caption=STM32 MCU core board, STM32F407IGT6, IO expander, USB HS/FS, Ethernet, NandFlash |interface2 = USB
    1 KB (189 words) - 10:51, 6 June 2022
  • ...ation Board Based on FT232, A High-performance Cost-effective Solution for USB TO UART |category=[[:Category:Modules|Modules]], [[:Category:USB|USB]]
    993 bytes (124 words) - 08:18, 6 June 2022
  • ...=link=https://www.waveshare.com/ov5648-5mp-usb-camera-a.htm}} | OV5648 5MP USB Camera (A)]] |caption=USB Camere, 5 megapixel. UVC protocol
    2 KB (237 words) - 01:53, 17 May 2022
  • ...}}|url=link=https://www.waveshare.com/pcie-to-usb-3.2-gen1-b.htm}}|PCIe TO USB 3.2 Gen1 (B)]] |caption=PCIe TO USB 3.2 Gen1 Adapter
    2 KB (234 words) - 08:41, 3 August 2022
  • |name=USB HUB HAT (B) |name2=USB-HUB-BOX
    3 KB (513 words) - 02:15, 2 September 2022
  • |name = PoE/ETH/USB HUB HAT |name2 = PoE/ETH/USB HUB BOX
    3 KB (527 words) - 10:59, 21 September 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[CH343 USB UART Board]]
    33 bytes (5 words) - 07:11, 26 April 2022
  • #redirect[[USB HUB HAT (B)]]
    28 bytes (5 words) - 09:45, 26 April 2022
  • #redirect[[ETH/USB HUB HAT (B)]]
    32 bytes (6 words) - 09:45, 26 April 2022
  • #redirect[[PoE/ETH/USB HUB HAT]]
    32 bytes (6 words) - 09:46, 26 April 2022
  • |caption=Barcode Scanner Module,USB/UART interface |interface1 = USB
    1 KB (140 words) - 08:42, 1 September 2022
  • #redirect[[FT232 USB UART Board (Type A)]]
    42 bytes (7 words) - 08:01, 9 August 2021
  • #redirect[[CP2102 USB UART Board (type A)]]
    43 bytes (7 words) - 08:03, 9 August 2021
  • #redirect[[PL2303 USB UART Board (type A)]]
    43 bytes (7 words) - 08:04, 9 August 2021
  • ...pment board, STM32F407IGT6, USB HS/FS, Ethernet, NandFlash, JTAG/SWD, LCD, USB TO UART |interface3 = USB TO UART
    2 KB (231 words) - 10:12, 9 October 2022
  • Solar panel, Power adapter, USB USB charge interface
    2 KB (287 words) - 08:03, 8 August 2022
  • {{DISPLAYTITLE:USB/RS232/RS485/TTL Converter}} |caption=Industrial Isolated Multi-Bus Converter, USB / RS232 / RS485 / TTL Communication
    3 KB (385 words) - 09:04, 17 September 2022
  • |name=PL2303 USB UART Board V2 |name2=PL2303 USB UART Board (Type C)
    2 KB (253 words) - 03:39, 2 August 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs232-485-ttl.htm}}]] |caption=FT232 USB To RS232/RS485/TTL<br/>RS232/RS485/UART
    2 KB (283 words) - 07:09, 30 August 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-audio.htm}}]] This is a USB sound card, supports recording and playback, stereo codec, built-in microph
    3 KB (495 words) - 10:07, 15 August 2022
  • ...s a USB to parallel FIFO interface, with FT245 chip onboard, also features USB mini-AB connector, and control interface (8 data pins & 6 control pins). The FT245 USB FIFO Board (mini) is ideal for establishing communication between MCU and P
    3 KB (507 words) - 03:32, 4 June 2015
  • |img=[[File:XBee-USB-Adapter-5.jpg|300px|alt=CC2530-Eval-Kit5|{{Amazon_nolink|default={{#ifeq: { * [[XBee USB Adapter]]
    1 KB (152 words) - 08:30, 6 June 2022
  • Onboard 4-ch USB Interface, Fast Ethernet Port and HDMI Port, Raspberry Pi Zero To 3B Adapte *Onboard 4-ch USB expansion port, it is compatible with USB 2.0 / 1.1 transmission.
    3 KB (371 words) - 07:43, 30 August 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-avrisp-ch.htm}}]] |website_en=[https://www.waveshare.com/usb-avrisp-ch.htm Website]
    4 KB (571 words) - 09:26, 15 August 2022
  • {{DISPLAYTITLE:USB TO 4CH TLL}} ...on|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-4ch-ttl.htm}}|USB TO 4CH TTL]]
    4 KB (561 words) - 10:00, 15 August 2022
  • *You can use the micro USB to directly power the power supply USB port of the Raspberry Pi. |USB Type-C Interface ||Battery Charge/Power Out
    4 KB (615 words) - 01:41, 11 August 2022
  • |name=USB 3.2 Gen1 HUB HAT ...| default|}}|url=link=https://www.waveshare.com/usb-3.2-gen1-hub-hat.htm}}|USB 3.2 Gen1 HUB HAT]]
    5 KB (827 words) - 03:09, 2 September 2022
  • ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR |interface10 = USB TO UART
    2 KB (200 words) - 08:14, 6 June 2022
  • |img=[[File:USB TO M.2 B KEY.jpg|300px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0} |website_cn=[https://www.waveshare.net/shop/USB-TO-M.2-B-KEY.htm 官网]
    3 KB (435 words) - 03:33, 3 November 2022
  • |img=[[File:USB-TO-RS485-B.jpg|300px|USB TO RS485|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Am |caption=USB TO RS485
    3 KB (548 words) - 06:21, 5 August 2022
  • # 5V USB battery charging port # FE1.1S: USB HUB chip
    3 KB (411 words) - 07:43, 10 August 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-avrisp-ch.htm}}]] |website_en=[https://www.waveshare.com/usb-avrisp-ch.htm Website]
    4 KB (687 words) - 09:24, 15 August 2022
  • *[[USB HUB HAT]] *Micro-USB power
    4 KB (575 words) - 10:13, 6 June 2022
  • This is a USB sound card, supports recording and playback, stereo codec, built-in microph *USB connector, suits Jetson Nano Developer Kit series, multi-systems compatible
    2 KB (236 words) - 08:12, 30 July 2022
  • ...on|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-rs485.htm}} ]] |caption=USB TO RS485
    3 KB (486 words) - 10:12, 15 August 2022
  • |interface2=USB {{FAQ|Can the Raspberry Pi be powered directly by the USB Type-A port of the module?
    2 KB (295 words) - 09:04, 1 September 2022
  • *Connect the SIM card and antenna to DTU, and connect the USB interface of the DTU to the computer, power on the DTU. *Install the USB driver(refer to [[#Install Driver]])
    2 KB (311 words) - 08:56, 12 November 2022
  • |interface=USB 2. Replace the USB cable to see if there is a problem with the USB cable used.<br/>
    2 KB (267 words) - 05:56, 11 August 2022
  • ...ation Board Based on FT245, A High-performance Cost-effective Solution for USB TO 8-BIT FIFO ...ation Board Based on FT245, A High-performance Cost-effective Solution for USB TO 8-BIT FIFO
    1 KB (129 words) - 08:21, 6 June 2022
  • Supports RNDIS Dial-Up via the USB port on Windows/Linux(including Raspberry Pi) *Connect the SIM card and antenna to DTU, and connect the USB interface of the DTU to the computer, power on the DTU.
    2 KB (366 words) - 12:19, 20 June 2022
  • Supports RNDIS Dial-Up via the USB port on Windows/Linux(including Raspberry Pi) *Connect the SIM card and antenna to DTU, and connect the USB interface of the DTU to the computer, power on the DTU.
