Difference between revisions of "SIM7600E-H 4G HAT"

From Waveshare Wiki
Jump to: navigation, search
(34 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
+
{{DISPLAYTITLE:SIM7600CE-T/E-H/A-H/SA-H/G-H 4G Modules}}
{{Infobox item|colorscheme=blue
+
{{Infobox item|
 
|name=[[SIM7600E-H 4G HAT]]
 
|name=[[SIM7600E-H 4G HAT]]
|brief=Compatible with Raspberry Pi 2B/3B/Zero/Zero W
+
|name2=[[SIM7600E LTE Cat-1 HAT]]
 +
|name3=[[SIM7600A-H 4G HAT]]
 +
|name4=[[SIM7600SA-H 4G HAT]]
 +
|name5=[[SIM7600G-H 4G HAT]]
 +
|name6=[[SIM7600G-H 4G for Jetson Nano]]
 +
|brief=mainly applicable in Southeast Asia, West Asia, Europe, Africa
 +
|brief2=mainly applicable in Southeast Asia, West Asia, Europe, Africa
 +
|brief3=mainly applicable in North America (US, CA)
 +
|brief4=mainly applicable in Australia, New Zealand, Taiwan, Latin America
 +
|brief5=the global version for Pi
 +
|brief6=the global version for Jetson Nano
 
|img=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600E-H-4G-hat.htm]]
 
|img=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600E-H-4G-hat.htm]]
 +
|img2=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/sim7600e-lte-cat-1-hat.htm]]
 +
|img3=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600A-H-4G-hat.htm]]
 +
|img4=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600SA-H-4G-hat.htm]]
 +
|img5=[[File:SIM7600E-H.jpg|300px|link=http://www.waveshare.com/SIM7600G-H-4G-hat.htm]]
 +
|img6=[[File:SIM7600G-H-4G-for-Jetson-Nano-1.jpg|300px|link=https://www.waveshare.com/sim7600g-h-4g-for-jetson-nano.htm]]
 
|platform=4G
 
|platform=4G
 
|category=[[:Category:Modules|Modules]], [[:Category:4G|4G]], [[:Category:GPS/GSM|GPS/GSM]], [[:Category:Raspberry Pi|Raspberry Pi]]
 
|category=[[:Category:Modules|Modules]], [[:Category:4G|4G]], [[:Category:GPS/GSM|GPS/GSM]], [[:Category:Raspberry Pi|Raspberry Pi]]
Line 16: Line 31:
 
{{Product List|Modules/Wireless Communication/GPS / GSM}}
 
{{Product List|Modules/Wireless Communication/GPS / GSM}}
 
}}
 
}}
 
+
<div class="tabber">
 +
<div class="tabbertab" title="Instruction">
 
== Introduction ==
 
== Introduction ==
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600E-H
+
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600X-H
 
{{Amazon|{{#urlget:amazon|default}}=display
 
{{Amazon|{{#urlget:amazon|default}}=display
 
|More = [http://www.waveshare.com/SIM7600E-H-4G-HAT.htm More]}}
 
|More = [http://www.waveshare.com/SIM7600E-H-4G-HAT.htm More]}}
<!-- {{SIM7600E-H 4G HAT User Manual}}
+
<!-- {{SIM7600E-H 4G HAT User Manual}}-->
{{SIM7600E-H 4G HAT User Manual}}-->
+
{{SIM7600X 4G HAT User Manual}}
 
+
</div>
 +
<div class="tabbertab" title="Resources">
 
== Resources ==
 
== Resources ==
 
*[[:File:SIM7600E-H-4G-HAT-Manual-EN.pdf|Manual]]
 
*[[:File:SIM7600E-H-4G-HAT-Manual-EN.pdf|Manual]]
*[[:File:SIM7600E-H-4G-HAT-Schematic.pdf|Schematic]]
+
*[[:File:SIM7600E-H-4G-HAT-Schematic.pdf|SIM7600X 4G HAT Schematic]]
 +
*[[:File:SIM7600G-H-4G-for-Jetson-Nano-Schematic.pdf|SIM7600X 4G for Jetson Nano Schematic]]
 
*[[:File:SIM7600X-4G-HAT-Demo.7z| Source code]]
 
