Difference between revisions of "RGB-Matrix-P3-64x32"

From Waveshare Wiki
Jump to: navigation, search
m (Text replacement - "default={{#urlget:amazon|default}}" to "default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}")
 
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
<div class="wiki-pages jet-green-color">
 
<div class="tabber">
 
<div class="tabber">
 
{{Infobox item
 
{{Infobox item
|img=[[File:rgb-matrix-p3-64x32-1.jpg|300px|alt=rgb-matrix-p3-64x32|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/rgb-matrix-p3-64x32.htm}} | RGB-Matrix-P3-64x32]]
+
|img=[[File:rgb-matrix-p3-64x32-1.jpg|300px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}|url=link=http://www.waveshare.com/rgb-matrix-p3-64x32.htm}} | RGB-Matrix-P3-64x32]]
|caption=RGB LED Matrix Panel 64×32 Pixels 3.0mm Pitchs
+
|caption=RGB LED Matrix Panel 64 × 32 Pixels 3.0mm Pitchs
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]]
 
|category=[[:Category:OLEDs / LCDs|OLEDs / LCDs]]
 
|brand=Waveshare
 
|brand=Waveshare
|{{#urlget:amazon|default}}=display
+
|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
 
|website_cn=[http://www.waveshare.net/shop/rgb-matrix-p3-64x32.htm 官网]
 
|website_cn=[http://www.waveshare.net/shop/rgb-matrix-p3-64x32.htm 官网]
 
|website_en=[http://www.waveshare.com/product/rgb-matrix-p3-64x32.htm Website]
 
|website_en=[http://www.waveshare.com/product/rgb-matrix-p3-64x32.htm Website]
Line 16: Line 17:
 
<div class="tabbertab" title="Introduction">
 
<div class="tabbertab" title="Introduction">
 
<font color=red>This product is a bare screen and needs to be displayed with main control boards such as Raspberry Pi Pico, ESP32 and Arduino. For details, please refer to the product configuration list.</font>
 
<font color=red>This product is a bare screen and needs to be displayed with main control boards such as Raspberry Pi Pico, ESP32 and Arduino. For details, please refer to the product configuration list.</font>
 +
=Overview=
 
== Introduction ==
 
== Introduction ==
RGB Full-Color LED Matrix Panel, 64×32 Pixels, Adjustable Brightness
+
RGB Full-Color LED Matrix Panel, 64 × 32 Pixels, Adjustable Brightness
  
{{Amazon|{{#urlget:amazon|default}}=display
+
{{Amazon|{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display
|More = [http://www.waveshare.com/rgb-matrix-p3-64x32.htm More]}}
+
|More = [http://www.waveshare.com/rgb-matrix-p3-64x32.htm?amazon More]}}
 
{{RGB-Matrix-P3-64x32 Spec}}
 
{{RGB-Matrix-P3-64x32 Spec}}
</div>
 
<div class="tabbertab" title="Pico Guide">
 
 
{{Pico-Pico-RGB-Matrix-P3-64x32 Manual}}
 
{{Pico-Pico-RGB-Matrix-P3-64x32 Manual}}
</div>
 
<div class="tabbertab" title="ESP32 Guide">
 
 
{{ESP32-RGB-Matrix-P3-64x32 Manual}}
 
{{ESP32-RGB-Matrix-P3-64x32 Manual}}
</div>
 
<div class="tabbertab" title="Arduino Guide">
 
 
{{Arduino-RGB-Matrix-P3-64x32 Manual}}
 
{{Arduino-RGB-Matrix-P3-64x32 Manual}}
</div>
 
<!--<div class="tabbertab" title="STM32 Guide">
 
 
{{UART TO ETH for STM32 use}}
 
{{UART TO ETH for STM32 use}}
</div>-->
+
=Resources=
<div class="tabbertab" title="FAQ">
+
*[https://www.waveshare.net/w/upload/b/bf/RGB-Matrix-P3-64x32-Demo.zip Demo Sample]
 
 
</div>
 
 
 
<div class="tabbertab" title="Resources">
 
 
 
==Resources==
 
*[[:File:RGB-Matrix-P3-64x32-Demo.zip|Demo]]
 
 
*[https://www.waveshare.com/w/upload/0/00/arduino-1.8.15.zip windows-arduino-1.8.15]
 