    2 KB (366 words) - 07:31, 12 August 2022
  • ==== USB Driver ==== *[[:File:ST-Link_V2_USBDriver.zip|ST-Link V2 USB Driver]]
    3 KB (462 words) - 11:24, 6 June 2022
  • ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR
    1 KB (150 words) - 08:14, 6 June 2022
  • |caption=RP2040<br/>Micro USB 2. Replace the USB cable to see if there is a problem with the USB cable used.
    3 KB (402 words) - 09:06, 26 September 2022
  • ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR
    1 KB (154 words) - 08:36, 6 June 2022
  • * [[XBee USB Adapter]] * [[XBee USB Adapter]] for easy testing with PC.
    1 KB (153 words) - 08:17, 6 June 2022
  • *SIM7600 module is connected to the Raspberry Pi or Jetson Nano through the USB port, and then execute the command to see if the ttyUSB2 can be recognized ...gnized by the main control system such as Raspberry Pi. If you need to use USB debugging, you can use UART serial port (Raspberry Pi is ttyS0; Jetson Nano
    2 KB (413 words) - 08:54, 14 June 2022
  • |brief=5G, USB 3.1, and WiFi 6,Onboard antenna |caption=WiFi6 Industrial 5G CPE Wireless Router, Gigabit Ethernet / WiFi / USB 3.1 Type-C, Snapdragon X55 Onboard, <br>Mainly applicable for China, Europe
    2 KB (306 words) - 11:17, 6 June 2022
  • ...-AVR-JTAGICE-XPII|link=http://www.waveshare.com/USB-AVR-JTAGICE-XPII.htm | USB AVR JTAGICE XPII]] |More = [http://www.waveshare.com/USB-AVR-JTAGICE-XPII.htm More]}}
    2 KB (373 words) - 10:14, 6 June 2022
  • *[[:File:St-link_v2_usbdriver.zip|ST-LINK-V2 USB Driver]] ...INK/V2 (mini) performs the USB detection once powered up. In case that the USB initialization fails, the connections between the ST-LINK/V2 (mini) and oth
    2 KB (369 words) - 06:54, 11 August 2022
  • ...nnecting ST-LINK to the computer, the following error is prompted: ST-LINK USB communication eror? 1. If the USB port is in poor contact, try another USB port, or try another computer.<br/>
    3 KB (466 words) - 01:49, 21 September 2022
  • ...SIM7600 module is connected to the Raspberry Pi or Jetson Nano through the USB port, and then execute the command to see if ttyUSB2 can be recognized norm ...gnized by the main control system such as Raspberry Pi. If you need to use USB debugging, you can use UART serial port (ttyS0 for Raspberry Pi; Jetson Nan
    1 KB (253 words) - 03:27, 7 December 2021
  • *Mini HDMI port and micro USB On-The-Go (OTG) port *Micro USB power
    5 KB (678 words) - 06:10, 11 August 2022
  • 3. Connect BOOT and GND, set the switch to ON, or just connect the USB-C port. You can check the product page to understand the location of the BO 4. Connect the Micro USB/Type C interface (SLAVE port) of the carrier board to the host PC, then con
    4 KB (618 words) - 03:18, 12 October 2022
  • |interface1 = USB ...It can charge the 3.7V rechargeable Li battery through the solar panel or USB connection and provides a 5V/1A regulated output.
    5 KB (703 words) - 08:05, 8 August 2022
  • Onboard 4-ch USB interface, Fast Ethernet port and HDMI port, Raspberry Pi Zero 2W To 3B Ada *Onboard 1 Mirco USB 2.0 port with OTG.<br />
    3 KB (378 words) - 01:56, 30 September 2022
  • {{FAQ|Using the web USB function on win7, the driver displays an exclamation mark, and the drive le |The Web USB function only supports Windows 8 and above on Windows.
    2 KB (215 words) - 01:50, 11 August 2022
  • {{DISPLAYTITLE:CH343 USB UART Board}} ...ult|}}|url=link=https://www.waveshare.com/ch343-usb-uart-board.htm}}|CH343 USB UART Board]]
    6 KB (857 words) - 07:52, 10 August 2022
  • ...azon|0}}| default|}}|url=link=https://www.waveshare.com/usb-to-ttl-b.htm}}|USB TO TTL (B)]] |caption=USB TO UART solution with USB Type A connector
    6 KB (858 words) - 10:47, 18 August 2022
  • 2. Replace the USB cable to see if there is a problem with the USB cable used.<br/>
    2 KB (236 words) - 06:33, 23 November 2022
  • *U disk with USB interface or mobile hard disk (USB3,0 is recommended) *a USB data cable (Micro USB interface, for transmitting data)
    2 KB (415 words) - 07:56, 13 July 2022
  • *[[:File: USB-VC.7z]]
    541 bytes (83 words) - 11:14, 15 November 2019
  • |interface1 =USB *Touch interface: Type-C/USB
    2 KB (231 words) - 11:13, 6 June 2022
  • |caption= A USB Retro-gamming machine console. *Connect Arcade-D-1P to PC by USB cable, Open Control Panel -> Hardware and Sound -> Devices and Printers, yo
    1 KB (209 words) - 09:40, 6 June 2022
  • ...i-like development board, ARM cortex-A8, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR
    621 bytes (78 words) - 07:59, 6 June 2022
  • #Connect the USB (mini) interface of USART0 to the USB port of a PC. As shown in the following figure.<br />[[File:LPC_ISP_43xx_Co
    1 KB (212 words) - 03:29, 12 May 2015
  • |interface2=USB TO UART ..., use the computer USB to debug, and pay attention to whether the computer USB cable has 5V output. and point the antenna outward.
    4 KB (604 words) - 07:25, 3 August 2022
  • ...Port of PC; HDMI Port of LCD -> HDMI Port of PC. Please first connect the USB Ports then connect the HDMI Port). A new touch drive will be recognized by ...he LCD to your Pi (HDMI Port of LCD -> HDMI Port of Pi; USB Port of LCD -> USB Port of Pi; 5V~2A power supply). Download the Raspbian image from [https://
    5 KB (991 words) - 02:26, 9 March 2017
  • ...Port of PC; HDMI Port of LCD -> HDMI Port of PC. Please first connect the USB Ports then connect the HDMI Port). A new touch drive will be recognized by ...he LCD to your Pi (HDMI Port of LCD -> HDMI Port of Pi; USB Port of LCD -> USB Port of Pi; 5V~2A power supply). Download the Raspbian image from [https://
    6 KB (998 words) - 02:24, 9 March 2017
  • |interface1 = USB ...echarge the 18650 rechargeable Li-ion batteries through the solar panel or USB TYPE-C connection and provides 5V / 3A regulated output (with multi protoco
    4 KB (615 words) - 06:12, 2 September 2022
  • ...i-like development board, ARM cortex-A8, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR
    743 bytes (91 words) - 08:01, 6 June 2022
  • ...elopment board, ARM cortex-A7 Dual-Core, DDR3, HDMI, Ethernet, Nand Flash, USB, micro SD, SATA, IR
    651 bytes (77 words) - 08:52, 6 June 2022
  • *The USB interface (not the USB to UART) is connected to USB port of Pi
    2 KB (354 words) - 08:14, 11 November 2020
  • |caption2=800x600, 6inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface4=USB
    3 KB (358 words) - 11:24, 6 June 2022
  • |interface3=USB
    1 KB (141 words) - 10:35, 29 July 2022
  • 1.<font color="#ff0000"> DO NOT hot-plug any devices except the USB and HDMI. In particular, it is forbidden to install or remove the camera wi 3. The USB Type-C interface can be used as a power supply or as a USB SLAVE interface to program the image.<br/>
    5 KB (688 words) - 06:28, 3 November 2022
  • *USB: USB 3.0 + USB 2.0 (Micro USB)
    3 KB (426 words) - 01:31, 11 August 2022
  • |interface2=USB ...through this network port. The bottom layer of this method depends on the USB virtual serial port of SIM7600. This dial-up method can obtain the IP provi
    7 KB (1,058 words) - 06:13, 8 August 2022
  • |interface12 = USB |interface13 = USB HS ULPI
    2 KB (274 words) - 08:57, 6 June 2022
  • |interface12 = USB |interface13 = USB HS ULPI
    2 KB (274 words) - 09:53, 6 June 2022
  • ...Lite. It features three camera ports and commonly used ports like DSI and USB, more other peripheral interfaces are also supported through the FPC connec ...USB connector, convenient for flashing system image, or used as a regular USB port
    3 KB (387 words) - 11:20, 6 June 2022
  • ...Amazon|0}}| default|}}|url=link=http://www.waveshare.com/USB-CAN-B.htm}} | USB-CAN-B]] |caption= USB To CAN Converter
    14 KB (1,893 words) - 03:56, 18 November 2022
  • *4 x USB ports, which allows connecting more USB devices. *Onboard USB TO UART, for serial debugging.
