Difference between revisions of "RPi3 B Package D"
From Waveshare Wiki
m (Text replace - " [http://www.waveshare.com/" to " {{Amazon|default=display |More = [http://www.waveshare.com/") |
m (Text replace - ".htm More]" to ".htm More]}}") |
||
Line 21: | Line 21: | ||
{{Amazon|{{#urlget:amazon|default}}=display | {{Amazon|{{#urlget:amazon|default}}=display | ||
− | |More = [http://www.waveshare.com/rpi3-b-package-d.htm More] | + | |More = [http://www.waveshare.com/rpi3-b-package-d.htm More]}} |
== Related Kits == | == Related Kits == | ||
*[[RPi3 B | Raspberry Pi 3 Model B]] | *[[RPi3 B | Raspberry Pi 3 Model B]] |
Revision as of 06:21, 3 November 2016
| ||
Introduction
Raspberry Pi 3 Model B Development Kits, Expansion Board ARPI600, Various Sensors, Supports Arduino
More |
Related Kits
Jetson Nano
Jetson nano provides some demos for use, and others are not currently supported.
Install Library Function
- Open the terminal interface and enter the following command to install the corresponding library function:
sudo apt-get update sudo apt-get install python3-pip sudo pip3 install Jetson.GPIO sudo groupadd -f -r gpio sudo usermod -a -G gpio your_user_name sudo cp /opt/nvidia/jetson-gpio/etc/99-gpio.rules /etc/udev/rules.d/ sudo udevadm control --reload-rules && sudo udevadm trigger
[Note] your_user_name is the username you use, such as waveshare.
- Install I2C
sudo apt-get install python-smbu
- Install Image Processing Libraries
sudo apt-get install python3-pil sudo apt-get install python3-numpy
Download Demo
sudo apt-get install p7zip wget http://www.waveshare.net/w/upload/3/37/ARPI600.7z 7zr x ARPI600.7z -r -o./ARPI600 sudo chmod 777 -R ARPI600 cd ARPI600/JetsonNano/ARPI600_Code
Demo
PCF8563
cd PCF8563
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
TLC1543
cd TLC1543
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
UART
cd UART
- C
cd C make clear make sudo ./main
- python2
cd python2 sudo python main.py
- python3
cd python3 sudo python3 main.py
Resources
Document
Application Notes
Datasheets
Software
FAQ
Support
Support
If you require technical support, please go to the Support page and open a ticket.