Search results

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/7.9inch-dsi-lcd.htm}}]] |caption=400 x 1280, RPI, DSI

*10.1-inch DSI touch screen with 10-point capacitive touch control. *Can be directly connected to the LCD by the DSI interface of the Raspberry Pi, and its refreshing rate is up to 60Hz.

|name1 = 7inch DSI LCD |name2 = 7inch DSI LCD (with case A)

*8-inch DSI touch screen with 10-point capacitive touch. *Drive LCD directly through Raspberry Pi's DSI interface with a refresh rate of up to 60Hz.

*7-inch DSI touch screen, 5-point capacitive touch control. *Support drives the LCD directly via the DSI interface of the Raspberry Pi, and the refresh rate is up to 60Hz.

...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/5inch-dsi-lcd.htm}}]] |caption=5inch capacitive Touch Screen LCD for Raspberry Pi<br/>DSI Interface

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/4.3inch-dsi-lcd.htm}}]] |caption=4.3inch capacitive Touch Screen LCD for Raspberry Pi, DSI Interface

|name1 = 7inch DSI LCD (with cam) |name2 = 7inch DSI LCD (with cam and case)

|interface1=DSI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.

*Drive the LCD directly via the DSI interface of the Raspberry Pi, up to 60Hz refresh rate. ...ports Pi 4B/3B+/3A+, another [https://www.waveshare.com/dsi-cable-15cm.htm DSI-Cable-15cm] is required for CM3+/4.

...|{{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/5inch-dsi-lcd-b.htm}}]] |caption=5inch Capacitive Touch Screen LCD for Raspberry Pi, DSI Interface

|name=2.8inch DSI LCD ...fault|}}|url=link=https://www.waveshare.com/2.8inch-dsi-lcd.htm}} |2.8inch DSI LCD}}]]

*3.4-inch DSI round display with 10-point capacitive touch. *Directly drive LCD via Raspberry Pi's DSI interface, refresh rate up to 60Hz.

|name = 7inch DSI LCD (C) ...default|}}|url=link=https://www.waveshare.com/7inch-dsi-lcd-c.htm}}|7inch DSI LCD (C)]]

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/4.3inch-dsi-qled.htm}}]] |caption=800x480, DSI

...or users who need a lightweight DSI display. Compared with the traditional DSI screen, it is lighter and more convenient for secondary development. .../3+/4 expansion board need a [https://www.waveshare.com/dsi-cable-15cm.htm DSI Cable 15cm].

...or users who need a lightweight DSI display. Compared with the traditional DSI screen, it is lighter and more convenient for secondary development. .../3+/4 expansion board need a [https://www.waveshare.com/dsi-cable-15cm.htm DSI-Cable-15cm].

2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br> ...the DSI1 display interface is not connected. (V4 version starts to display interface for DSI1)<br>

| Display interface || Standard HDMI port|| / | Power port || 5V Type-C interface || /

...#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/11.9inch-dsi-lcd.htm?amazon}}]] |caption=320 x 1480, RPI, DSI

...{#urlget:Amazon|0}}| default|}}|url=link=https://www.waveshare.com/7.9inch-dsi-lcd.htm}}]] |caption=400 x 1280, RPI, DSI

...the Raspberry Pi Compute Module 4. It is powered by a 5V/ 2.5A USB Type C interface. 2: <font color="#FF0000">The DSI interface is changed from DSI0 to DSI1, which already supports high resolution. </fon

*Onboard HDMI / DSI interfaces for connecting displays. *Cooling fan interface, autorun on power-up OR controlled by IO pins.

...is a baseboard of Raspberry Pi Compute Module 4 with a 5V/2.5A USB Type C interface. #The Type C interface can be used as a power supply or as a USB SLAVE interface to burn the image.

|interface1=DSI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4.

*DSI interface is DSI1. |1||Micro USB||5V/2.5A power supply, can also be used as an eMMC programming interface

...ng off-the-shelf components such as Raspberry Pi HAT and PCIe modules. Its interface is concentrated on the same side, which is convenient for users to use. Note: PCle interface does not support MSI-X. Typical PCle devices will fall back to MSI.

|caption=DSI<br/>10.3" HDMI EINK Monitor<br/>Resolution: 1872x1404<br/>Compatible with R This is a 10.3inch e-Paper monitor with a resolution of 1872 x 1404, HDMI interface. Supports Raspberry Pi, jetson Nano and Windows PC.

...network communication modes, and expands a variety of industrial isolated interface resources (such as CAN, RS485, RS232, ADC, GPIO, etc.), which is suitable f ...tiation Ethernet port, supports power via the PoE Ethernet interface (RJ45 interface specification).

*CSI camera interface *DSI display interface

...s the USB SLAVE interface to burn the image, and cannot be used as the OTG interface.<br> 5: Onboard default 4 x USB 3.2 Gen1 interface.<br>

3. Micro USB is used as a USB SLAVE interface to write images, not as an OTG interface.<br/> |4||USB SLAVE Interface||Writing emmc for Compute Module 4

|caption=Compute Module 3 Adapter<br/>HDMI, CSI, DSI *CM3 interface: used to connect to the CM3 baseboard.