    6 KB (925 words) - 01:53, 2 August 2022
  • ===Add support for 3G, 4G and other USB external devices=== USB Support
    11 KB (1,461 words) - 01:49, 19 August 2022
  • *Micro-USB power *Micro-USB OTG port
    4 KB (600 words) - 06:04, 11 August 2022
  • *[[:File:Capacitive-Fingerprint-Reader_(USB).7z |USB Software]]
    2 KB (288 words) - 10:00, 13 July 2022
  • Raspberry Pi 2 Model B Development Kits, USB WiFi, Camera, Mini Wireless Keyboard, etc.
    555 bytes (74 words) - 10:14, 6 June 2022
  • |interface10 = USB TO UART
    982 bytes (122 words) - 09:03, 6 June 2022
  • ...LCD to the USB interface on the Raspberry Pi board with a type-A-to-micro USB cable. The Virtual keyboard of Raspbian system enables you to save the USB resource, providing easy system operations. After the LCD is working proper
    8 KB (1,392 words) - 01:30, 18 February 2016
  • |interface15 = USB |interface16 = USB HS ULPI
    2 KB (297 words) - 09:23, 6 June 2022
  • |interface2=USB/I2C *Onboard dual touch circuit, optional USB Type-C or I2C touch, more application scenarios.<br/>
    6 KB (968 words) - 09:17, 22 August 2022
  • Raspberry Pi Model B+ (CN Ver.) Development Kits, USB WiFi, Camera, Mini Wireless Keyboard, etc.
    608 bytes (75 words) - 10:25, 6 June 2022
  • |interface15 = USB |interface16 = USB HS ULPI
    2 KB (309 words) - 08:58, 6 June 2022
  • |interface2 = USB
    1 KB (154 words) - 07:12, 16 May 2022
  • |interface2 = USB 2.0 ...of Raspberry Pi Compute Module 4 with a power supply interface of 5V/2.5A, USB Type C.
    6 KB (1,031 words) - 07:17, 3 November 2022
  • |interface4 = USB *Onboard USB HUB, allows connecting more USB devices.
    7 KB (916 words) - 02:51, 10 October 2022
  • * {{Retired|Arcade-D-1P, USB Arcade Control Box}} * {{Retired|CY7C68013A USB Board (mini)}}
    7 KB (933 words) - 03:10, 6 June 2022
  • *Onboard USB Type A interface, while satisfying the stable power supply of the Raspberry *POE-USB Type A output voltage: 5V 4A (MAX)
    2 KB (307 words) - 03:31, 23 August 2022
  • |interface1=USB *Play videos via USB flash drive, supported formats include MP4, AVI, RMVB, etc.
    2 KB (285 words) - 08:58, 6 June 2022
  • *USB 3.0 x 2, USB 2.0 x 2 *USB Type C power supply (5V/3A or above)
    3 KB (462 words) - 06:35, 25 October 2022
  • ...the battery, you should connect a 5V Micro USB power adapter to the micro USB port of the HAT.
    2 KB (351 words) - 03:23, 2 September 2022
  • ...computer. The company's Pioneer 600 expansion board has an onboard UART TO USB function. Use putty, xshell and other software to log in to the Raspberry P
    2 KB (341 words) - 01:57, 15 June 2022
  • *USB pogo pin: used to connect the USB signal line of zero 2w.
    2 KB (313 words) - 05:49, 30 August 2022
  • ...LCD to the USB interface on the Raspberry Pi board with a type-A-to-micro USB cable. The Virtual keyboard of Raspbian system enables you to save the USB resource, providing easy system operations. After the LCD is working proper
    8 KB (1,467 words) - 01:32, 18 February 2016
  • * [[XBee USB Adapter]]
    1 KB (130 words) - 07:58, 6 June 2022
  • |interface8 = USB
    943 bytes (120 words) - 14:02, 12 May 2022
  • ...color="#008DE6">When finished, connect the board to the power supply via a USB cable, and check whether the LED indicator is on, and whether the charger c <br><font color="#008DE6">Remove the impurities and plug the USB cable to the charger.</font> <br>
    4 KB (730 words) - 08:07, 20 March 2015
  • |interface=USB
    933 bytes (103 words) - 02:56, 15 November 2022
  • 1: <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> 4: The Type C interface can be used for the power supply or the USB SLAVE interface for programming the image. <br>
    7 KB (1,020 words) - 10:06, 12 October 2022
  • |interface6 = USB TO UART
    1 KB (135 words) - 08:28, 6 June 2022
  • |interface4=USB *[[:File:IT8951_USB_ProgrammingGuide_v.0.4_20161114.pdf|IT851 USB Programming Guide]]
    3 KB (366 words) - 02:34, 22 November 2022
  • |interface=USB
    1 KB (128 words) - 08:33, 30 August 2022
  • {{List|title=USB|{{Product List|Modules/Wired Communication/USB}}}} {{List|title=USB to UART / FIFO|{{Product List|Modules/Wired Communication/USB to UART / FIFO}}}}
    9 KB (1,189 words) - 06:50, 26 April 2022
  • |interface6 = USB TO UART
    1 KB (139 words) - 07:55, 6 June 2022
  • |interface2=USB
    1 KB (167 words) - 10:02, 5 August 2022
  • *USB: 2 x USB 3.1, DP (Optional), PD (Optional) Close-System Debug and Flashing Support o
    3 KB (357 words) - 08:46, 15 August 2022
  • |interface10 = USB TO UART
    1 KB (140 words) - 09:13, 6 June 2022
  • ...storage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes t ...n board and the case, and then connect it with the Raspberry Pi4 using the USB Adapter.
    6 KB (953 words) - 07:51, 25 August 2022
  • |interface1 =USB
    1 KB (181 words) - 07:20, 22 November 2022
  • 1. Download the driver: [[File:SIMCOM Windows USB Drivers V1.0.2.zip|SIM7600X driver file]]<br />
    1,007 bytes (152 words) - 01:51, 4 July 2022
  • **2 × USB 3.0 and 1 × USB 2.0 ports;
    2 KB (312 words) - 09:08, 3 August 2022
  • |interface6 = USB TO UART
    1 KB (139 words) - 10:54, 6 June 2022
  • When the installation is almost complete, the USB driver will pop up to install, click to install<br />
    1 KB (190 words) - 09:14, 8 November 2022
  • # 5V USB battery charging port # USB TO UART: easy for controlling the Pi via UART
    4 KB (537 words) - 07:42, 10 August 2022
  • |interface7 = USB TO UART
    1 KB (179 words) - 09:01, 6 June 2022
  • ...or="#008DE6">MCU, RTC IC, Temperature sensor, Lithium battery, Steel ball, USB interface, Magnet </font> <br>
    2 KB (237 words) - 10:14, 19 March 2015
  • *[[:File:St-link_v2_usbdriver.zip|ST-Link v2 USB Driver]]
    1 KB (164 words) - 06:52, 11 August 2022
  • |interface4 = USB
    1 KB (198 words) - 08:04, 10 August 2022
  • |interface10 = USB TO UART
    1 KB (143 words) - 10:46, 6 June 2022
  • Onboard 4-ch USB ports, Gigabit Ethernet port, headphone jack and PoE pin, Raspberry Pi CM4 *Onboard headphone jack (extended from USB).