*[[:File:SIM7600X-4G-HAT-Demo.7z| Source code]]
 
*[[:File:SIM7X00-Driver.7z | SIM7600 Driver]]
 
*[[:File:SIM7X00-Driver.7z | SIM7600 Driver]]
 
*[[:File:SIM7600-size.png | Dimensions]]
 
*[[:File:SIM7600-size.png | Dimensions]]
 
*[[:File:SIM7600 3D Drawing.zip|3D Drawing]]
 
*[[:File:SIM7600 3D Drawing.zip|3D Drawing]]
 +
 +
== comparison ==
 +
[[File:cat4-comparison.png|800px]]
  
 
==Related Instruction==
 
==Related Instruction==
 +
*[[Raspberry Pi networked via RNDIS]]
 +
*[[Raspberry Pi networked via NDIS]]
 
*[[SIM868 PPP Dail-up Networking]]
 
*[[SIM868 PPP Dail-up Networking]]
 
*[[:File:gprs.7z|gprs]]
 
*[[:File:gprs.7z|gprs]]
*[https://www.raspberrypi.org/forums/viewtopic.php?p=1374909#p1450784 Setup wwan0 interface for 4G network]
+
*[[:File:SIM7600X-Raspberry-Pi-GPS.mp4|GPS positioning under Raspberry Pi]]
  
 
== Tools ==
 
== Tools ==
 
*[[:File:SIM7600-AT-SSCOM-EN.7z|sscom (with sim7600 AT commands)]]
 
*[[:File:SIM7600-AT-SSCOM-EN.7z|sscom (with sim7600 AT commands)]]
*[[:File:U-center GPS.zip|U-center GPS]]
 
 
*[[:File:SIMCom GPS DEMO.7z|SIMCom GPS]]
 
*[[:File:SIMCom GPS DEMO.7z|SIMCom GPS]]
 
*[[:File:NetAssist.7z|NetAssist]]
 
*[[:File:NetAssist.7z|NetAssist]]
 
  
 
== SIM7600 Related ==
 
== SIM7600 Related ==
Line 49: Line 70:
 
*[[:File:SIM7600G-H_SPEC EN_20190731.pdf | SIM7600G-H SPEC]]
 
*[[:File:SIM7600G-H_SPEC EN_20190731.pdf | SIM7600G-H SPEC]]
 
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.08.pdf | AT Command Manual_V1.08]]
 
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.08.pdf | AT Command Manual_V1.08]]
 +
*[[:File:SIM7500_SIM7600 Series_AT Command Manual_V1.12.pdf | SIM7500_SIM7600 Series_AT Command Manual_V1.12]]
  
 
=== Application Note ===
 
=== Application Note ===
Line 54: Line 76:
 
*[[:File:SIM7X00 Series_SAT_Application Note_V1.00.pdf|SIM7X00 Series_SAT_Application Note]]
 
*[[:File:SIM7X00 Series_SAT_Application Note_V1.00.pdf|SIM7X00 Series_SAT_Application Note]]
 
*[[:File:SIM7X00 Series_SMS_Application Note_V1.00.pdf|SIM7X00 Series_SMS_Application Note]]
 
*[[:File:SIM7X00 Series_SMS_Application Note_V1.00.pdf|SIM7X00 Series_SMS_Application Note]]
 +
*[[:File:AN_SMS_V1.01.pdf|SMS Application notes]]
 
*[[:File:SIM7X00 Series_TCPIP_Application Note_V1.00.pdf|SIM7X00 Series_TCPIP_Application Note]]
 
*[[:File:SIM7X00 Series_TCPIP_Application Note_V1.00.pdf|SIM7X00 Series_TCPIP_Application Note]]
 
*[[:File:SIM7500_SIM7600_SIM7800 Series_HTTP_AT Command Manual_V1.00.pdf|SIM7600 Series_HTTP_AT Command Manual]]
 
*[[:File:SIM7500_SIM7600_SIM7800 Series_HTTP_AT Command Manual_V1.00.pdf|SIM7600 Series_HTTP_AT Command Manual]]
Line 66: Line 89:
 