*[https://www.waveshare.com/w/upload/0/00/arduino-1.8.15.zip windows-arduino-1.8.15]
 
<div class="tabbertab" title="Support">
 
 
==Support==
 
 
{{Service00}}
 
{{Service00}}
 +
</div>
 
</div>
 
</div>
 
</div>
 
</div>

Latest revision as of 06:14, 11 August 2022

RGB-Matrix-P3-64x32
RGB-Matrix-P3-64x32

RGB LED Matrix Panel 64 × 32 Pixels 3.0mm Pitchs
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

This product is a bare screen and needs to be displayed with main control boards such as Raspberry Pi Pico, ESP32 and Arduino. For details, please refer to the product configuration list.

Overview

Introduction

RGB Full-Color LED Matrix Panel, 64 × 32 Pixels, Adjustable Brightness

More

Features

  • 2048 individual RGB LEDs, full-color display, adjustable brightness.
  • 64 x 32 pixels, 3mm pitch, allows displaying text, colorful images, or animation.
  • 192 x 96mm dimensions, moderate size, suitable for DIY desktop display or wall mount display.
  • Onboard two HUB75 headers, one for controller data input, one for output, and chain support.
  • Provides open-source development resources and tutorials, for use with Raspberry Pi, Pico, ESP32, Arduino, and so on.

Specifications

DIMENSIONS 192mm × 96mm
PIXELS 64 × 32=2048 DOTS
PITCH 3mm
PIXEL FORM 1R1G1B
VIEWING ANGLE ≥160°
CONTROL TYPE synchronization
DRIVING 1/16 scan
HEADER HUB75
POWER SUPPLY 5V / 2.5A(VH4 header input)
POWER ≤12W

Header Definition

RGB-Matrix-P3-64x32-details-3.jpg

PIN DESCRIPTION PIN DESCRIPTION
VCC 5V power input GND Ground
R1 R higher bit data R2 R lower bit data
G1 G higher bit data G2 G lower bit data
B1 B higher bit data B2 B lower bit data
A A line selection B B line selection
C C line selection D D line selection
E E line selection CLK clock input
LAT/STB latch pin OE output enable

Note: The power supply port (VCC and GND) of the display is 5V, do not connect to other power supply voltages, or you will burn the display.

Usage Scenarios

DIY Maker Desktop Or Wall Mount Display, Signboard, Environment Monitor...

RGB-Matrix-P3-64x32-details-7.jpg

Hardware Introduction

Introduction to Floor Resources

Pico-RGB-Matrix-P3-64x32-details-25.jpg

Directions for Raspberry Pi

This product is mainly used with Raspberry PI Pico, not recommended with Raspberry PI motherboard because the new version of Raspberry PI is not supported in wiring PI. If you must use a Raspberry PI motherboard, please refer to github information: Demo, wiring reference
If the overall brightness of the indicator is dim, click setting to set the brightness.

User Guides for Pico

Pico connection pins

Board Pico Pin description
Pins used by RGB LED Matrix (HUB75 interface)
R1 GP02 R higher bit data
G1 GP03 G higher bit data
B1 GP04 B higher bit data
R2 GP05 R lower bit data
G2 GP08 G lower bit data
B2 GP09 B lower bit data
A GP10 A line selection
B GP16 B line selection
C GP18 C line selection
D GP20 D line selection
E GP22 E line selection
CLK GP11 clock input
STB/LAT GP12 latch pin
OE GP13 output enable

RGB-Matrix-P3-64x32-details-3.jpg

Board Pico Pin description
Pins used by other resources of the board
K0 GP15 KEY0 button, the MENU menu of the digital clock, can also be customized
K1 GP19 KEY1 button, + / Down button of digital clock, can also be customized
K2 GP21 KEY2 button,-/ UP button of digital clock, can also be customized
RUN RUN RESET button, can be used for Pico reset
BOOTSET BOOTSET BOOT button, can be used for Pico burning program (long press BOOT, then press RESET to enter the firmware download mode)
SDA GP06 I2C data pin, used to control DS3231 RTC clock chip
SCL GP07 I2C clock pin, used to control DS3231 RTC clock chip
BUZZ GP27 Buzzer control pin
AIN GP26 Photoresistor control pin
IRM GP28 Infrared receiving control pin

See detailed hardware design of the circuit diagram.