    9 KB (1,363 words) - 08:14, 3 November 2022
  • |interface=USB
    1 KB (150 words) - 06:53, 21 October 2022
  • 1: <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> 3: Micro USB is used as the USB SLAVE interface to burn the image, and cannot be used as the OTG interface.
    7 KB (1,008 words) - 01:48, 2 August 2022
  • |interface2=USB TO UART
    1 KB (151 words) - 10:17, 6 June 2022
  • {{FAQ|Use spi or usb to transfer data? | ...indows also loads the USB driver according to the tutorial. If there is no USB driver, it will be displayed as an unknown device. .
    7 KB (1,174 words) - 12:05, 4 November 2022
  • *[[:File:st-link_v2_usbdriver.zip|ST-Link v2 USB Driver]]
    1 KB (168 words) - 08:29, 8 August 2022
  • |interfacd3=USB
    1 KB (183 words) - 09:24, 6 June 2022
  • |interface2=USB
    2 KB (203 words) - 07:11, 10 August 2022
  • *USB: 2x USB 3.1, DP (Optional), PD (Optional) Close-System Debug and Flashing Support o
    3 KB (384 words) - 08:44, 19 July 2022
  • |interface5=USB TO UART
    1 KB (179 words) - 03:15, 19 July 2022
  • |interface = USB Type-C 2.0/3.0
    2 KB (203 words) - 03:46, 28 November 2022
  • |interface2=USB
    1 KB (186 words) - 09:30, 4 August 2022
  • |interface7 = USB TO UART
    1 KB (153 words) - 07:56, 6 June 2022
  • ...hout Ethernet connections or monitors. In such cases, a USB serial module (USB to TTL) is necessary or you can choose our Raspberry Pi extension boards, e
    3 KB (455 words) - 03:58, 26 May 2017
  • *Micro-USB power *Micro-USB OTG port
    4 KB (518 words) - 10:09, 6 June 2022
  • |interface2 = USB
    1 KB (177 words) - 08:16, 6 June 2022
  • 2. If the Raspberry Pi supplies power to the SIM7600 through the USB cable alone, the power supply may be unstable, causing the SIM7600 to power ...of Jetson Nano or the Raspberry Pi Raspbian system has a built-in Qualcomm USB serial port driver. The non-new version of the mirror system may not have t
    4 KB (731 words) - 09:42, 14 June 2022
  • *Micro-USB power *Micro-USB OTG port
    4 KB (513 words) - 10:54, 6 June 2022
  • **2 × USB 3.0 and 1 × USB 2.0 ports;
    3 KB (386 words) - 07:31, 19 July 2022
  • **2 × USB 3.0 and 1 × USB 2.0 ports;
    2 KB (346 words) - 08:27, 30 August 2022
  • |interface7 = USB TO UART
    1 KB (169 words) - 09:01, 6 June 2022
  • =USB= ==Test USB Camera==
    9 KB (1,392 words) - 02:51, 14 November 2022
  • |4||USB SLAVE Interface||Writing emmc for Compute Module 4 |5||USB3.2 Interface||4 x USB 3.2 Gen1 interface for USB devices.
    4 KB (618 words) - 08:05, 10 August 2022
  • ...nd cards of the virtual machine and Jetson Nano work normally, and set the USB sound card as the default audio output device. *Select playback sound card USB PnP Audio Device.
    9 KB (1,518 words) - 01:40, 24 November 2022
  • * Connect the A7600X 4G HAT to the Raspberry Pi or Jetson Nano via the USB port, and then execute the following commands to check whether ttyUSB1 can
    896 bytes (149 words) - 08:08, 28 April 2021
  • |interface2 = USB
    1 KB (161 words) - 08:01, 6 June 2022
  • ...trol board to any USB interface of the Raspberry Pi with a type A to micro USB cable. ...to connect the Micro USB port of the main control board to any one of the USB ports of the PC.
    7 KB (1,076 words) - 06:27, 20 August 2022
  • ...nd cards of the virtual machine and Jetson Nano work normally, and set the USB sound card as the default audio output device. *Select playback sound card USB PnP Audio Device.
    10 KB (1,573 words) - 08:14, 25 July 2022
  • |interface2 = USB
    1 KB (170 words) - 09:00, 6 June 2022
  • |interface2 = USB
    1 KB (170 words) - 08:55, 6 June 2022
  • |interface2 = USB
    1 KB (171 words) - 08:59, 6 June 2022
  • |interface10 = USB TO UART
    2 KB (193 words) - 09:01, 6 June 2022
  • |interface2 = USB
    1 KB (170 words) - 09:04, 6 June 2022
  • |interface1 =USB
    2 KB (267 words) - 02:06, 20 August 2022
  • | interface1 = USB *If the USB can be recognized, it means that the Android driver has been installed succ
    3 KB (511 words) - 03:21, 8 August 2022
  • |interface2 = USB
    1 KB (169 words) - 08:06, 6 June 2022
  • |interface2 = USB
    1 KB (170 words) - 09:29, 6 June 2022
  • |interface2 = USB
    1 KB (170 words) - 08:35, 6 June 2022
  • |interface5=USB TO UART
    1 KB (173 words) - 10:37, 12 July 2022
  • |interface2 = USB
    1 KB (176 words) - 09:01, 6 June 2022
  • *2.Select SimTech HS-USB NMEA 9001 serial port
    1 KB (178 words) - 07:45, 31 May 2021
  • |interface2 = USB
    1 KB (173 words) - 10:31, 6 June 2022
  • |interface5 = USB TO UART
    1 KB (179 words) - 10:50, 6 June 2022
  • |interface1=USB Type-C *Touch interface: Type-C(Can be connected to the Type-C/USB port of the device).
    7 KB (1,084 words) - 09:09, 22 August 2022
  • |content = CSI & USB Camera
    2 KB (240 words) - 02:19, 23 June 2022
  • |interface2 = USB
    1 KB (181 words) - 10:13, 6 June 2022
  • Connect DoWatch to USB-USART module, see [[DoWatch_DEV_D1|Firmware Update]]
    1,005 bytes (173 words) - 11:13, 20 March 2015
  • ...loading the driver into the kernel, connect SIM7600 and Jetson Nano with a USB cable. After SIM7600 is turned on, wwan0 can be recognized. network port, t The bottom layer of this method depends on the USB virtual serial port of SIM7600.<br/>
    8 KB (1,370 words) - 02:57, 29 July 2022
  • Use the USB to the serial port module to connect the computer and Pico-BLE, open the SS
    1 KB (181 words) - 03:25, 11 August 2022
  • |interface10 = USB TO UART
    1 KB (174 words) - 08:22, 6 June 2022
  • |interface1 =USB ...s the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time a
    3 KB (484 words) - 02:12, 20 August 2022
  • ST-LINK USB communication eror|
    1 KB (197 words) - 06:05, 13 September 2022
  • |interface5 = USB TO UART
    1 KB (186 words) - 10:26, 6 June 2022
  • |interface1 =USB
    1 KB (186 words) - 03:34, 16 June 2022
  • |caption=Raspberry Pi 3B+ Package B with keyboard and USB camera
    2 KB (223 words) - 11:30, 6 June 2022
  • *'''Micro USB connector''' – for connecting PC, download code, serial communication, et ...will light on and the BOOT keeps off when you charge battery by connecting USB cable. CHG indicator will turn off after full charge.
