Difference between revisions of "SIM7600E-H 4G HAT"

From Waveshare Wiki
Jump to: navigation, search
(Application Note)
 
(30 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
+
{{DISPLAYTITLE:SIM7600CE-T/E-H/A-H/SA-H/G-H 4G Modules}}
{{Infobox item|colorscheme=blue
+
{{Infobox item|
 
|name=[[SIM7600E-H 4G HAT]]
 
|name=[[SIM7600E-H 4G HAT]]
|name2=[[SIM7600A-H 4G HAT]]
+
|name2=[[SIM7600E LTE Cat-1 HAT]]
|name3=[[SIM7600G-H 4G HAT]]
+
|name3=[[SIM7600A-H 4G HAT]]
 +
|name4=[[SIM7600SA-H 4G HAT]]
 +
|name5=[[SIM7600G-H 4G HAT]]
 +
|name6=[[SIM7600G-H 4G for Jetson Nano]]
 
|brief=mainly applicable in Southeast Asia, West Asia, Europe, Africa
 
|brief=mainly applicable in Southeast Asia, West Asia, Europe, Africa
|brief2=mainly applicable in North America (US, CA)
+
|brief2=mainly applicable in Southeast Asia, West Asia, Europe, Africa
|brief3=the global version
+
|brief3=mainly applicable in North America (US, CA)
 +
|brief4=mainly applicable in Australia, New Zealand, Taiwan, Latin America
 +
|brief5=the global version for Pi
 +
|brief6=the global version for Jetson Nano
 
|img=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600E-H-4G-hat.htm]]
 
|img=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600E-H-4G-hat.htm]]
|img2=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600A-H-4G-hat.htm]]
+
|img2=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/sim7600e-lte-cat-1-hat.htm]]
|img3=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600G-H-4G-hat.htm]]
+
|img3=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600A-H-4G-hat.htm]]
 +
|img4=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600SA-H-4G-hat.htm]]
 +
|img5=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600G-H-4G-hat.htm]]
 +
|img6=[[File:SIM7600G-H-4G-for-Jetson-Nano-1.jpg|300px|link=https://www.waveshare.com/sim7600g-h-4g-for-jetson-nano.htm]]
 
|platform=4G
 
|platform=4G
 
|category=[[:Category:Modules|Modules]], [[:Category:4G|4G]], [[:Category:GPS/GSM|GPS/GSM]], [[:Category:Raspberry Pi|Raspberry Pi]]
 
|category=[[:Category:Modules|Modules]], [[:Category:4G|4G]], [[:Category:GPS/GSM|GPS/GSM]], [[:Category:Raspberry Pi|Raspberry Pi]]
Line 22: Line 31:
 
{{Product List|Modules/Wireless Communication/GPS / GSM}}
 
{{Product List|Modules/Wireless Communication/GPS / GSM}}
 
}}
 
}}
 
+
<div class="tabber">
 +
<div class="tabbertab" title="Instruction">
 
== Introduction ==
 
== Introduction ==
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600E-H
+
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600X-H
 
{{Amazon|{{#urlget:amazon|default}}=display
 
{{Amazon|{{#urlget:amazon|default}}=display
 
|More = [http://www.waveshare.com/SIM7600E-H-4G-HAT.htm More]}}
 
|More = [http://www.waveshare.com/SIM7600E-H-4G-HAT.htm More]}}
<!-- {{SIM7600E-H 4G HAT User Manual}}
+
<!-- {{SIM7600E-H 4G HAT User Manual}}-->
{{SIM7600E-H 4G HAT User Manual}}-->
+
{{SIM7600X 4G HAT User Manual}}
 
+
</div>
 +
<div class="tabbertab" title="Resources">
 
== Resources ==
 
== Resources ==
 
*[[:File:SIM7600E-H-4G-HAT-Manual-EN.pdf|Manual]]
 
*[[:File:SIM7600E-H-4G-HAT-Manual-EN.pdf|Manual]]
*[[:File:SIM7600E-H-4G-HAT-Schematic.pdf|Schematic]]
+
*[[:File:SIM7600E-H-4G-HAT-Schematic.pdf|SIM7600X 4G HAT Schematic]]
 +
*[[:File:SIM7600G-H-4G-for-Jetson-Nano-Schematic.pdf|SIM7600X 4G for Jetson Nano Schematic]]
 
