Search results

Jump to: navigation, search
  • ...HDMI interface, one CSI interface and one USB interface, standard arduino interface, etc... 1: <font color="#ff0000">Do not plug and unplug any device except USB and HDMI when powered on.</font><br>
    3 KB (414 words) - 02:07, 12 July 2023
  • |1||Compute Module interface |2||DSI interface
    3 KB (356 words) - 03:54, 2 June 2023
  • ...hange. The BeagleBone Black will read the display parameters of the 5 inch HDMI displayer and set the resolution to 800*480 automatically. #Connect the LCD to the HDMI on the BeagleBone board with a HDMI to micro HDMI cable;
    3 KB (439 words) - 09:24, 9 November 2015
  • ...Two IMX219 800MP cameras are integrated for the stereo vision projects. An interface expander board is optional for connecting other accessories. 1: <font color="#ff0000">Do not unplug devices other than USB and HDMI when powered on.</font><br>
    3 KB (476 words) - 08:52, 25 July 2023
  • *The DSI interface is DSI1. ...B Type C interface is for the power supply or can be used as the USB SLAVE interface for programming images.
    3 KB (456 words) - 09:57, 6 December 2023
  • ...o USB cable to connect the Touch interface of the touch screen and any USB interface of the PC. # Connect the touch screen and the HDMI port of the PC with an HDMI cable. After about a few seconds, you can see the LCD display normally.
    3 KB (509 words) - 06:02, 4 September 2023
  • |Micro SD Card 8GB |HDMI to VGA Convertor
    2 KB (185 words) - 03:42, 9 November 2015
  • *Video & Sound: 2 × micro HDMI ports (supports up to 4Kp60) ·Type-C Interface: Power interface, require 5V/3A power adapter.
    3 KB (396 words) - 03:20, 7 December 2023
  • ...th Raspberry Pi Compute Module 4, using 5V/ 2.5A USB Type Powered by the C interface, it can be directly connected to the CM4 core board, equipped with a 2.8-in ...e; color=#DD1223>1: The display uses the DIP interface instead of the HDMI interface. </font><br />
    2 KB (341 words) - 01:26, 2 August 2022
  • 7inch HDMI LCD (C) User Manual - Based on Firmware Rev 2.1. ...uch drive will be recognized by Windows and you can use the LCD as a human interface device. When multiple displays are detected by your PC, the LCD can only be
    5 KB (991 words) - 02:26, 9 March 2017
  • |HDMI|| HDMI *Camera interface: for connecting to the CAM of zero 2w.
    2 KB (314 words) - 08:01, 17 August 2023
  • 7inch HDMI LCD (B) User Manual - Based on Firmware Rev 2.1. ...uch drive will be recognized by Windows and you can use the LCD as a human interface device. When multiple displays are detected by your PC, the LCD can only be
    6 KB (998 words) - 02:24, 9 March 2017
  • *Video&Sound: 2 × micro HDMI ports (supports up to 4Kp60) ·Type-C Interface: Power interface, require 5V/3A power adapter.
    2 KB (331 words) - 10:29, 16 August 2023
  • *Video & Sound: 2 × micro HDMI ports (supports up to 4Kp60) ·Type-C Interface: Power interface, require 5V/3A power adapter.
    3 KB (436 words) - 03:17, 7 December 2023
  • |interface3=HDMI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.
    5 KB (697 words) - 07:18, 24 February 2024
  • |name=10.1inch HDMI LCD (with case) ...{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/10.1inch-hdmi-lcd-with-case.htm}}]]
    7 KB (1,081 words) - 06:41, 1 November 2023
  • 7inch HDMI LCD (B) User Manual - Based on Firmware Rev 1.1. ...rive.google.com/file/d/0B5ceUb50sIDnVXNTbzhaSGp0UHM/view?usp=sharing 7inch HDMI LCD (C) Raspberry B / B+ Raspbian image]'''.
    8 KB (1,392 words) - 01:30, 18 February 2016
  • ...ion of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) ...works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
    5 KB (748 words) - 06:36, 15 March 2017
  • 5inch HDMI LCD (B) User Manual - Based on Firmware Rev 2.1. ...erface of the LCD to one of the USB interfaces on your PC with a Type A to micro USB cable.
    9 KB (1,500 words) - 07:58, 1 April 2017
  • ...ion of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) ...works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
    5 KB (774 words) - 03:24, 21 October 2020
  • *micro HDMI x 2 (supports 4Kp60) *CSI camera interface
    3 KB (465 words) - 02:39, 7 December 2023
  • 7inch HDMI LCD (B) User Manual - Based on Firmware Rev 1.1. ...ry Pi Model B/A+/B+, you can use '''[http://pan.baidu.com/s/1pJE8Xzt 7inch HDMI LCD (B) Raspberry Pi B / B+ Raspbian image (Download password: j7ns)]'''.