    5 KB (838 words) - 10:18, 3 August 2018
  • |interface1 =USB :2. Connect the TOUCH interface of LCD to the USB interface of the PC. Wait for a while, the windows will automatically recog
    6 KB (915 words) - 03:33, 27 September 2022
  • |interface1=USB 2. Connect the TOUCH interface of the LCD to the USB interface of the PC. Waiting for a moment, The touch will be recognized by
    6 KB (964 words) - 03:39, 10 August 2022
  • 1.<font color="#ff0000"> DO NOT hot-plug any devices except the USB and HDMI.</font><br/> 3. The USB Type-C interface can be used as a power supply or as a USB SLAVE interface to program the image.<br/>
    10 KB (1,529 words) - 02:17, 8 November 2022
  • |caption=RPI, USB, UART, GPIO
    2 KB (259 words) - 07:31, 28 November 2022
  • |interface2 = USB
    1 KB (193 words) - 09:02, 6 June 2022
  • |interface = USB Type-C 2.0/3.0
    2 KB (281 words) - 02:16, 13 May 2022
  • Accessories Pack (type C) for Raspberry Pi, including USB WiFi, Camera, Mini Wireless Keyboard, etc.
    1 KB (179 words) - 10:13, 6 June 2022
  • *USB 3.0 x 2, USB 2.0 x 2 *USB Type C power supply (5V/3A or above)
    5 KB (709 words) - 01:54, 30 September 2022
  • {{FAQ|Why does the USB power supply fail to power off when the computer is used, but the power goe |The USB power supply capability of the Raspberry Pi is worse than that of the compu
    4 KB (618 words) - 08:26, 1 November 2022
  • |interface1 =USB
    2 KB (233 words) - 06:23, 20 August 2022
  • *USB 3.0 x 2, USB 2.0 x 2 *USB Type C power supply (5V/3A or above)
    5 KB (699 words) - 03:11, 6 June 2022
  • ...You can use the SD Card slot (if you have one) or a cheap SD adaptor in a USB port. ...[[:File:Win32DiskImager.zip|Win32DiskImager.exe]]; you can run this from a USB drive.you may need to run the utility as administrator. Right-click on the
    6 KB (1,027 words) - 09:21, 22 August 2022
  • |interface1 =USB * 7.9inch IPS screen, 400 x 1280 resolution, HDMI/USB interfaces.
    8 KB (1,153 words) - 07:41, 29 July 2022
  • ...ules kernel module, find and enter <font color="#FF0000">Kernel modules--->USB Support---><br /> -*- kmod-usb-core<br />
    10 KB (1,712 words) - 01:35, 19 August 2022
  • ...e for testing. (The operation steps described here are applicable to other USB to Serial Modules as well) Therefore, you need to install the CP2102 driver 3. Connect the CP2102 to the USB port of your PC, and then open the Device Manager to see if the correspondi
    7 KB (1,070 words) - 03:55, 14 March 2016
  • |caption=1920 × 1080<br/>HDMI, USB 7. Connect the Touch port of the LCD to the USB port of the Raspberry Pi, and the HDMI port of the LCD to the HDMI port of
    5 KB (759 words) - 03:35, 27 September 2022
  • |interface6 = USB TO UART
    2 KB (224 words) - 08:56, 6 June 2022
  • |interface1 =USB 2) Connect the Touch interface of the LCD to the USB interface of the PC. Wait for a while, the windows will automatically reco
    7 KB (1,081 words) - 07:57, 29 July 2022
  • |interface1 =USB ...s the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time a
    4 KB (533 words) - 10:41, 28 July 2022
  • |interface1 =USB 2. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize
    6 KB (990 words) - 03:31, 27 September 2022
  • #Connect PL2303 USB UART Board (mini)<ref>[[PL2303 USB UART Board (mini)]]</ref> to USART0. [[File:OpenM128-DS18B20-2.JPG|200px|Connect PL2303 USB UART Board (mini)]]
    18 KB (2,981 words) - 02:09, 23 May 2015
  • |caption=RP2040<br/>USB Type-C
    3 KB (359 words) - 06:55, 21 October 2022
  • |interface2=USB TO UART
    2 KB (248 words) - 08:47, 10 August 2022
  • ...on network port, if any [https://www.waveshare.com/eth-usb-hub-hat.htm ETH/USB HUB HAT] RTL8152 can also expand the 100M Ethernet port and support it.
    4 KB (618 words) - 03:01, 24 November 2022
  • |interface1 =USB |Put the TF card into the card reader and insert it into the USB port of the computer, open "My Computer", double-click to enter the "boot"
    3 KB (517 words) - 07:54, 29 July 2022
  • |interface3=USB
    4 KB (558 words) - 06:47, 20 June 2022
  • |caption1=FAN, CSI, HDMI<br/>USB 2.0, I2C, I2S<br/>SPI, RPi, Ethernet
    2 KB (283 words) - 01:16, 20 October 2022
  • *Onboard CH340, USB to UART converter *USB port for power input, firmware programming, or UART debugging
    4 KB (599 words) - 09:04, 6 June 2022
  • #To finish, eject the BOOT disk from the host PC. Disconnect the USB cable and power adapter, disconnect the BOOT, and set the switch to OFF. re
    1 KB (233 words) - 03:51, 12 October 2022
  • *Onboard USB HUB, allows connecting more USB devices. *Onboard USB TO UART, for serial debugging.
    14 KB (2,335 words) - 03:12, 18 November 2022
  • |interface6 = USB TO UART
    2 KB (287 words) - 10:11, 6 June 2022
  • |Interface1=Micro USB
    3 KB (455 words) - 02:34, 9 October 2022
  • |interface2=USB
    2 KB (348 words) - 07:32, 12 July 2022
  • ...onboard JTAG interface is used for programming with dedicated programmer [[USB Blaster]], as shown in the following figure:<br/> [[File:CoreEP2C5-Power-up-download.jpg|600px|Power up and connect USB Blaster]]<br/>
    4 KB (567 words) - 03:53, 1 June 2015
  • We supposed that you have a USB to serial module (also is embedded in [[Pioneer600]]) and attach it to your Whilst, connect the TX and RX pin to the USB to serial module attached to the PC. Then open a serial monitor tool on the
    4 KB (606 words) - 10:21, 19 August 2016
  • |interface = USB Type-C 2.0/3.0
    2 KB (327 words) - 06:31, 2 September 2022
  • |interface1=USB 2. Connect the TOUCH interface of LCD to the USB interface of PC . Waiting for a moment, The touch will be recognized by Win
    8 KB (1,304 words) - 11:02, 20 September 2022
  • 1: <font color="#ff0000">DO NOT unplug any devices other than HDMI and USB when powering on.</font><br> 4: Type C interface can be used for the power supply or a USB SLAVE interface for programming images. <br>
    13 KB (2,076 words) - 08:36, 10 October 2022
  • ...onboard JTAG interface is used for programming with dedicated programmer [[USB Blaster]], as shown in the following figure:<br/> [[File:CoreEP2C8-Power-up-download.jpg|600px|Power up and connect USB Blaster]]<br/>
    4 KB (583 words) - 03:53, 1 June 2015
  • ...RS232/485 TO ETH] and [https://www.waveshare.com/usb-to-rs232-485-ttl.htm USB TO RS232/485/TTL] via female to female crossover serial cable: {{FAQ| Why can I use USB TO RS232/RS485 to communicate normally, but cannot send and receive data wh
    4 KB (672 words) - 08:54, 5 August 2022
  • |interface2=USB
    3 KB (431 words) - 07:25, 8 August 2022
  • |interface1=USB
    2 KB (269 words) - 06:12, 20 June 2022
  • ...ally TCP/IP over USB, which is to run TCP/IP on the USB device, making the USB device look like a network card. The advantage of using this protocol is th *Use the accessory package USB-A male to A male cable or adapter to connect the Raspberry Pi to the expans
    10 KB (1,702 words) - 07:57, 9 November 2022
  • ...onboard JTAG interface is used for programming with dedicated programmer [[USB Blaster]], as shown in the following figure:<br/> [[File:CoreEP4CE6-Power-up-download.jpg|600px|Power up and connect USB Blaster]]<br/>
    4 KB (600 words) - 03:29, 1 June 2015
  • ...onboard JTAG interface is used for programming with dedicated programmer [[USB Blaster]], as shown in the following figure:<br/> [[File:CoreEP3C5-Power-up-download.jpg|600px|Power up and connect USB Blaster]]<br/>
    4 KB (600 words) - 03:29, 1 June 2015
  • |interface1 =USB
