Difference between revisions of "RS485 TO ETH (B)"

From Waveshare Wiki
Jump to: navigation, search
Line 22: Line 22:
 
*[[:File:RS485-to-eth-b-user-manual-EN-v1.33.pdf|User Manual]]
 
*[[:File:RS485-to-eth-b-user-manual-EN-v1.33.pdf|User Manual]]
 
*[[:File:EN-RS485-TO-ETH-B-MQTT-and-json-user-manual2.pdf|MQTT and JSON Manual]]
 
*[[:File:EN-RS485-TO-ETH-B-MQTT-and-json-user-manual2.pdf|MQTT and JSON Manual]]
 +
*[https://www.waveshare.com/wiki/RS485_TO_ETH_(B)_Connect_Alibaba_Cloud_And_EMQX RS485_TO_ETH_(B)_Connect_Alibaba_Cloud_And_EMQX ]
 
<!--   
 
<!--   
 
*[https://www.waveshare.com/w/upload/6/66/RS485-to-eth-b-user-manual-EN-v1.3.pdf User Manual]
 
*[https://www.waveshare.com/w/upload/6/66/RS485-to-eth-b-user-manual-EN-v1.3.pdf User Manual]

Revision as of 03:19, 22 September 2022

RS485 TO ETH (B)
RS485-TO-ETH-B

RS485 TO ETH (B)ernet Converter
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Industrial Serial Server, RS485 To RJ45 Ethernet, TCP/IP To Serial, Rail-Mount Support

More

Documentation

Software

Certificate

CE EMC

FAQ

 Answer:
  • Set static IP, for example:

RS485 TO ETH (B) set to 192.168.1.200 port number 1111;
The computer is set to 192.168.1.199 port number 1111;

  • Tested with the TCP server shared by the Internet community: 120.79.100.197 port number 10002
  • If it still doesn't work, please reset to factory settings


 Answer:

1) Short the NC pin for 5 seconds:
RS485 B NC.png
2) Get the default parameters and modify the settings:
600px-RS485 B modify setting.png


 Answer:

The detailed data is as follows:
RS485-TO-ETH-B-POWER-EN.png


 Answer:

Configuration and download other firmware such as MQTT and Jetson Modbus cover the configuration interface web page file, you need to re-download configuration interface web file to RS485 TO ETH (B):
Web-config-tool.png


 Answer:

It is generally a server problem. If you fail to connect to the server, you can try the following server IP and port numbers:

120.76.100.197  10002 

485(B) IP Port.png



Support

If you require technical support, please go to the Support page and open a ticket.