RPi B+ (CN) Package D
From Waveshare Wiki
Revision as of 06:02, 13 November 2015 by Wiki Editorial Team (talk | contribs)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Related Kits
Jetson Nano
Jetson nano provides some demos for use, and others are not currently supported.
Install Library Function
- Open the terminal interface and enter the following command to install the corresponding library function:
sudo apt-get update sudo apt-get install python3-pip sudo pip3 install Jetson.GPIO sudo groupadd -f -r gpio sudo usermod -a -G gpio your_user_name sudo cp /opt/nvidia/jetson-gpio/etc/99-gpio.rules /etc/udev/rules.d/ sudo udevadm control --reload-rules && sudo udevadm trigger
[Note] your_user_name is the username you use, such as waveshare.
- Install I2C
sudo apt-get install python-smbu
- Install Image Processing Libraries
sudo apt-get install python3-pil sudo apt-get install python3-numpy
Download Demo
sudo apt-get install p7zip wget http://www.waveshare.net/w/upload/3/37/ARPI600.7z 7zr x ARPI600.7z -r -o./ARPI600 sudo chmod 777 -R ARPI600 cd ARPI600/JetsonNano/ARPI600_Code
Demo
PCF8563
cd PCF8563
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
TLC1543
cd TLC1543
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
UART
cd UART
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
Resources
Document
Application Notes
Datasheets
Software
FAQ
Support
Support
If you require technical support, please go to the Support page and open a ticket.