*[[:File:SIM7600X-4G-HAT-Demo.7z| Source code]]
 
*[[:File:SIM7600X-4G-HAT-Demo.7z| Source code]]
 
*[[:File:SIM7X00-Driver.7z | SIM7600 Driver]]
 
*[[:File:SIM7X00-Driver.7z | SIM7600 Driver]]
 
*[[:File:SIM7600-size.png | Dimensions]]
 
*[[:File:SIM7600-size.png | Dimensions]]
 
*[[:File:SIM7600 3D Drawing.zip|3D Drawing]]
 
*[[:File:SIM7600 3D Drawing.zip|3D Drawing]]
 +
 +
== comparison ==
 +
[[File:cat4-comparison.png|800px]]
  
 
==Related Instruction==
 
==Related Instruction==
 +
*[[Raspberry Pi networked via RNDIS]]
 +
*[[Raspberry Pi networked via NDIS]]
 
*[[SIM868 PPP Dail-up Networking]]
 
*[[SIM868 PPP Dail-up Networking]]
 
*[[:File:gprs.7z|gprs]]
 
*[[:File:gprs.7z|gprs]]
*[https://www.raspberrypi.org/forums/viewtopic.php?p=1374909#p1450784 Setup wwan0 interface for 4G network]
+
*[[:File:SIM7600X-Raspberry-Pi-GPS.mp4|GPS positioning under Raspberry Pi]]
  
 
== Tools ==
 
== Tools ==
Line 53: Line 70:
 
*[[:File:SIM7600G-H_SPEC EN_20190731.pdf | SIM7600G-H SPEC]]
 
*[[:File:SIM7600G-H_SPEC EN_20190731.pdf | SIM7600G-H SPEC]]
 
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.08.pdf | AT Command Manual_V1.08]]
 
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.08.pdf | AT Command Manual_V1.08]]
 +
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.12.pdf | SIM7500_SIM7600 Series_AT Command Manual_V1.12]]
  
 
=== Application Note ===
 
=== Application Note ===
Line 58: Line 76:
 
*[[:File:SIM7X00 Series_SAT_Application Note_V1.00.pdf|SIM7X00 Series_SAT_Application Note]]
 
*[[:File:SIM7X00 Series_SAT_Application Note_V1.00.pdf|SIM7X00 Series_SAT_Application Note]]
 
*[[:File:SIM7X00 Series_SMS_Application Note_V1.00.pdf|SIM7X00 Series_SMS_Application Note]]
 
*[[:File:SIM7X00 Series_SMS_Application Note_V1.00.pdf|SIM7X00 Series_SMS_Application Note]]
 +
*[[:File:AN_SMS_V1.01.pdf|SMS Application notes]]
 
*[[:File:SIM7X00 Series_TCPIP_Application Note_V1.00.pdf|SIM7X00 Series_TCPIP_Application Note]]
 
*[[:File:SIM7X00 Series_TCPIP_Application Note_V1.00.pdf|SIM7X00 Series_TCPIP_Application Note]]
 
*[[:File:SIM7500_SIM7600_SIM7800 Series_HTTP_AT Command Manual_V1.00.pdf|SIM7600 Series_HTTP_AT Command Manual]]
 
*[[:File:SIM7500_SIM7600_SIM7800 Series_HTTP_AT Command Manual_V1.00.pdf|SIM7600 Series_HTTP_AT Command Manual]]
Line 76: Line 95:
 
*[[:File:SIM7600G_SIM7600G-H_Hardware Design_V1.00.pdf | SIM7600G-H Hardware Design]]
 
*[[:File:SIM7600G_SIM7600G-H_Hardware Design_V1.00.pdf | SIM7600G-H Hardware Design]]
  
===Firmware===
+
<!--===Firmware===
 
*[[:File:LE11B08SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B08SIM7600M22 Firmware]]
 
*[[:File:LE11B08SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B08SIM7600M22 Firmware]]
 
*[[:File:LE11B09SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B09SIM7600M22 Firmware]]
 
*[[:File:LE11B09SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B09SIM7600M22 Firmware]]
 
*[[:File:LE11B10SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B10SIM7600M22 Firmware]]
 
*[[:File:LE11B10SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B10SIM7600M22 Firmware]]
 
*[[:File:LE11B12SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B12SIM7600M22 Firmware]]
 