    2 KB (298 words) - 10:38, 28 July 2022
  • |interface1=USB 2. Connect the TOUCH interface of the LCD to the USB interface of the PC. Waiting for a moment, The touch will be recognized by
    7 KB (1,186 words) - 03:38, 10 August 2022
  • |interface2=USB | Supports firmware upgrade via USB port
    5 KB (708 words) - 06:38, 21 September 2022
  • ...onboard JTAG interface is used for programming with dedicated programmer [[USB Blaster]], as shown in the following figure:<br/> [[File:CoreEP3C16-Power-up-download.jpg|600px|Power up and connect USB Blaster]]<br/>
    4 KB (616 words) - 03:29, 1 June 2015
  • ...s can get range scan data through the communication interface (Serial port/USB).<br/> ...t (UART) as the communication interface, and the other interfaces, such as USB, can be used according to customer needs. The following table is the specif
    5 KB (775 words) - 01:40, 10 August 2022
  • *Onboard CH340, USB to UART converter *USB port for power input, firmware programming, or UART debugging
    4 KB (590 words) - 08:49, 6 June 2022
  • |interface5 = USB TO UART
    2 KB (362 words) - 10:49, 6 June 2022
  • *Micro-USB power *Micro-USB OTG port
    5 KB (642 words) - 10:46, 6 June 2022
  • *Onboard USB 3.1 interface, backward compatible with USB 2.0, can be used to connect to a computer, Raspberry Pi or Jetson Nano for *Onboard USB Type-C interface, which can be enabled by the switch, can be used for exter
    8 KB (1,174 words) - 09:22, 15 July 2022
  • |interface1 =USB
    2 KB (264 words) - 03:31, 16 June 2022
  • |interface1 =USB 1. Connect the TOUCH interface of LCD to the USB interface of PC. Waiting for a moment, The touch will be recognized by Wind
    7 KB (1,082 words) - 07:29, 10 August 2022
  • #You can use the USB to 485 device to communicate with the module first to ensure that there is
    2 KB (297 words) - 06:25, 11 August 2022
  • |caption=1920 × 720<br/> HDMI USB 2) Connect the TOUCH interface of the LCD to the USB of the PC. After a while, Windows will automatically recognize the touch fu
    6 KB (925 words) - 01:56, 10 August 2022
  • |interface1 =USB ...s the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time a
    4 KB (644 words) - 06:41, 29 July 2022
  • |interface1=USB 2. Connect the TOUCH interface of the LCD to the USB interface of PC. Waiting for a moment, The touch will be recognized by Wind
    6 KB (898 words) - 03:43, 10 August 2022
  • |interface1=USB 2. Connect the TOUCH interface of LCD to the USB interface of PC. Waiting for a moment, The touch will be recognized by Wind
    8 KB (1,308 words) - 03:58, 10 August 2022
  • |interface1 =USB ...s the Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time a
    5 KB (683 words) - 06:39, 29 July 2022
  • *Onboard USB 3.1 interface, backward compatible with USB 2.0, can be used to connect to a computer, Raspberry Pi or Jetson Nano for *On-board USB Type-C interface, which can be enabled by switch, can be used for external
    9 KB (1,520 words) - 02:18, 2 August 2022
  • *Power supply interface: USB port or PH2.0 connector *USB power input voltage: 5V
    15 KB (2,162 words) - 11:28, 6 June 2022
  • ...s://www.waveshare.com/rs232-485-to-eth.htm RS232 RS485 TO ETH/RS485 TO ETH/USB TO RS485 (Devices with onboard RS485)]
    2 KB (332 words) - 09:02, 27 September 2022
  • (If you need USB dialing, change ttyUSB2 to ttyS0, SIM7000X only supports ttyUSB2 dialing) T
    1 KB (231 words) - 08:56, 14 June 2022
  • (If you need USB dialing, change ttyUSB2 to ttyS0, SIM7000X only supports ttyUSB2 dialing) T
    1 KB (231 words) - 07:49, 12 November 2022
  • *SIM7600 module is connected to the Raspberry Pi or Jetson Nano through the USB port, and then execute the command to see if the ttyUSB2 can be recognized
    1 KB (246 words) - 09:03, 14 June 2022
  • |interface2 = USB
    2 KB (294 words) - 09:05, 6 June 2022
  • *Micro-USB power *Micro-USB OTG port
    5 KB (679 words) - 10:46, 6 June 2022
  • |interface1=USB
    2 KB (368 words) - 06:43, 11 August 2022
  • * [[XBee USB Adapter]] <h4>USB</h4>
    45 KB (5,211 words) - 06:31, 26 April 2022
  • |interface1 =USB
    3 KB (397 words) - 03:29, 27 September 2022
  • #Connect the USART interface of the board to the USB port of a PC with '''[[LPC ISP (mini)]]'''.
    2 KB (294 words) - 01:00, 9 June 2015
  • ..., 【Note】The receiver should be connected to the jetson nano instead of the USB port of the computer.
    2 KB (384 words) - 08:59, 8 November 2022
  • |caption2=1440 x 2560<br/>HDMI, USB
    2 KB (342 words) - 09:12, 7 November 2022
  • |interface18 = USB
    2 KB (312 words) - 09:04, 6 June 2022
  • *Connect the USB adapter of Gamepad to Raspberry Pi
    2 KB (247 words) - 01:58, 28 June 2022
  • |interface2=USB
    3 KB (394 words) - 07:03, 12 July 2022
  • |1 x 1 (PCIe Gen3) + 1 x 4 (PCIe Gen4), 1 x USB 3.0, 2 x USB 2.0 *Connect the Micro USB port of the Jetson Nano to the Ubuntu host with a USB cable (note that it is a data cable).
    8 KB (1,256 words) - 09:35, 3 September 2022
  • * [[XBee USB Adapter]] <h4>USB</h4>
    48 KB (5,576 words) - 10:42, 25 November 2022
  • | interface1 = USB
    2 KB (358 words) - 03:08, 24 November 2022
  • *Onboard CH340, USB to UART converter *USB port for power input, firmware programming, or UART debugging
    4 KB (574 words) - 11:23, 6 June 2022
  • 1. <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> 3. The USB SLAVE interface is used to burn the image and cannot be used as an OTG inte
    13 KB (1,932 words) - 02:23, 30 September 2022
  • *Plug the gamepad receiver into the USB port of the computer. <font color="#FF0000">[Note] The receiver should be c
    2 KB (382 words) - 09:54, 7 November 2022
  • |1 x 1/2/4 PCIE, 1 x USB 3.0, 3 x USB 2.0 #Micro USB port: for 5V power input or for USB data transmission
    12 KB (1,879 words) - 06:28, 8 November 2022
  • ...board, connect the pico to the USB port of the computer through the Micro USB cable, and release the button after the computer recognizes a removable har
    5 KB (757 words) - 02:33, 30 September 2022
  • *SIM7600 module is connected to the Raspberry Pi or Jetson Nano through the USB port, and then execute the command to see if the ttyUSB2 can be recognized
    2 KB (312 words) - 07:54, 9 October 2022
  • ...es, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc... #<font color=red>Do not plug and unplug any device except USB and HDMI when it is powered on.</font>
    14 KB (2,149 words) - 08:22, 1 September 2022
  • ...[Note] The receiver should be connected to the jetson nano instead of the USB port of the computer<br>
    2 KB (327 words) - 01:47, 19 July 2022
  • *Connect micro USB interface of STLINK-V3MINI, generally, it driver will be auto installed by
    2 KB (337 words) - 11:33, 6 June 2022
  • |interface2=USB Supports firmware upgrade via USB interface
    13 KB (2,164 words) - 03:49, 27 October 2022
  • |interface1=USB 2. Connect the TOUCH interface of LCD to the USB interface of PC . Waiting for a moment, The touch will be recognized by Win
    7 KB (1,128 words) - 10:16, 9 August 2022
  • |interface1 =USB
    3 KB (406 words) - 06:40, 10 August 2022
  • **2 × USB 3.0 and 1 × USB 2.0 ports; : 2) Connect the TOUCH interface of the LCD to the USB interface of the PC. After a while, Windows will automatically recognize th
    8 KB (1,232 words) - 08:43, 3 August 2022
  • |interface2=USB
    5 KB (636 words) - 09:49, 5 August 2022
  • |interface2=USB
    3 KB (442 words) - 01:15, 10 August 2022
  • ...not visible reboot your whole system, check your SIM, antenna, module and USB.
