STLINK-V3MINI
From Waveshare Wiki
Revision as of 11:18, 27 April 2020 by Waveshare-eng11 (talk | contribs) (Created page with "{{Infobox item |img=300px|STLINK-V3MINI|link=https://www.waveshare.com/stlink-v3mini.htm |caption=STLINK-V3MINI |brand=ST |{{#urlget:amazon|defaul...")
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| ||
Introduction
The STLINK-V3MINI is stand-alone debugging and programming mini probe for STM32 microcontrollers.
The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.
The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.
The STLINK-V3MINI is a portable version, easy-to-use debugger/programmer including STDC14 interface with its flat cable.
| More |
User guide
Supports devices
All products of STM32 series which has JTAG/SWD interface
Hardware connection
- Connect STLINK-V3MINI to host PC
- Connect micro USB interface of STLINK-V3MINI, generally, it driver will be auto installed by ST-Link tool.
- You can check the programmer is recognized by PC
- Sometimes, the driver may not be installed properly, you can also install it manually.
- Download it from the #Resources
- Right-click ST-Link Debug, and ST-Link VCP Ctrl to update the driver.
- Connect the programmer to the target board
- Connect the STLINK-V3MINI to JTAG/SWD interface of STM32 board by adapter boards
Software setting
- Connect the programmer to the target board and power on it. If all the connections are normally, you can read the information of the target board
- Then you can compile and program target board by the STLINK-V3MINI
Resources
Support
Support
If you require technical support, please go to the Support page and open a ticket.