RGB-Matrix-P3-64x64
| ||
This product is a bare screen and needs to be displayed with the main control board such as Raspberry Pi, ESP32 and Arduino. For details, please refer to the list.
Overview
Introduction
This product is a 64×64 full-color LED matrix panel, with 4096 RGB LEDs onboard, 3mm pitch, supports Raspberry Pi and Arduino, etc. It provides supporting open source demos and tutorials, suitable for makers or electronics Enthusiasts start learning, or DIY secondary development into other desktop or wall-mounted display applications.
More |
Features
- 4096 individual RGB LEDs, full-color display, adjustable brightness.
- 64 × 64 pixels, 3mm pitch, allows displaying text, colorful images, or animation.
- 192 × 192mm dimensions, moderate size, suitable for DIY desktop display or wall mount display.
- Onboard two HUB75 headers, one for controller data input, one for output, and chain support.
- Comes with online open-source development resources and tutorials, for use with Raspberry Pi, Arduino, and so on.
Specifications
DIMENSIONS | 192mm × 192mm |
---|---|
PIXELS | 64 × 64=4096 DOTS |
PITCH | 3mm |
PIXEL FORM | 1R1G1B |
VIEWING ANGLE | ≥160° |
CONTROL TYPE | synchronization |
DRIVING | 1/32 scan |
HEADER | HUB75E |
POWER SUPPLY | 5V / 4A(VH4 header input) |
POWER | ≤20W |
Header Definition
PIN | DESCRIPTION | PIN | DESCRIPTION | |
---|---|---|---|---|
VCC | 5V power input | GND | Ground | |
R1 | R higher bit data | R2 | R lower bit data | |
G1 | G higher bit data | G2 | G lower bit data | |
B1 | B higher bit data | B2 | B lower bit data | |
A | A line selection | B | B line selection | |
C | C line selection | D | D line selection | |
E | E line selection | CLK | clock input | |
LAT/STB | latch pin | OE | output enable |
Note: The power supply ports (VCC and GND) of the display screen are 5V power supply, do not connect to other power supply voltages, so as not to burn the display screen.
Usage Scenarios
DIY Maker Desktop Or Wall Mount Display, Signboard, Environment Monitor...
Raspberry Pi Instructions
Please refer to the github information: Demo, wiring reference.
User Guides for Arduino Mega
Hardware Connection
Preparation
- RGB-Matrix-P3-64x64
- Arduino Mega (please purchase it separately)
Hardware Connection Diagram
Software Settings
- Download example
- Copy the folder under libraries in AuroraDemo to the libraries in the installation directory of the Arduino IDE
- After connecting the wires according to the hardware connection diagram, the software settings are as follows:
RGB text display
The effect of running the instance is shown in the following figure:
【Function Description】
- UI:
- Can display icons
- Can display text content such as text and numbers