...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc... #The Type C interface can be used as a power supply or as a USB interface to burn the image (need to use the DIP switch to switch).

|interface1 = DSI ...also be used as the power supply interface, but cannot be used as the OTG interface.<br />

*CSI camera interface *DSI display interface

...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.<br> 5. Onboard default 4-way USB 2.0 interface.<br>

*CSI camera interface *DSI display interface

#The Type C port can be used as a power supply or as a USB SLAVE interface to program images.<br> ...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br>

*With 3.5mm audio and speaker interface, support HDMI audio output.<br/> 1. Set the touch interface selector switch on the back of the screen to "I2C".<br>

|caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet *2 × 4-lane MIPI DSI/CSI interface

|interface1 = DSI ...rage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot sp

...r supply of CM4, please do not connect other devices when using the Type C interface to program the image. <br> 6: <font color="#ff0000">The USB2.0 interface is disabled by default, you should add line ''dtoverlay=dwc2,dr_mode=host''

The computer is connected to the ETH0 interface, and then directly ssh remote login or web page login.<br /> .../www.raspberrypi.org/documentation/hardware/computemodule/cmio-display.md DSI Display Reference]

*With 3.5mm audio and 4PIN speaker interface, it also supports HDMI audio output. 1) Connect the 12V power supply to the DC interface of the LCD, and you can see that the LCD backlight is on normally.<br/>

|caption=7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems 7 inch Capacitive Touch Screen LCD, HDMI interface, with a resolution of 800 × 480and a capacitive touch panel, which support

|caption=5 inch Resistive Touch Screen LCD, HDMI interface, supports various systems ''' Supported models: Support Waveshare DSI LCD, DPI LCD, and HDMI LCD capacitive touch screen series.'''

|caption=480x800, 4inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. 480x800, 4inch IPS Display for Raspberry Pi, DPI interface, 5-points capacitive touch control.

|caption=800 x 480, 5inch IPS Display for Raspberry Pi, DPI interface, no Touch 800 x 480, 5inch IPS Display for Raspberry Pi, DPI interface, no Touch

{{FAQ|How to solve the abnormal BOOT interface when the Raspberry Pi 4B is connected?| '''Supported models: Support Waveshare DSI LCD, DPI LCD and HDMI LCD capacitive touch screen series.'''

*1-WIRE interface, for connecting single-bus devices like DS18B20. *Sensor interface.

|caption=1024 x 600, 7inch IPS Display for Raspberry Pi, DPI interface, no Touch 1024 x 600, 7inch IPS Display for Raspberry Pi, DPI interface, no Touch.

...ry Pi with a 6mm fixed-focus wide-angle lens, and a 4.3-inch 800x480 pixel DSI touch screen as the display screen. It is easy to assemble and more conveni ===4.3inch DSI LCD Parameters===

...ry Pi with a 6mm fixed-focus wide-angle lens, and a 4.3-inch 800x480 pixel DSI touch screen as the display screen. It is easy to assemble and more conveni ===4.3inch DSI LCD Parameters===

...ss module. Also, it has multiple onboard interfaces, including M.2 / CSI / DSI / HDMI / eMMC / USB 3.0 / 40PIN GPIO / RJ45 Gigabit Ethernet port / TF card ...DSI × 1 (1080p@30fps);<br />4-lane MIPI DSI × 1 (2K@30fps);<br />Only one DSI port can be used for display at the same time.

|caption=3.5inch IPS Display for Raspberry Pi<br/>640 x 480, DPI interface, 5-points Touch 640 x 480, 3.5inch IPS Display for Raspberry Pi, DPI interface, 5-point capacitive touch control.

<font size = 3 >1. Connect 12/1A power adapter to the DC interface of the LCD, and you can see its backlight is on after the successful connec 2. Connect the TOUCH interface of the LCD to the USB interface of the PC. Waiting for a moment, The touch will be recognized by Windows au

|caption=5 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems ...e Raspberry Pi to drive other high-power devices at the same time, the USB interface on the Raspberry Pi may be insufficiently powered, at this time an external

|caption=480 x 640, 2.8inch IPS Display for Raspberry Pi, DPI interface, 5-points Touch. 480 x 640, 2.8inch IPS Display for Raspberry Pi, DPI interface, 5-points capacitive touch control.

*Designed for Raspberry Pi, based on Raspberry Pi 40pin GPIO interface. *Using DPI666 interface of Raspberry Pi to drive LCD, refresh rate up to 60Hz.

| HDMI 2.0/DP1.2 | EDP 1.4 | DSI (1 x 2) 2 simultaneous |4||Type-C Interface||For Power Supply, Programming and Debugging

*HDMI interface (support 4K*2K@60) *40PIN GPIO Interface

...related to the Linux system (including those required to run the graphical interface), such as ls, mkdir, rm, etc. *Used to display the network configuration details of an interface on the current system when run with no arguments (ie) ifconfig.<br/>

<h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}

Supported model: Support Waveshare DSI LCD, DPI LCD, and HDMI LCD capacitive touch series. *Make sure that the HDMI interface of the PC can output normally.

...he circular interface and do not need to use a jumper cap to short the J48 interface first. ...appearance and interface. It is suitable for users who do not require more interface resources. The core board of the Lite version also uses the Jetson Nano Mod

<h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}