Raspberry Pi networked via RNDIS
From Waveshare Wiki
Revision as of 08:20, 29 July 2020 by Waveshare-admin (talk | contribs)
1、Send the following commands through minicom and wait for the module to restart
AT+CUSBPIDSWITCH=9011,1,1
2、Run the ifconfig command to see if a USB0 card is identified
ifconfig
3、Get IP address
sudo dhclient -v usb0
Note: If you need to switch to the windows system to use, or restore to the default settings of the module, you can send the following command:
AT+CUSBPIDSWITCH=9001,1,1