Solar Power Manager
| ||
Introduction
Solar Power Management Module, for 6V~24V Solar Panel
CAUTION: DO NOT put any non-rechargeable battery, like dry cell, into the battery holder. Serious consequences including explosion may occur if you try to charge a non-rechargeable battery.
Specification
|
Type |
||
|---|---|---|
|
Voltage of solar panel |
6V ~ 24V |
6V ~ 24V (Default setting: 18V) |
|
Chargers |
Solar panel, Power adapter, USB | |
|
USB charge interface |
Micro USB: 5V/1A |
Type-C：5V/2A; Support fast charge mode (PD/QC/FCP/PE/SFCP, etc. protocol); Support discharge |
|
Internal Li-battery |
3.7V 14500 Li-battery |
3.7V 10000mAh high-capacity Li-battery |
|
USB input voltage |
5V (Micro USB interface) |
5V (TYPE-C interface, support PD fast charge protocol) |
|
5V output |
5V / 1A (USB OUT、GPIO) |
5V / 3A (USB-OUT、TYPE-C) |
|
Charge cut-off voltage protection |
4.2V ± 1％ | |
|
Overdischarge protection voltage |
2.9V ± 1％ | |
|
Solar panel charge efficiency |
About 78% | |
|
USB charge efficiency |
About 82% |
About 93% |
|
3.7V battery boost output efficiency |
About 86% |
About 92% |
|
Max quiescent current |
<2mA | |
|
Enclosure |
No |
Metal case |
|
Operating temperature |
-40℃ ~ 85℃ | |
|
Dimension |
65.2 × 56.2 × 22.9mm |
108.0 × 71.0 × 25.2mm |
Resources
Support
If you require technical support, please go to the Support page and open a ticket.