*[[:File:SIM7100_SIM7500_SIM7600 Series_USB AUDIO_Application Note_V1.03.pdf | SIM7600 Series_USB AUDIO_Application Note]]
 
*[[:File:SIM7100_SIM7500_SIM7600 Series_USB AUDIO_Application Note_V1.03.pdf | SIM7600 Series_USB AUDIO_Application Note]]
 
*[[:File:SIM7100_SIM7500_SIM7600 Series_UIM HOT SWAP_Application Note_V1.01.pdf | SIM7600 Series_UIM HOT SWAP_Application Note]]
 
*[[:File:SIM7100_SIM7500_SIM7600 Series_UIM HOT SWAP_Application Note_V1.01.pdf | SIM7600 Series_UIM HOT SWAP_Application Note]]
*[[:File:SIM7100_MMS_Application_Note_V0.01.pdf | MMS_Application_Note]]
 
 
*[[:File:SIM7100_SIM7600M22 Series_TTS_Application Note_V1.02.pdf | SIM7600M22 Series_TTS_Application Note]]
 
*[[:File:SIM7100_SIM7600M22 Series_TTS_Application Note_V1.02.pdf | SIM7600M22 Series_TTS_Application Note]]
 
<!--*[[:File:SIM7600M22_MIFI_Application Note_V1.00.pdf | MIFI_Application Note_V1.00]]-->
 
<!--*[[:File:SIM7600M22_MIFI_Application Note_V1.00.pdf | MIFI_Application Note_V1.00]]-->
Line 73: Line 95:
 
*[[:File:SIM7600G_SIM7600G-H_Hardware Design_V1.00.pdf | SIM7600G-H Hardware Design]]
 
*[[:File:SIM7600G_SIM7600G-H_Hardware Design_V1.00.pdf | SIM7600G-H Hardware Design]]
  
===Firmware===
+
<!--===Firmware===
 
*[[:File:LE11B08SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B08SIM7600M22 Firmware]]
 
*[[:File:LE11B08SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B08SIM7600M22 Firmware]]
 
*[[:File:LE11B09SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B09SIM7600M22 Firmware]]
 
*[[:File:LE11B09SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B09SIM7600M22 Firmware]]
 
*[[:File:LE11B10SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B10SIM7600M22 Firmware]]
 
*[[:File:LE11B10SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B10SIM7600M22 Firmware]]
 
*[[:File:LE11B12SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B12SIM7600M22 Firmware]]
 
*[[:File:LE11B12SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B12SIM7600M22 Firmware]]
<!--*[[:File:LE11B04SIM7500A.rar|SIM7600A-H Serial B04 Firmware]]-->
+
*[[:File:LE11B13SIM7600M22.rar|SIM7600E-H&SIM7600CE-T LE11B13SIM7600M22 Firmware]]
 
*[[:File:LE11B03SIM7600A-H.rar|SIM7600A-H LE11B03SIM7600A-H Firmware]]
 
*[[:File:LE11B03SIM7600A-H.rar|SIM7600A-H LE11B03SIM7600A-H Firmware]]
 +
*[[:File:LE20B02SIM7600M22.rar|SIM7600G-H LE20B02SIM7600M22 Firmware]]
 
*[[:File:SIM7500_SIM7600_QDL V1.41 Only for Update.rar|Upgrade tools]]
 
*[[:File:SIM7500_SIM7600_QDL V1.41 Only for Update.rar|Upgrade tools]]
 
*[[:File:SIM7600 Series Firmware Upgrading User Guide.pdf|Firmware Upgrading User Guide]]
 
*[[:File:SIM7600 Series Firmware Upgrading User Guide.pdf|Firmware Upgrading User Guide]]
 
*[[:File:SIM7600-firmware-upgrade.mp4|SIM7600-firmware-upgrade.mp4]]
 
*[[:File:SIM7600-firmware-upgrade.mp4|SIM7600-firmware-upgrade.mp4]]
 +
*[[:File:SIM7080 SIM7500 SIM7600 SIM7900 SIM8200 QDL V1.54 Only for Update.rar]]
  
 +
-->
 +
[http://www.simcom.com/product/371-en.html For More...]
 +
</div>
 +
<div class="tabbertab" title="FAQ">
 
