Difference between revisions of "RPi3 B Package D"

From Waveshare Wiki
Jump to: navigation, search
Line 1: Line 1:
[[File:RPi2-B-Package-D_l.jpg|thumb|right|400px |alt=RPi2-B-Package-D|link=http://www.waveshare.com/rpi3-b-package-d.htm | RPi3 B Package D]]
+
[[File:rpi3-b-package-d.jpg|thumb|right|400px |alt=RPi2-B-Package-D|link=http://www.waveshare.com/rpi3-b-package-d.htm | RPi3 B Package D]]
 
== Introduction ==
 
== Introduction ==
 
Raspberry Pi 3 Model B Development Kits, Expansion Board ARPI600, Various Sensors, Supports Arduino
 
Raspberry Pi 3 Model B Development Kits, Expansion Board ARPI600, Various Sensors, Supports Arduino

Revision as of 10:07, 18 April 2016

RPi2-B-Package-D
RPi3 B Package D

Introduction

Raspberry Pi 3 Model B Development Kits, Expansion Board ARPI600, Various Sensors, Supports Arduino

More

Related Kits

Jetson Nano

Jetson nano provides some demos for use, and others are not currently supported.

Install Library Function

  • Open the terminal interface and enter the following command to install the corresponding library function:
sudo apt-get update
sudo apt-get install python3-pip
sudo pip3 install Jetson.GPIO
sudo groupadd -f -r gpio
sudo usermod -a -G gpio your_user_name
sudo cp /opt/nvidia/jetson-gpio/etc/99-gpio.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules && sudo udevadm trigger

[Note] your_user_name is the username you use, such as waveshare.

  • Install I2C
sudo apt-get install python-smbu
  • Install Image Processing Libraries
sudo apt-get install python3-pil
sudo apt-get install python3-numpy

Download Demo

sudo apt-get install p7zip
wget http://www.waveshare.net/w/upload/3/37/ARPI600.7z
7zr x ARPI600.7z -r -o./ARPI600
sudo chmod 777 -R ARPI600
cd ARPI600/JetsonNano/ARPI600_Code

Demo

PCF8563

cd PCF8563
  • C
cd C
make clear
make
sudo ./main
  • python2
cd python2
sudo python main.py
  • python3
cd python3
sudo python3 main.py

TLC1543

cd TLC1543
  • C
cd C
make clear
make
sudo ./main
  • python2
cd python2
sudo python main.py
  • python3
cd python3
sudo python3 main.py

UART

cd UART
  • C
cd C
make clear
make
sudo ./main
  • python2
cd python2
sudo python main.py
  • python3
cd python3
sudo python3 main.py

Resources

Document

Application Notes

Datasheets

Software

FAQ

Support

Support

If you require technical support, please go to the Support page and open a ticket.