*[[:File:LE11B12SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B12SIM7600M22 Firmware]]
<!--*[[:File:LE11B04SIM7500A.rar|SIM7600A-H Serial B04 Firmware]]-->
+
*[[:File:LE11B13SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B13SIM7600M22 Firmware]]
 
*[[:File:LE11B03SIM7600A-H.rar|SIM7600A-H LE11B03SIM7600A-H Firmware]]
 
*[[:File:LE11B03SIM7600A-H.rar|SIM7600A-H LE11B03SIM7600A-H Firmware]]
 +
*[[:File:LE20B02SIM7600M22.rar|SIM7600G-H LE20B02SIM7600M22 Firmware]]
 
*[[:File:SIM7500_SIM7600_QDL V1.41 Only for Update.rar|Upgrade tools]]
 
*[[:File:SIM7500_SIM7600_QDL V1.41 Only for Update.rar|Upgrade tools]]
 
*[[:File:SIM7600 Series Firmware Upgrading User Guide.pdf|Firmware Upgrading User Guide]]
 
*[[:File:SIM7600 Series Firmware Upgrading User Guide.pdf|Firmware Upgrading User Guide]]
 
*[[:File:SIM7600-firmware-upgrade.mp4|SIM7600-firmware-upgrade.mp4]]
 
*[[:File:SIM7600-firmware-upgrade.mp4|SIM7600-firmware-upgrade.mp4]]
 +
*[[:File:SIM7080 SIM7500 SIM7600 SIM7900 SIM8200 QDL V1.54 Only for Update.rar]]
  
 +
-->
 
[http://www.simcom.com/product/371-en.html For More...]
 
[http://www.simcom.com/product/371-en.html For More...]
 
+
</div>
 +
<div class="tabbertab" title="FAQ">
 
== FAQ ==
 
== FAQ ==
  
 +
{{FAQ|NET light does not flicker after startup of SIM7600X, what should I do if the network is abnormal?
 +
|This situation may not be successfully connected to the network, you can follow the steps below:
 +
Firstly, check the hardware connection, check whether the antenna is properly connected, and check whether the +SIM card can be used to make normal calls and surf the Internet in mobile phones and other devices:
 +
After checking the hardware connection, the software can use these instructions:
 +
* Check whether the SIM card is in good contact: AT+CPIN?
 +
[[File:SIM7600X_test_1 (2).png|400px]]
 +
* Check if sim card is in good contact: AT+CNMP?
 +
[[File:SIM7600X_test_1 (1).png|400px]]
 +
* Check the signal quality of the current environment: AT+CSQ
 +
[[File:SIM7600X_test_1 (3).png|400px]]
 +
* Check operator access status: AT+COPS?
 +
[[File:SIM7600X_test_1 (4).png|400px]]
 +
* Check networking status: AT+CPSI?
 +
[[File:SIM7600X_test_1 (5).png|400px]]
 +
* Check that you have successfully registered to the network: AT+CREG?
 +
[[File:SIM7600X_test_1 (6).png|400px]]
 +
 +
}}
 +
</div>
 +
<div class="tabbertab" title="Supports">
 
{{Service00}}
 
{{Service00}}
 +
</div>
 
[[Category:Modules]][[Category:4G| ]][[Category:GPS/GSM| ]]
 
[[Category:Modules]][[Category:4G| ]][[Category:GPS/GSM| ]]

Latest revision as of 07:28, 24 December 2020

SIM7600E-H 4G HAT
mainly applicable in Southeast Asia, West Asia, Europe, Africa
SIM7600E-H.jpg
SIM7600E LTE Cat-1 HAT
mainly applicable in Southeast Asia, West Asia, Europe, Africa
SIM7600E-H.jpg
SIM7600A-H 4G HAT
mainly applicable in North America (US, CA)
SIM7600E-H.jpg
SIM7600SA-H 4G HAT
mainly applicable in Australia, New Zealand, Taiwan, Latin America
SIM7600E-H.jpg
SIM7600G-H 4G HAT
the global version for Pi
SIM7600E-H.jpg
Primary Attribute
Category: Modules, 4G, GPS/GSM, Raspberry Pi
{{{userDefinedInfo}}}: {{{userdefinedvalue}}}
Brand: Waveshare
Website
English: Waveshare website
Chinese: 官方中文站点
Onboard Interfaces
RPi UART
Related Products

