Raspberry Pi Documentation
From Waveshare Wiki
Overview
Introduction
- Raspberry Pi, abbreviated as RPi, is a computer only the size of a credit card.
- Developed by the Raspberry Pi Foundation in the United Kingdom, it was originally intended to promote computer programming education for young students.
- Since its release in 2012, it has been sought after by many students, amateur intelligent hardware enthusiasts, computer enthusiasts, and other groups.
- The official recommended system for Raspberry Pi is Raspberry Pi OS, which is a free operating system based on Debian GNU/Linux.
- In addition to this, the Raspberry Pi supports many operating systems: Ubuntu, RetroPie, LibreELEC, and Manjaro, among others.
Preparation
- TF card reader
- 5V 3A power adapter
- At least 8GB TF card
- micro HDMI to HDMI cable
- Computer monitor or TV with HDMI interface (other interface monitors can use interface converter.)
Install Operating System
Install the system using official tools
- Raspberry Pi has officially developed a graphics TF card writing tool Pi Imager, which is suitable for Windows, Mac OS, Ubuntu and other operating systems;
- It will automatically download the image and install it to the SD card, download the latest version of Raspberry Pi Imager and install it.
How to use:
- Connect the TF card to the computer.
- Open Raspberry Pi Imager and select the desired operating system.
- Select the TF card to write the image to (Note: it is better to remove other U flash drives to prevent them from being erased).
- To configure the system in advance, press and hold CTRL+SHIFT+X (or click the small gear in the lower right corner), and click Save after setting.
- Click the burn button to write the data to the TF card.
- 6. At this point, the image is successfully burned, unplug the card reader, and insert the TF card into the Raspberry Pi.
File:Raspberry Pi Documentation02.gif
- 7.Load the TF card, connect the peripherals, turn on the power, and the Raspberry Pi can be turned on.