    7 KB (1,100 words) - 06:38, 21 September 2022
  • #Press and hold the "BOOTSEL" button, and then plug the Pico to the USB port of the Raspberry Pi or other computers. You can release the button aft
    2 KB (348 words) - 09:34, 31 August 2022
  • |interface1=USB
    2 KB (330 words) - 03:47, 10 August 2022
  • *Plug the gamepad receiver into the USB port of the computer. [Note] The receiver needs to be connected to the comp
    3 KB (483 words) - 08:50, 16 July 2022
  • ...le battery can be used to power the nodule, which could also be charged by USB via a charging circuit. ...about 8MB space. Now copy the microbit-joystickdemo .Hex file to the this USB flash disk.
    10 KB (1,539 words) - 08:50, 15 August 2022
  • |interface2=USB
    3 KB (453 words) - 10:06, 5 August 2022
  • |interface2=USB
    3 KB (471 words) - 09:59, 5 August 2022
  • * Connectivity: UART, SPI, I2C, USB, ETH * middlewares: FreeRTOS, FATFS, LwIP, USB
    6 KB (882 words) - 01:41, 25 August 2016
  • |interface5 = USB TO UART *<USB TO UART> CP2102, control the Pi through a serial terminal.
    3 KB (391 words) - 05:48, 23 November 2022
  • |interfacd3=USB ...bugging, Connect the DEBUG port on SIM-AM335X board to your PC with a mini-USB cable.
    6 KB (928 words) - 08:50, 6 June 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    3 KB (449 words) - 06:32, 16 July 2022
  • |interface2=USB
    5 KB (640 words) - 06:15, 21 September 2022
  • #Connect the Touch interface of the board to the USB interface of the Raspberry Pi. #Connect the Touch interface of the LCD to the USB interface of the PC.
    6 KB (1,014 words) - 08:24, 1 November 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    3 KB (469 words) - 06:17, 16 July 2022
  • #Connect the Touch interface of the board to the USB interface of the Raspberry Pi. #Connect the Touch interface of the LCD to the USB interface of the PC.
    6 KB (1,015 words) - 08:16, 22 July 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (475 words) - 06:41, 16 July 2022
  • *Connect the radar to the adapter board and to the computer by USB. *The host computer sends 0 through the USB serial port, no terminator is required, and the radar can be turned off.
    9 KB (1,273 words) - 10:17, 9 August 2022
  • |interface1 =USB
    4 KB (588 words) - 08:01, 29 July 2022
  • ...ing and playing, note that Raspberry Pi will auto reboot if you disconnect USB cable after charging.
    3 KB (483 words) - 08:06, 25 August 2022
  • |interface1 =USB/I2C
    3 KB (448 words) - 03:26, 1 September 2022
  • *Plug the gamepad receiver into the USB port of the computer. [Note] The receiver needs to be connected to the comp
    3 KB (537 words) - 07:54, 5 July 2022
  • *Install the glue stick antenna, install the USB connector, and install the camera data cable.
    4 KB (644 words) - 11:17, 27 July 2022
  • |website_cn=[http://www.waveshare.net/shop/usb-hub-hat.htm 官网] |website_en=[http://www.waveshare.com/usb-hub-hat.htm Website]
    3 KB (498 words) - 06:26, 11 August 2022
  • Jetson's Micro USB port has a default IP address of 192.168.55.1, users without a screen can r *Connect the micro USB port of the Jetson Nano to the computer with a USB cable.
    10 KB (1,590 words) - 08:23, 3 September 2022
  • |interface2=USB
    5 KB (758 words) - 09:33, 11 November 2022
  • |interface1 =USB 2) Connect the Touch interface of the LCD to the USB interface of the PC. Wait for a while, the windows will automatically reco
    10 KB (1,628 words) - 09:40, 15 September 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (487 words) - 06:45, 16 July 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (500 words) - 06:54, 16 August 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (504 words) - 06:55, 16 August 2022
  • |caption=1920 x 1080<br/>Type-C/Mini HDMI/USB
    3 KB (454 words) - 08:06, 20 September 2022
  • |caption2=1872 × 1404, 7.8inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface4=USB
    21 KB (3,189 words) - 06:11, 20 September 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (511 words) - 06:57, 16 August 2022
  • *Insert your CM3/CM3+ to PoE 4G board, then use a USB cable to connect the SLAVR interface of PoE 4G board to your PC, and then c *After writing, you can disconnect the USB cable, and re-power the POE 4G board to start the CM3/CM3+.
    14 KB (2,442 words) - 03:27, 26 April 2021
  • *USB 3.0 OTG x1 (Host/Device mode), USB 3.0 HOST x1 , USB 2.0 HOST x2 2.Open RK DriverAssitant to install ROCK3 Model A USB driver, this process does not need to connect ROCK3 Model A, restart the co
    18 KB (3,040 words) - 08:49, 16 June 2022
  • 5. Please connect the 5V power to the USB port of the PC with a Type-C cable, and you can see that the U flash drive
    3 KB (561 words) - 03:41, 25 November 2022
  • |interface1 =USB
    4 KB (514 words) - 11:24, 6 June 2022
  • The USB port is disabled by default on the CM4 to save power. If you need to start, ...e otg_mode=1 in [cm4] of config.txt, and add dtoverlay=dwc2, dr_mode=host (USB cannot be recognized without adding it). <br>
    11 KB (1,667 words) - 08:39, 20 October 2022
  • |interface1=RPI USB\SPI\I80 ...aper Display) HAT for Raspberry Pi, 1600 × 1200 resolution, 16 grayscales, USB/SPI/I80/I2C interface.
    19 KB (2,882 words) - 06:09, 20 September 2022
  • |interface1 =USB ...it when using. You need to hold the PCBA when plugging the HDMI cable and USB cable to protect the glass panel from hard pressure.</font></big>
    8 KB (1,216 words) - 11:07, 7 November 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (554 words) - 10:32, 2 September 2022
  • ...85 HAT is connected to [https://www.waveshare.com/usb-to-rs232-485-ttl.htm USB TO RS232/485/TTL]:<br/> Connect [https://www.waveshare.com/usb-to-rs232-485-ttl.htm USB TO RS232/485/TTL] to the computer, open the serial port assistant software,
    9 KB (1,431 words) - 07:02, 22 September 2022
  • |The cheese tool could only work with the USB camera. The IMX219 series are CSI camera. Please use the provided test comm
    4 KB (572 words) - 02:58, 28 November 2022
  • ...download it to the development board. Connect the board to your PC with a USB cable, and run the serial assistant on the PC. Select the corresponding ser ...t to the development board. Connect the development board to your PC via a USB cable, and run the serial debugging assistant on your PC. Select the corres
    9 KB (1,355 words) - 03:39, 13 December 2016
  • ...irectly behind the power supply barrel connector. This disables the Micro USB power input.