Introduction

4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600X-H

More

Features

  • 40PIN GPIO extension header for connecting Jetson Nano
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • Onboard 3.5mm audio jack with earphone and mic support, for making telephone calls
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, the operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT

Testing

  • Insert the SIM card and earphone to the SIM7600X board, if you want to test the TF card slot, you can also insert a TF card to the card slot.
  • Connect the USB interface of SIM7600X board to PC.
Sim7600CE-1.jpgSim7600CE-2.jpg
  • The PWR indicator turns on after connecting
  • Long-press the PWR button for 1, the NET LED turns on and became flashing after 10s. (If the NET indicator keeps solid, please check if the SIM card is workable)
  • Check the Device Manager of PC, the several COM ports will be recognized:
Sim7600CE-3.jpg
  • If the COM ports are recognized with an exclamation symbol, you should install the driver manually.
  • Connect the DONGLE to Windows PC (Hereafter we use Windows 10 PC as example))
  • Open Device Manager—>Other Devices—>“SimTech, Incorporated”—>Update driver—>Browse my compute for driver software—>Choose the driver according to your OS—>Install it
  • After installation, all the devices should be recognized normally as below:

SIM7600X-Driver-8.jpg
【Note】If you want to let the module power on automatically after booting, you can just connect PWR pin to GND and connect P7 pin to GND.

SIM7600X-auto-turn-on.png

【Note】Reference of indicators

NETLIGHT.png

AT commands for testing

AT Command Description Return
ATE ATE1: Echo mode on
ATE0: Echo mode off
OK
AT+CGMI Request manufacturer indentification OK
AT+CGMM Request model indentification OK
AT+CGSN Request product serial number identification OK
AT+CSUB Request porduct version OK
AT+CGMR Request firmware version OK
AT+IPREX Configure buad rate of model +IPREX:OK
AT+CRESET Reset model OK
AT+CSQ Query signal quality OK
AT+CPIN? Query SIM card status +CPIN:RRADY
AT+COPS? Query provider information +COPS:OK
AT+CREG? Query network registation status +CREG: OK
AT+CPSI? Query UE system information
AT+CNMP Select Network Mode:

2: Automatic
13: GSM only
38: LTE only
48: Any modes but LTE <nr /> ....

OK

For more information about the AT command, you can refer to AT command manual

Sim7600CE-4.png

Make calls and answer

  • Insert the SIM card, connect the LTE antenna and connect the USB interface of SIM7600E-H 4G HAT to PC, Then press the PWRKEY to power on the boardl
  • Check whether the indicators blink correctly (PWR's and NET's flashes)
  • Send AT commands as bellow:
Commands Description Return
AT+CNUM Phone number (only supported by some SIM cards) +CNUM OK
AT+CSDVC AT+CSDVC=1: Handset output
AT+CSDVC=3: Speaker output
OK
AT+CLVL=? Check volume level OK
AT+CLVL=2 Volume level set to 2 OK
ATD<phone_number>; Make calls OK
AT+CHUP Hang up call OK
AT+CLIP=1 Phone ring OK
ATA Answer call OK
Sim7600CE-5.png

FAQ

Question:
NET light does not flicker after startup of SIM7600X, what should I do if the network is abnormal?
Answer:
This situation may not be successfully connected to the network, you can follow the steps below:

Firstly, check the hardware connection, check whether the antenna is properly connected, and check whether the +SIM card can be used to make normal calls and surf the Internet in mobile phones and other devices: After checking the hardware connection, the software can use these instructions:

  • Check whether the SIM card is in good contact: AT+CPIN?

SIM7600X test 1 (2).png

  • Check if sim card is in good contact: AT+CNMP?

SIM7600X test 1 (1).png

  • Check the signal quality of the current environment: AT+CSQ

SIM7600X test 1 (3).png

  • Check operator access status: AT+COPS?

SIM7600X test 1 (4).png

  • Check networking status: AT+CPSI?

SIM7600X test 1 (5).png

  • Check that you have successfully registered to the network: AT+CREG?

SIM7600X test 1 (6).png




Please contact us by Email/Skype/WeChat for technology support.Our response may be delay, you can just leave your questions, we will reply to you as soon as possible in working time.

Service email.png [email protected]
Service skype.png [email protected]
Service wechat.png Webchat Linzeru.png
Service time.png 09:00 - 18:00 (UTC+8 Monday to Staturday)