    8 KB (1,467 words) - 01:32, 18 February 2016
  • *Micro SD card slot *Mini-HDMI port (1080p60 video output)
    5 KB (704 words) - 05:53, 4 September 2023
  • |colspan=3 |1x Micro USB port (supports USB HUB expansion) |colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
    5 KB (817 words) - 05:53, 4 September 2023
  • #<font color="#FF0000">DO NOT hot-plug any devices except the USB and HDMI.</font> #DO NOT connect other devices while writing CM4 via Type C interface for stable working.
    4 KB (672 words) - 03:01, 14 July 2023
  • 1: <font color="#ff0000">Do not plug and unplug any device except USB and HDMI when powered on.</font><br> ...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface. <br>
    4 KB (636 words) - 08:50, 25 July 2023
  • 1: <font color="#ff0000">Do not plug and unplug any device except USB and HDMI when powered on.</font><br> 3: The Type C interface of the USB SLAVE is only used to burn the image and cannot be used for powe
    5 KB (742 words) - 08:04, 10 August 2022
  • 1: <font color="#ff0000">Do not plug and unplug any device except USB and HDMI when powered on.</font><br> 3: The Type C interface is only used as the USB SLAVE interface to program the image, and cannot be used as a power supply. <br>
    4 KB (613 words) - 09:08, 9 August 2023
  • *Connect the Power interface of LCD to the USB port of PC or 5V power adapter *Connect the HDMI interface of the LCD to the HDMI interface of the PC
    6 KB (922 words) - 06:04, 4 September 2023
  • <font color="#FF0000">1. Do not unplug any devices except USB and HDMI when powering on.</font><br/> 3. Only support LCD direct connection as there is not a DSI interface.<br/>
    6 KB (910 words) - 08:41, 29 January 2023
  • *Onboard HDMI / DSI interfaces for connecting displays. *Cooling fan interface, autorun on power-up OR controlled by IO pins.
    6 KB (915 words) - 06:53, 4 September 2023
  • ...spberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing additional 4G / 5G / LoRa wireless communication m <font color="#FF0000">1. DO NOT hot-plug any devices except the USB and HDMI.</font><br/>
    5 KB (830 words) - 09:10, 25 July 2023
  • |interface6 = HDMI ...network communication modes, and expands a variety of industrial isolated interface resources (such as CAN, RS485, RS232, ADC, GPIO, etc.), which is suitable f
    7 KB (915 words) - 15:15, 31 August 2023
  • [[File:10.3inch-HDMI-e-Paper-details-5.jpg|10.3inch-HDMI-e-Paper-details-5.jpg]] ...inch HDMI e-Paper (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1872 x 1404 resolution.
    6 KB (991 words) - 01:43, 14 December 2023
  • [[File:7.8inch-HDMI-e-Paper-01.jpg|700px]] ...inch HDMI e-Paper (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1872 x 1404 resolution.
    7 KB (1,095 words) - 01:45, 14 December 2023
  • ...the Raspberry Pi Compute Module 4. It is powered by a 5V/ 2.5A USB Type C interface. 2: <font color="#FF0000">The DSI interface is changed from DSI0 to DSI1, which already supports high resolution. </fon
    8 KB (1,284 words) - 06:59, 3 January 2024
  • 7-inch HDMI display, with a resolution of 1024 × 600 and a capacitive touch panel, whi |More = [http://www.waveshare.com/7inch-HDMI-LCD-C.htm More]}}
    5 KB (662 words) - 10:57, 7 December 2023
  • [[File:10.3inch-HDMI-e-Paper-details-5.jpg|500px]] ...inch HDMI e-Paper (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1200 x 825 resolution.
    7 KB (1,166 words) - 01:44, 14 December 2023
  • [[File:10.3inch-HDMI-e-Paper-details-5.jpg|600px]] ...inch HDMI e-Paper (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1600 x 1200 resolution.
    7 KB (1,167 words) - 01:41, 14 December 2023
  • *micro HDMI x 2 (supports 4Kp60) *CSI camera interface
    5 KB (700 words) - 05:53, 4 September 2023
  • #Connect the LCD to the HDMI on the Banana Pi board with a HDMI cable; ...terface on the LCD to the USB interface on the Banana Pi board with a dual micro USB cable.