== FAQ ==
 
== FAQ ==
  
 +
{{FAQ|NET light does not flicker after startup of SIM7600X, what should I do if the network is abnormal?
 +
|This situation may not be successfully connected to the network, you can follow the steps below:
 +
Firstly, check the hardware connection, check whether the antenna is properly connected, and check whether the +SIM card can be used to make normal calls and surf the Internet in mobile phones and other devices:
 +
After checking the hardware connection, the software can use these instructions:
 +
* Check whether the SIM card is in good contact: AT+CPIN?
 +
[[File:SIM7600X_test_1 (2).png|400px]]
 +
* Check if sim card is in good contact: AT+CNMP?
 +
[[File:SIM7600X_test_1 (1).png|400px]]
 +
* Check the signal quality of the current environment: AT+CSQ
 +
[[File:SIM7600X_test_1 (3).png|400px]]
 +
* Check operator access status: AT+COPS?
 +
[[File:SIM7600X_test_1 (4).png|400px]]
 +
* Check networking status: AT+CPSI?
 +
[[File:SIM7600X_test_1 (5).png|400px]]
 +
* Check that you have successfully registered to the network: AT+CREG?
 +
[[File:SIM7600X_test_1 (6).png|400px]]
 +
 +
}}
 +
</div>
 +
<div class="tabbertab" title="Supports">
 
{{Service00}}
 
{{Service00}}
 +
</div>
 
[[Category:Modules]][[Category:4G| ]][[Category:GPS/GSM| ]]
 
[[Category:Modules]][[Category:4G| ]][[Category:GPS/GSM| ]]

Revision as of 07:28, 24 December 2020

SIM7600E-H 4G HAT
mainly applicable in Southeast Asia, West Asia, Europe, Africa
SIM7600E-H.jpg
SIM7600E LTE Cat-1 HAT
mainly applicable in Southeast Asia, West Asia, Europe, Africa
SIM7600E-H.jpg
SIM7600A-H 4G HAT
mainly applicable in North America (US, CA)
SIM7600E-H.jpg
SIM7600SA-H 4G HAT
mainly applicable in Australia, New Zealand, Taiwan, Latin America
SIM7600E-H.jpg
SIM7600G-H 4G HAT
the global version for Pi
SIM7600E-H.jpg

Introduction

4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600X-H

More

Features

  • 40PIN GPIO extension header for connecting Jetson Nano
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • Onboard 3.5mm audio jack with earphone and mic support, for making telephone calls
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, the operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT

Testing

  • Insert the SIM card and earphone to the SIM7600X board, if you want to test the TF card slot, you can also insert a TF card to the card slot.
  • Connect the USB interface of SIM7600X board to PC.
Sim7600CE-1.jpgSim7600CE-2.jpg
  • The PWR indicator turns on after connecting
  • Long-press the PWR button for 1, the NET LED turns on and became flashing after 10s. (If the NET indicator keeps solid, please check if the SIM card is workable)
  • Check the Device Manager of PC, the several COM ports will be recognized:
Sim7600CE-3.jpg
  • If the COM ports are recognized with an exclamation symbol, you should install the driver manually.
  • Connect the DONGLE to Windows PC (Hereafter we use Windows 10 PC as example))
  • Open Device Manager—>Other Devices—>“SimTech, Incorporated”—>Update driver—>Browse my compute for driver software—>Choose the driver according to your OS—>Install it
  • After installation, all the devices should be recognized normally as below:

SIM7600X-Driver-8.jpg
【Note】If you want to let the module power on automatically after booting, you can just connect PWR pin to GND and connect P7 pin to GND.

SIM7600X-auto-turn-on.png

【Note】Reference of indicators

NETLIGHT.png

AT commands for testing

AT Command Description Return
ATE ATE1: Echo mode on
ATE0: Echo mode off
OK
AT+CGMI Request manufacturer indentification OK
AT+CGMM Request model indentification OK
AT+CGSN Request product serial number identification OK
AT+CSUB Request porduct version OK
AT+CGMR Request firmware version OK
AT+IPREX Configure buad rate of model +IPREX:OK
AT+CRESET Reset model OK
AT+CSQ Query signal quality OK
AT+CPIN? Query SIM card status +CPIN:RRADY
AT+COPS? Query provider information +COPS:OK
AT+CREG? Query network registation status +CREG: OK
AT+CPSI? Query UE system information
AT+CNMP Select Network Mode:

2: Automatic
13: GSM only
38: LTE only
48: Any modes but LTE <nr /> ....