    4 KB (603 words) - 08:28, 17 October 2022
  • |interface4 = USB 3.2 2: The USB Type C interface is used as the USB SLAVE interface to burn the image, and it can also be used as the power sup
    13 KB (2,174 words) - 08:53, 27 July 2022
  • | 33 || D+ || USB differential data signal | 34 || D- || USB differential data signal
    14 KB (2,147 words) - 06:46, 14 September 2022
  • *Power on JetRacer AI Kit, and connect the micro USB interface of Jetson Nano Developer Kit to your PC. ...the Jetson Nano. After the system starts, the computer will recognize the USB network card. If the network card does not automatically obtain an IP, you
    14 KB (2,367 words) - 07:19, 18 July 2022
  • 5. Please connect the 5V power to the USB port of the PC with a Type-C cable, and you can see that the U flash drive
    4 KB (625 words) - 03:38, 25 November 2022
  • |caption1=DSI, CSI, HDMI, USB 2.0<br/>I2C, I2S, SPI, RPi<br/>Ethernet, FAN
    4 KB (633 words) - 08:35, 3 November 2022
  • *[https://www.waveshare.com/w/upload/6/62/CP210x_USB_TO_UART.zip CP210x USB TO UART.zip]
    4 KB (626 words) - 07:33, 7 November 2022
  • |interface2=USB
    5 KB (825 words) - 07:41, 25 August 2022
  • ...gle the No. 2 switch to "ON", this switch controls the power supply of the USB to the UART module. When you don't need to use it, you can manually turn of *Use a micro USB cable to connect the ESP32 driver board to a computer or 5V power supply.<b
    15 KB (2,317 words) - 06:35, 10 November 2022
  • |caption=Mini-Computer Powered by Raspberry Pi 3A+, 13.3inch HD Touch Screen, USB / ETH Ports |interface1=USB
    11 KB (1,641 words) - 03:46, 10 August 2022
  • |caption=High Precision Capacitive Fingerprint Reader (B), UART/USB Dual Ports
    9 KB (1,273 words) - 10:33, 13 July 2022
  • |interface3=USB ...aper Display) HAT for Raspberry Pi, 1872 x 1404 resolution, 16 gray scale, USB/SPI/I80/I2C interface
    19 KB (2,760 words) - 06:08, 20 September 2022
  • |interface1 =USB
    5 KB (859 words) - 01:33, 24 November 2022
  • |interface1=USB
    4 KB (628 words) - 06:52, 29 September 2022
  • * [https://www.waveshare.com/w/upload/6/62/CP210x_USB_TO_UART.zip CP210x USB TO UART.zip ]
    6 KB (906 words) - 07:06, 7 November 2022
  • |caption2=1200 × 825, 9.7inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface4=USB
    30 KB (4,547 words) - 06:14, 20 September 2022
  • You can quickly test the module by connecting it to PC with a USB to TTL module instead of a Raspberry Pi !PN532 NFC HAT!!USB to TTL Module
    22 KB (3,687 words) - 03:45, 2 August 2022
  • *Power on JetRacer AI Kit, and connect the micro USB interface of Jetson Nano Developer Kit to your PC ...the Jetson Nano. After the system starts, the computer will recognize the USB network card. If the network card does not automatically obtain an IP, you
    18 KB (2,973 words) - 09:07, 19 July 2022
  • |caption2=1872 × 1404, 10.3inch EPD HAT for Raspberry Pi, USB/SPI/I80/I2C interface |interface4=USB
    38 KB (5,530 words) - 06:12, 20 September 2022
  • |caption=JTAG/SWD Debugger Programmer with Micro USB Interface JTAG/SWD Debugger Programmer with Micro USB Interface
    12 KB (2,089 words) - 11:34, 12 May 2022
  • *Power on JetRacer AI Kit, and connect the micro USB interface of Jetson Nano Developer Kit to your PC *Unplug the USB cable from Jetson Nano
    16 KB (2,713 words) - 09:40, 7 November 2022
  • *Power on JetRacer AI Kit, and connect the micro USB interface of Jetson Nano Developer Kit to your PC *Unplug the USB cable from Jetson Nano
    17 KB (2,827 words) - 09:10, 19 July 2022
  • ...river to the micro SD card (or copy the driver to the system of Pi using a USB drive).
    5 KB (774 words) - 03:24, 21 October 2020
  • ...set the receiver of antenna on open area outside</font>. Connect the micro USB interface to PC<br \>
    6 KB (1,006 words) - 08:48, 6 June 2022
  • *Check the USB receiver of the gamepad to the computer, and a box will pop up, please sele
    8 KB (1,274 words) - 09:33, 4 November 2022
  • 5. Install the USB connector and the motor case. Now the installation is complete.<br/>
    8 KB (1,422 words) - 01:41, 21 November 2022
  • ...onnected to the adapter board, and then connect it to the computer through USB.<br/>
    6 KB (953 words) - 08:13, 10 August 2022
  • |interface2=USB
    9 KB (1,320 words) - 10:07, 5 August 2022
  • *Check the USB receiver of the gamepad to the computer, and a box will pop up, please sele
    9 KB (1,424 words) - 01:22, 24 November 2022
  • ...need to charge the GPM280 by connecting a 5V/3A power adapter to the Micro USB interface. The indicator light will flash when charging, and the GPM280 sup
    8 KB (1,244 words) - 07:45, 6 September 2022
  • *Plug the USB receiver of the gamepad to the jetbot.
    9 KB (1,455 words) - 09:53, 13 July 2022
  • ...set the receiver of antenna on open area outside</font>. Connect the micro USB interface to PC<br \>
    8 KB (1,260 words) - 07:07, 7 September 2022
  • You can use the USB to 232 device to communicate with the 2-CH RS232 HAT first to ensure that t
    8 KB (1,182 words) - 07:38, 20 August 2022
  • ...to receive a GPS signal</font>, and connect the Module to the PC by Micro USB cable.<br \>
    8 KB (1,355 words) - 03:12, 9 October 2022
  • *Connect USB adapter to PC
    12 KB (1,918 words) - 11:23, 6 June 2022
  • 3. USB TO UART Interface<br/> 4. USB interface: the USB port of nRF52840<br/>
    97 KB (15,882 words) - 06:22, 20 July 2022
  • 2. Please make sure you have connected the USB adapter to Raspberry Pi and NAS adapter board.<br/>
    11 KB (1,806 words) - 10:07, 3 November 2022
  • 5) Connect the TF card and USB keyboard to the Raspberry Pi, turn on the power switch, start the Raspberry
    12 KB (1,912 words) - 02:31, 7 November 2022
  • 2.Open the RK driver assistant DriverAssitant to install the USB driver, this process does not need to connect the Tinker Board 2S, restart 5.Connect one end of the Type C cable to the USB port of the computer, and the other end to the Type C port of Tinker Board
    52 KB (8,515 words) - 01:59, 23 June 2022
  • # 5V USB battery charging port
    14 KB (2,274 words) - 02:45, 21 September 2022
  • *Connect USB adapter to PC
    15 KB (2,512 words) - 08:05, 3 August 2022
  • 3. Please connect the expansion board to I2C and Jetson Nano by USB, and it will be recognized after connecting correctly.<br/>
    14 KB (2,331 words) - 01:59, 10 August 2022
  • ...ing. You may require an [https://www.waveshare.com/eth-usb-hub-hat.htm ETH/USB HUB HAT in this steps]
    17 KB (2,747 words) - 09:07, 21 November 2022
  • *Hardware connection reference (you also need a USB TO TTL module):
    21 KB (2,926 words) - 03:39, 9 August 2022

View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)