    4 KB (755 words) - 09:25, 9 November 2015
  • |colspan=3 |1x Micro USB port (supports USB HUB expansion) |colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
    4 KB (574 words) - 06:03, 4 September 2023
  • |colspan=3 |1x Micro USB port (supports USB HUB expansion) |colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
    4 KB (601 words) - 05:55, 4 September 2023
  • *micro HDMI x 2 (supports 4Kp60) *CSI camera interface
    5 KB (731 words) - 01:53, 7 December 2023
  • <font color="#FF0000">1. Do not unplug any device except USB and HDMI when the power is on.</font><br/> 3. The Type C interface is only used as a USB SLAVE interface to burn images, and cannot be used as a power supply.<br/>
    4 KB (617 words) - 03:38, 2 December 2022
  • #Connect the LCD to the HDMI on the Raspberry Pi board with a HDMI cable; ...D to the USB interface on the Raspberry Pi board with a USB type-A male to micro-B cable.
    6 KB (1,013 words) - 07:11, 20 June 2016
  • 1: <font color="#ff0000">Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> 3: Type C interface can be used for the power supply or a USB SLAVE interface for burning images. <br>
    5 KB (779 words) - 06:49, 19 December 2023
  • 1: <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> ...s the USB SLAVE interface to burn the image, and cannot be used as the OTG interface.<br>
    7 KB (1,007 words) - 15:16, 31 August 2023
  • *Video & Sound: 2 × micro HDMI ports (supports up to 4Kp60) ·Type-C Interface: Power interface, require 5V/3A power adapter.
    8 KB (1,283 words) - 03:19, 7 December 2023
  • 1.<font color="#ff0000"> DO NOT hot-plug any devices except the USB and HDMI. </font><br/> 3. Micro USB is used as a USB SLAVE interface to write images, not as an OTG interface.<br/>
    7 KB (971 words) - 05:54, 4 September 2023
  • ...ion of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable). # Connect the HDMI Connector to both the HDMI interfaces on the LCD and the Pi.
    9 KB (1,310 words) - 07:43, 20 October 2023
  • 2: <font color="#ff0000">DSI interface is changed from DSI0 to DSI1, high resolution is supported</font><br> 1: <font color="#ff0000">DO NOT unplug any devices other than HDMI and USB when powering on.</font><br>
    11 KB (1,717 words) - 10:10, 25 March 2024
  • |interface3 = micro HDMI ...rage drive. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the reading and writing speed and makes the boot sp
    6 KB (958 words) - 09:49, 14 November 2023
  • |colspan=3 |1x Micro USB port (supports USB HUB expansion) |colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
    5 KB (720 words) - 03:35, 7 December 2023
  • |caption=DSI, CSI, micro HDMI, USB2.0/3.0 <br/>I2C, I2S, SPI, UART, RPi, Ethernet *micro HDMI x 2 (support 4Kp60)
    8 KB (1,166 words) - 01:29, 29 February 2024
  • |colspan=3 |1x Micro USB port (supports USB HUB expansion) |colspan=3| Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 12
    6 KB (811 words) - 03:33, 7 December 2023
  • <h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}
    45 KB (5,211 words) - 06:31, 26 April 2022
  • *1-WIRE interface, for connecting single-bus devices like DS18B20. *Sensor interface.
    16 KB (2,574 words) - 01:46, 13 March 2024
  • |interface3=HDMI ...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4.
    12 KB (1,884 words) - 09:34, 25 January 2024
  • ...the EINK-DISP-103 (called "the display" hereafter) to the master device by HDMI cable. The display can only work with 1872x1404 resolution. *Connect the 5V/3A power adapter to Power interface of the display.
    9 KB (1,534 words) - 06:00, 4 September 2023
  • *DSI interface is DSI1. *Micro USB port is for power supply and for programming images USB SLAVE.
    9 KB (1,367 words) - 08:05, 26 October 2023
  • ...nboard four isolated RS485 interfaces, 100M+1000M dual network ports, HDMI interface, two CSI interfaces, two USB interfaces, etc... #<font color=red>Do not plug and unplug any device except USB and HDMI when it is powered on.</font>
    14 KB (2,130 words) - 07:56, 19 December 2023
  • #micro HDMI to HDMI cable #Computer monitor or TV with HDMI interface (other interface monitors can use interface converter.)
    9 KB (1,383 words) - 07:33, 1 September 2023
  • <h4>Interface / Expansion</h4> {{Product Lists|Raspberry Pi/HATs/Interface-Expansion}}
    54 KB (6,352 words) - 01:43, 28 March 2024
  • ..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
    16 KB (2,375 words) - 11:56, 2 January 2024
  • ..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
    16 KB (2,408 words) - 06:52, 4 September 2023
  • ..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH.)
    16 KB (2,409 words) - 11:55, 2 January 2024
  • ..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...g in to the Raspberry Pi terminal, (You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
    16 KB (2,507 words) - 09:09, 6 February 2024
  • ...and click 'Write' to write the system image. ( How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
    17 KB (2,563 words) - 07:27, 24 February 2024
  • ..., and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See [[RPi-Image-Installation-Guides|RPi Image Installa ...og in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH.)