Hardware Connection

Materials needed
  • Pico-RGB-Matrix-P3-64 x 32 (this product).
  • Raspberry Pi Pico (must be purchased separately, if not, it is recommended to buy a version with soldered headers, which is convenient for direct insertion and use).
  • Micro USB cable (must be purchased separately).
Hardware connection steps
  1. Align the pin header which is marked in red and then connect the RGB LED Matrix panel to the driver board.
  2. Cut the adapter cable (about 10cm) by plier
  3. Connect the cable which is cut in the last step to the RGB LED Matrix and the driver board
  4. Assemble the Acrylic backplane and fix it with magnetic screws
  5. Optional: If you feel that the RGB LED Matrix is too bright, you can stick the black Acrylic font panel on the Matrix.

Example display

Multi-Features Digital Clock

This example is developed based on the C++ SDK. In order to quickly demonstrate the effects and functions of the example, you can skip the steps of "Building a C++ SDK Development Environment" and "Program Debugging and Development" and directly "Download and Burn the Program". After the burning is completed, the effect of the instance running is shown in the following figure:

Pico-rgb-matrix-p3-clock-cpp-sdk-1.jpg

【Function Description】

  • Time display screen:
    • Display date, day of the week, hour, minute, lunar calendar and temperature
  • Function setting menu
    • Date setting
    • time setting
    • BEEP setting (buzzer setting)
    • Auto brightness
    • Language setting (under development)
Fruit machine

This example is developed based on CircuitPython[1] , and the program is downloaded[2] . The effects and functions of the example are as follows:

Pico-RGB-Matrix-P3-64x32-details-17.png

【Function Description】

  • The display can display a variety of fruits or other small BMP icons
  • Automatically scroll icons at regular intervals, and randomly display the results of the scrolling
  1. CircuitPython is a fork of MicroPython, For specific usage, please refer to the RGB-Matrix related CircuitPython tutorial
  2. Pico must first install CircuitPython,and then copy the corresponding CircuitPythond code to the recognized U disk to complete the download.
Infrared transceiver test

This example is developed based on CircuitPython,and the example effects and functions are as follows:

RGB-Matrix-IR-Test.jpg

【Function Description】

  • The infrared serial code generated by the corresponding button of the infrared remote control can be recognized

C++ SDK Development Tutorial

Development environment setup

For a complete tutorial on how to get started with the C/C++ SDK, You can directly refer to the Offical manual of Raspberry Pi.

Raspberry Pi development environment setup

If you plan to develop for Pico on the Raspberry Pi, you can quickly set up the C/C++ toolchain by running our "setup script" from the command line.
Instructions: Before running the installation script, you should make sure that the operating system on your Raspberry Pi is up to date.

Windows development environment setup

For Windows development environment construction, please refer to:

Download and burn programs

C++ SDK program programming

The following is an example of programming a simple "blinking LED" program:

  1. Download blink.uf2 ("Blink LED" flash file)
  2. Press and hold the BOOTSEL button, then plug the Pico into the USB port of your Raspberry Pi or other computer.
  3. It will be mounted as a mass storage device named "RPI-RP2". Drag and drop the blink.uf2 binary onto the "RPI-RP2" drive letter. The Pico will restart and the onboard LEDs should start blinking.

Blink-an-LED-640x360.gif

CircuitPython Development Tutorial

If you are not familiar with CircuitPython, you can first study the official recommended guide "Introduction to CircuitPython for Raspberry Pi Pico".
This guide covers the basics of getting started with CircuitPython and using the editor.

Development environment setup

In order to facilitate the programming, development and debugging of CircuitPython, it is recommended to use the "Mu Editor" development software. You can use Mu Editor for Pico's CircuitPython development on Windows.
The following describes the development and use of Mu Editor under Windows.