OK

For more information about the AT command, you can refer to AT command manual

Sim7600CE-4.png

Make calls and answer

  • Insert the SIM card, connect the LTE antenna and connect the USB interface of SIM7600E-H 4G HAT to PC, Then press the PWRKEY to power on the boardl
  • Check whether the indicators blink correctly (PWR's and NET's flashes)
  • Send AT commands as bellow:
Commands Description Return
AT+CNUM Phone number (only supported by some SIM cards) +CNUM OK
AT+CSDVC AT+CSDVC=1: Handset output
AT+CSDVC=3: Speaker output
OK
AT+CLVL=? Check volume level OK
AT+CLVL=2 Volume level set to 2 OK
ATD<phone_number>; Make calls OK
AT+CHUP Hang up call OK
AT+CLIP=1 Phone ring OK
ATA Answer call OK
Sim7600CE-5.png

Hardware Configration of the New Version

In the second half of 2021, the SIM7600 series boards will be switched to new versions for shipment. The old and new versions can be used normally and stably.Compared with the old version, the new version has the following changes:

SIM7600 NEW old-V2.jpg
  • 1) Newly added 330uF electrolytic capacitor (Stronger voltage stabilization ability)
  • 2) Newly added PWR and Flightmode pin jumpers (Automatic power-on function can be set, and the IO port can be customized to control the switch and Flight mode)
  • 3) Add solderable pads for VCCIO.(when used with Raspberry Pi, the SIM7600X 4G HAT is soldered at 3.3V working level by default; if you need to use 5V working-level MCU, you can change it to 5V by yourself)
  • 4) Add solderable pads for the module USB. (if you don’t want to use a USB adapter cable, you can solder them to the corresponding USB solder joints at the bottom of the Raspberry Pi through some flying cables. This operation should be used with caution by non-professionals)
  • 5) The power management IC was changed from MP1482 to SPX29302
  • 6) The silkscreen naming is changed from "WPI naming" to "BCM naming"
  • 7) Fine-tuning the layout
  • 8) Add new solder joints for module Boot to burn the firmware forcibly. Short-circuit the two pads can enter the forced firmware burning mode. (Only used when the firmware cannot be burned normally)

Description of turning on/off the HAT for New Version

  • In the new version, PWR and 3V3 are short-circuited by default, so the HAT turned on automatically after connecting to the power supply.
  • If you need to use the PWRKEY button to turn on/off the HAT, please remove the jumper cap between PWR and 3V3:
  • If you want to use the Raspberry Pi to turn on/off, please set the jumper cap between PWR and D6:
SIM7600X Power.png

Flight mode description of the New Version

  • The new version of the HAT doesn't turn on the Flight mode by default:
  • If you need to control the Flight mode through the Raspberry Pi pins, set the jumper cap between Flight and D4:
SIM7600X Flight.png

FAQ

 Answer:
This situation may not be successfully connected to the network, you can follow the steps below:

Firstly, check the hardware connection, check whether the antenna is properly connected, and check whether the +SIM card can be used to make normal calls and surf the Internet in mobile phones and other devices: After checking the hardware connection, the software can use these instructions:

  • Check whether the SIM card is in good contact: AT+CPIN?

SIM7600X test 1 (2).png

  • Check if sim card is in good contact: AT+CNMP?

SIM7600X test 1 (1).png

  • Check the signal quality of the current environment: AT+CSQ

SIM7600X test 1 (3).png

  • Check operator access status: AT+COPS?

SIM7600X test 1 (4).png

  • Check networking status: AT+CPSI?

SIM7600X test 1 (5).png

  • Check that you have successfully registered to the network: AT+CREG?

SIM7600X test 1 (6).png

{{{3}}}
{{{4}}}

{{{5}}}


Support

If you require technical support, please go to the Support page and open a ticket.