    16 KB (2,442 words) - 09:36, 6 February 2024
  • ...recommend our [https://www.waveshare.com/catalogsearch/result/?q=HDMI+LCD HDMI display]), keyboard and Mouse to Jetson Nano Developer Kit *If you have an HDMI screen, keyboard and mouse, etc., plug the device into the jetson nano.
    10 KB (1,601 words) - 09:06, 20 October 2023
  • *Compatible with Raspberry Pi A+/B+/2B/3B/3B+4B (external HDMI adapter is required for Pi Zero/Zero W/Zerao WH). # Connect to the HDMI port. Connect the HDMI connector to the HDMI interface of the screen and the board.
    16 KB (2,475 words) - 08:23, 15 March 2024
  • ===Interface Options=== *A4 Network Interface Names: Switch the network card naming rules.
    22 KB (3,537 words) - 06:40, 2 September 2023
  • 1. <font color=red>Do not plug and unplug any device except USB and HDMI while the baseboard is working.</font><br> ...USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.<br>
    13 KB (2,002 words) - 10:32, 25 March 2024
  • |caption=RP2040<br/>Micro SD, DVI, USB Type-C ...effective microcontroller board designed by Waveshare, with an onboard DVI interface, TF card slot, and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO he
    9 KB (1,318 words) - 01:30, 25 January 2024
  • ...a variety of peripheral interfaces such as USB connectors, Ethernet port, HDMI port, CSI, GPIO, I2C, and RS485 interfaces. Onboard M.2 B KEY slot with ada | HDMI 2.0/DP1.2 | EDP 1.4 | DSI (1 x 2) 2 simultaneous
    15 KB (2,395 words) - 08:03, 21 February 2024
  • ...he circular interface and do not need to use a jumper cap to short the J48 interface first. ...appearance and interface. It is suitable for users who do not require more interface resources. The core board of the Lite version also uses the Jetson Nano Mod
    23 KB (3,763 words) - 02:18, 23 December 2023
  • |interface3 = HDMI ...also be used as the power supply interface, but cannot be used as the OTG interface.<br />
    12 KB (2,000 words) - 10:15, 25 March 2024
  • *DSI interface, refresh rate up to 60Hz. # Connect the 7inch DSI LCD (C) (display hereafter) to the DSI interface of Raspberry Pi boards by 15PIN FPC cable.
    13 KB (1,978 words) - 06:03, 4 September 2023
  • *DSI interface, refresh rate up to 60Hz. 1. Use a 15PIN FPC cable to connect the display DSI interface to the DSI interface of the Raspberry Pi board.<br/>
    17 KB (2,631 words) - 01:20, 26 March 2024
  • *DSI interface, refresh rate up to 60Hz. ...IN FPC cable to connect the DSI interface of the display screen to the DSI interface of the Raspberry Pi board.<br>
    17 KB (2,720 words) - 06:46, 25 March 2024
  • *HDMI interface (support 4K*2K@60) *40PIN GPIO Interface
    18 KB (3,036 words) - 09:31, 4 January 2024
  • ...generation for multiple concurrent AI inference pipelines, with high-speed interface support for multiple sensors, it is an ideal solution for a new age of robo ...Orin NX 8GB/16GB DEV KIT provides rich peripheral interfaces such as M.2, HDMI, USB, etc., which is more convenient for users to realize the product perfo
    9 KB (1,332 words) - 10:11, 22 March 2024
  • *Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver. #Micro USB cable.
    8 KB (1,302 words) - 10:25, 27 February 2024
  • |caption=M.2 B KEY, CSI HDMI, USB 2.0, Ethernet, FAN, 4G, 5G ...h a UPS module, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allowing additional 4G / 5G wireless communication modules
    23 KB (3,628 words) - 08:41, 27 March 2024
  • | 16 GB eMMC 5.1 Flash / M.2 M KEY NVME SSD Interface 2 x Multimode DP 1.4/eDP 1.4/HDMI 2.0 <br />
    60 KB (9,448 words) - 06:50, 4 September 2023
  • | 16 GB eMMC 5.1 Flash / M.2 M KEY NVME SSD Interface 2 x Multimode DP 1.2/eDP 1.4/HDMI 2.0 <br />
    62 KB (9,955 words) - 01:32, 19 March 2024
  • ...ed by Waveshare based on the Jetson Xavier NX core board, whose peripheral interface, size, and thickness are almost the same as Jetson Xavier NX Developer Kit, | 16 GB eMMC 5.1 Flash / M.2 M KEY NVME Solid State Interface
    59 KB (9,368 words) - 08:31, 26 December 2023
  • ...he circular interface and do not need to use a jumper cap to short the J48 interface first. #USB data cable (Micro USB port, can transfer data)
    79 KB (12,683 words) - 09:15, 9 January 2024