STM32CubeMX Tutorial Series: Overview

From Waveshare Wiki
Revision as of 01:39, 25 August 2016 by Wiki Editorial Team (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Create a New Project

Open the STM32cubeMX software and click New Project.


Select the MCU of your development board in the MCU Filters list.


In this part, we select the STM32F103ZETx MCU as an example. Now a new project was created.

RCC Configuration

RCC (Reset and clock control) Configuration. Select Crystal/Ceranic Resonator as High Speed Clock (HSE). In this part, we select the STM32F103ZETx MCU as an example.


GPIO Configuration

Zoom in on the chip view and click the pin to set the GPIO mode. Because PF6, PF7, PF8 and PF9 are connected to LEDs, we set them to GPIO_Output. The yellow pins are currently in use by other function and the green pins are already setup by user.


Clock Configuration

Thanks to STM32CubeMX, the clock Configuration is initiative and easy. Click the "Clock Configuration" tab and you can se each peripheral clock at a glance. The HCLK of this chip is 72MHz, so we enter 72 for the HCLK and the frequency value for buses or peripheral clocks will be updated. (If RCC High Speed Clock is disabled, you cannot enter 72 as the max MHz here)


Configuration View


STM32CubeMX Configuration window gives an overview of all the software configurable components. They are:

  • Multimedia: Media, LCD
  • Control: Timer
  • Analog: DAC、ADC
  • Connectivity: UART, SPI, I2C, USB, ETH
  • System: DMA, GPIO, NVIC, RCC, Watchdog
  • middlewares: FreeRTOS, FATFS, LwIP, USB

In this project, we wont't use DMA so ignore it. Click GPIO in the Configuration pane to open the GPIO configuration window that allows configuring the GPIO pin settings.

  • GPIO Pin level: Low
  • GPIO mode: Output Push Pull
  • Maximum output speed: Low
  • User Label: LEDn

User Label changes the default name into a user defined name. The Chip view (Pinout tab) is updated accordingly.


Power Consumption Calculator

For an ever-growing number of embedded systems applications, power consumption is a major concern. To help minimizing it, STM32CubeMX offers the Power Consumption Calculator (PCC) tab. Skip. STM32CubeMX offers the Power Consumption Calculator to help minimizing power consumption. Skip this tap.


Generate Project Report

Reports can be generated at any time during the configuration. Click Project > Generate Reports to generate .pdf and .txt reports. The reports summarize all the settings and MCU configuration performed for the project. Project Settings window prompts at the first time generate a report.

You can open the Project Settings window by selecting Project > Settings from the STM32CubeMX menu bar.


Enter the project name and specify the Project Location. Select your most commonly used IDE (e.g. MDK-ARM V5) and keep the Heap and Stack settings as default. Click the Code Generator tab and check "Generated peripheral initialization as a pair of '.c/.h' files per IP"


Generate Project Code

You can get the source code by selecting Project > Generate Code. After the code generated, click Open Project button to open the project in the IDE you specified.


Here the MDK was specified as the IDE.


Build the project and we will analyse the C code.

C code Analysis

Open gpio.c file and we find the function MX_GPIO_Init(). This initiates the LED pins. It is defined in gpio.c

We will find the GPIO operation functions on the stm32f1xx_hal_gpio.h file. Add these to the main block:

HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin);
HAL_Delay(100);    // 100ms
HAL_GPIO_TogglePin(LED2_GPIO_Port, LED2_Pin);
HAL_Delay(100);    // 100ms
HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin);
HAL_Delay(100);    // 100ms
HAL_GPIO_TogglePin(LED4_GPIO_Port, LED4_Pin);
HAL_Delay(100);    // 100ms

Rebuild the project and download it to the development board. Target configurations are often required. Click Options for Target and select Debug tap, then choose the Debugger accordingly. (Here is ST-Link)


Select Settings > Flash Download and check "Reset and Run"


After program downloaded, LEDs will blink one by one.

Last, the STM32CubeMX tool offers a firmware library. Users can call the functions to accelerate development. And your code may well be consistent with the full range of STM32 MCU code. The STM32CubeMx also provides a graphical view for the GPIO, peripherals, clock and so on, fast generating C code for initialization.

Then following lessons explain how to operating peripherals with the Open746I-C Development board. It may help you to get started with STM32CubeMx.