Difference between revisions of "Solar Power Manager"
(3 intermediate revisions by the same user not shown) | |||
Line 10: | Line 10: | ||
}} | }} | ||
== Introduction == | == Introduction == | ||
− | Solar Power Management Module, for 6V~24V Solar Panel | + | Solar Power Management Module, for 6V~24V Solar Panel <br /> |
− | + | <font color="red">CAUTION: DO NOT put any non-rechargeable battery, like dry cell, into the battery holder. Serious consequences including explosion may occur if you try to charge a non-rechargeable battery.</font> | |
+ | ===Specification=== | ||
+ | {| class="list table table-striped table-bordered" | ||
+ | |- | ||
+ | ! | ||
+ | Type | ||
+ | ! | ||
+ | [[Solar Power Manager]] | ||
+ | ! | ||
+ | [[Solar Power Manager (B)]] | ||
+ | |- | ||
+ | ! | ||
+ | Voltage of solar panel<br/>(SOLAR IN) | ||
+ | | | ||
+ | 6V ~ 24V | ||
+ | | | ||
+ | 6V ~ 24V (Default setting: 18V) | ||
+ | |- | ||
+ | ! | ||
+ | Chargers | ||
+ | | colspan="2" | | ||
+ | Solar panel, Power adapter, USB | ||
+ | |- | ||
+ | ! | ||
+ | USB charge interface | ||
+ | | | ||
+ | Micro USB: 5V/1A | ||
+ | | | ||
+ | Type-C:5V/2A; Support fast charge mode (PD/QC/FCP/PE/SFCP, etc. protocol); Support discharge | ||
+ | |- | ||
+ | ! | ||
+ | Internal Li-battery | ||
+ | | | ||
+ | 3.7V 14500 Li-battery | ||
+ | | | ||
+ | 3.7V 10000mAh high-capacity Li-battery | ||
+ | |- | ||
+ | ! | ||
+ | USB input voltage | ||
+ | | | ||
+ | 5V (Micro USB interface) | ||
+ | | | ||
+ | 5V (TYPE-C interface, support PD fast charge protocol) | ||
+ | |- | ||
+ | ! | ||
+ | 5V output | ||
+ | | | ||
+ | 5V / 1A (USB OUT、GPIO) | ||
+ | | | ||
+ | 5V / 3A (USB-OUT、TYPE-C) | ||
+ | |- | ||
+ | ! | ||
+ | Charge cut-off voltage protection | ||
+ | | colspan="2" | | ||
+ | 4.2V ± 1% | ||
+ | |- | ||
+ | ! | ||
+ | Overdischarge protection voltage | ||
+ | | colspan="2" | | ||
+ | 2.9V ± 1% | ||
+ | |- | ||
+ | ! | ||
+ | Solar panel charge efficiency | ||
+ | | colspan="2" | | ||
+ | About 78% | ||
+ | |- | ||
+ | ! | ||
+ | USB charge efficiency | ||
+ | | | ||
+ | About 82% | ||
+ | | | ||
+ | About 93% | ||
+ | |- | ||
+ | ! | ||
+ | 3.7V battery boost output efficiency | ||
+ | | | ||
+ | About 86% | ||
+ | | | ||
+ | About 92% | ||
+ | |- | ||
+ | ! | ||
+ | Max quiescent current | ||
+ | | colspan="2" | | ||
+ | <2mA | ||
+ | |- | ||
+ | ! | ||
+ | Enclosure | ||
+ | | | ||
+ | No | ||
+ | | | ||
+ | Metal case | ||
+ | |- | ||
+ | ! | ||
+ | Operating temperature | ||
+ | | colspan="2" | | ||
+ | -40℃ ~ 85℃ | ||
+ | |- | ||
+ | ! | ||
+ | Dimension | ||
+ | | | ||
+ | 65.2 × 56.2 × 22.9mm | ||
+ | | | ||
+ | 108.0 × 71.0 × 25.2mm | ||
+ | |} | ||
== Resources == | == Resources == |
Revision as of 07:45, 10 May 2021
| ||
Introduction
Solar Power Management Module, for 6V~24V Solar Panel
CAUTION: DO NOT put any non-rechargeable battery, like dry cell, into the battery holder. Serious consequences including explosion may occur if you try to charge a non-rechargeable battery.
Specification
Type |
||
---|---|---|
Voltage of solar panel |
6V ~ 24V |
6V ~ 24V (Default setting: 18V) |
Chargers |
Solar panel, Power adapter, USB | |
USB charge interface |
Micro USB: 5V/1A |
Type-C:5V/2A; Support fast charge mode (PD/QC/FCP/PE/SFCP, etc. protocol); Support discharge |
Internal Li-battery |
3.7V 14500 Li-battery |
3.7V 10000mAh high-capacity Li-battery |
USB input voltage |
5V (Micro USB interface) |
5V (TYPE-C interface, support PD fast charge protocol) |
5V output |
5V / 1A (USB OUT、GPIO) |
5V / 3A (USB-OUT、TYPE-C) |
Charge cut-off voltage protection |
4.2V ± 1% | |
Overdischarge protection voltage |
2.9V ± 1% | |
Solar panel charge efficiency |
About 78% | |
USB charge efficiency |
About 82% |
About 93% |
3.7V battery boost output efficiency |
About 86% |
About 92% |
Max quiescent current |
<2mA | |
Enclosure |
No |
Metal case |
Operating temperature |
-40℃ ~ 85℃ | |
Dimension |
65.2 × 56.2 × 22.9mm |
108.0 × 71.0 × 25.2mm |
Resources
Support
Support
If you require technical support, please go to the Support page and open a ticket.