RP2040-LCD-1.28

From Waveshare Wiki
Revision as of 06:55, 21 October 2022 by Eng52 (talk | contribs) (→‎Demo)
Jump to: navigation, search
RP2040-LCD-1.28
RP2040-LCD-1.28.jpg

RP2040
USB Type-C
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Although it is tiny, it incorporates a 1.28inch LCD round display, Li-ion battery charger, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting all GPIO and Debug headers, which makes it easy for you to develop and integrate it into products quickly.

Feature

  • RP2040 MCU chip designed by Raspberry Pi in the United Kingdom
  • Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 2MB of onboard Flash memory
  • Type-C connector, keeps it up to date, easier to use
  • Onboard 1.28-inch 240 x 240 resolution, 65K RGB IPS LCD display for clear color pictures
  • Lithium battery recharge/discharge header, suitable for mobile devices
  • All GPIOs are adapted through 1.27 pitch female headers (There are 30 pins in total, but some pins have been connected to the internal circuit, you need to pay attention when multiplexing, please refer to the wiki for details)
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 2 x SPI, 2 x I2C, 2 x UART, 2 x UART, 4 x 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 x Programmable I/O (PIO) state machines for custom peripheral support

Specification

LCD Parameter
Controller GC9A01A Resolution 240 (H) RGB x 240(V)
Communication interface SPI Display Size Φ32.4mm
Display Panel IPS Pixel Size 0.135 (H) x 0.135 (V) mm


IMU Parameter
Sensor QMI8658C
Accelerometer Resolution: 16 bits
Measurement Range (optional): ±2, ±4, ±8, ±16g
Gyroscope Resolution: 16 bits
Measurement Range (optional): ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec

Pinout

RP2040-LCD-1.28 Spec01.jpg

Dimensions

RP2040-LCD-1.28 Spec02.jpg

Resource

Demo

Drawing

Datasheet

Official Raspberry Pi Documents

Raspberry Pi Demo

Developing Software

Download Firmware

  • MicroPython Firmware Download

MicroPython Firmware Download.gif

  • C_Blink Firmware Download

C Blink Download.gif

Support

If you require technical support, please go to the Support page and open a ticket.