RS485 TO WIFI/ETH

RS485 TO WIFI/ETH RS485 to WIFI/ETH module

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: [Website] Chinese: 官网

Onboard Interfaces RS485

Related Products

Documentation

• User Manual
• MQTT Communciation

Software

• SSCOM Serial Debug Assistant
• RS485 TO WIFI/ETH Configuration Tool

FAQ

Question: Why can't the configuration web page be opened in the computer's browser and cannot communicate with TCP?

 Answer:

Set the IP of RS485 TO WIFI/ETH and computer to the same network address and different node address IP:
For example, RS485 TO WIFI/ETH IP is 10.10.100.254; computer IP is 10.10.100.253

Question: I forgot my IP, what should I do?

 Answer:

• If you have not changed your IP, the shipping IP defaults to 10.10.100.254;
• If you forget, you can configure the host computer tool in windows to enter the corresponding parameters to search for the device IP, as shown in the figure below:

Question: How to restore factory settings?

 Answer:

After power on, press and hold the Reload button for more than 5 seconds to restore the factory settings: