Difference between revisions of "Raspberry Pi networked via RNDIS"

From Waveshare Wiki
Jump to: navigation, search
Line 13: Line 13:
  
 
[[File:SIM7600-RNDIS-3.jpg|800px]]
 
[[File:SIM7600-RNDIS-3.jpg|800px]]
 +
 +
 +
Note: If you need to switch to the windows system to use, or restore to the default settings of the module, you can send the following command:
 +
AT+CUSBPIDSWITCH=9001,1,1

Revision as of 08:20, 29 July 2020

1、Send the following commands through minicom and wait for the module to restart

AT+CUSBPIDSWITCH=9011,1,1

SIm7600-RNDIS-1.jpg

2、Run the ifconfig command to see if a USB0 card is identified

ifconfig

SIM7600-RNDIS-2.jpg

3、Get IP address

sudo dhclient -v usb0

SIM7600-RNDIS-3.jpg


Note: If you need to switch to the windows system to use, or restore to the default settings of the module, you can send the following command:

AT+CUSBPIDSWITCH=9001,1,1