Windows development environment (Mu Editor) build and use

  • Download Mu Editor and follow the steps to install
  • After the installation is complete, it is the first time to configure the language and select the mode. Since we are using CircuitPython, pay attention to the mode selection CircuitPython option.
  • After the configuration is complete, it will show that the device cannot be found, that is because Pico has not downloaded the CircuitPython firmware library.
  • Download the CircuitPython firmware library and burn it into Pico
  1. Download the CircuitPython UF2 file.
  2. Press and hold the BOOTSEL button, then plug the Pico into the USB port of your Raspberry Pi or other computer. Release the BOOTSEL button after connecting the Pico.
  3. It will be mounted as a mass storage device named "RPI-RP2".
  4. Drag and drop the CircuitPython UF2 file onto the "RPI-RP2" volume. Your Pico will reboot, a new disk drive named CIRCUITPY will appear, and you're done.
  5. The new disk drive will have a default code.py file, you open it with Mu Editor, the content is: "print("Hello World!")", the specific opening steps are shown in the last figure.
  • Open the serial port, click the blank area and press Ctrl+C, then press Ctrl+D or click the blank area of ​​the code interface and press Ctrl+S to run the program. You can observe the running effect in the CircuitPython REPL window.

User Guides of ESP32-S2-Pico

Environment Setting

Our demo is based on Arduino, please refer to Arduino Environment Setting

Example

Note: A Pico baseboard is required for use here.
Click to download the programFile:Pico-RGB-Matrix-P3-64x32-Demo (5).zip, after the download is complete, go to Pico-RGB-Matrix-P3-64x32-Demo\ESP32-S2-Pico\Arduino,
1. Copy RGBMatrix-master to the libraries in the Arduino installation directory;
2. Go back to RGB-Matrix-P3-64x32-Demo\\ESP32-S2-Pico\Arduino, open the .ino file in EzTimeTetrisClockESP32S2 and follow the steps below to download
Rgb-matrix.png
Rgb-matrix2.png

Example display

DSC.png

【Function Description】

  • Time display screen:
    • Display date, week, hour, minute, lunar calendar and temperature
  • Function setting menu
    • date setting
    • time setting
    • BEEP setting (beep setting)
    • Auto Brightness
    • language settings

User Guides of Arduino Mega

Hardware Connection

Material Needed

  • RGB-Matrix-P3-64 x 32 (this product)
  • Arduino Mega (sold separately)

Hardware Connection Picture

P3-64x32.png

Software Setting

  • Download arduino-1.8.15 (the corresponding library files have been installed)
  • After connecting the wires according to the hardware connection diagram, the software settings are as follows:
Arduino-1.8.15.png

Example display

RGB text display

The effect of running the example is shown in the figure below:

DSC 0003.jpg

【Function Description】

  • Display screen:
    • Displayable icon
    • Can display text and numbers and other text content

User Guides of ESP32

Hardware connection

Materials needed

  • RGB-Matrix-P3-64x32(This product)
  • NodeMCU-32S(To be purchased separately, if not, it is recommended to buy a version with a soldered pin header, which is convenient for direct insertion)

ESP32 connection pin correspondence

RGB LED Matrix Pins used (HUB75 interface)
bottom plate ESP32 Pin description
R1 GP13 High-order R data
A GP19 A row selection
B GP23 B line selection
C GP18 C row selection
D GP5 D line selection
E GP15 E row selection
CLK GP14 Clock Input
STB/LAT GP22 Latch Pin
OE GP0 Output Enable
Connect data input to data output
Data Input Data Output Pin Description
G1 R2 High G data
B1 G2 High-order B data
R2 R1 Lower R data
G2 G1 Low G data
B2 B1 Lower B data

RGB-Matrix-P3-64x32-details-3.jpg

Software settings

  • Download arduino-1.8.15 (corresponding library files have been installed)
  • After connecting the wires according to the hardware connection diagram, the software settings are as follows:
    ESP32-RGB-Matrix-EN.jpg
  • Notice:
    • You need to set up wifi, otherwise the program will not work properly

Example display

Tetris clock (with network calibration)

The running effect of the sample program is shown in the figure below:

DSC 0348.jpg

【Function Description】

  • Time display screen:
    • Time calibration via ESP32 network
    • display time
    • Block animation effect display

STM32

The sample program we provide is based on STM32F103RBT6, and the connection method provided is also the pin of the corresponding STM32F103RBT6. If there is a need to transplant the program, please connect according to the actual pin

Hardware Connection

STM32F103ZET connection pin correspondence
ETH STM32
5V 5V
GND GND
RXD1 PC10
TXD1 PC11
CFG0 PC12
RST1 PD2

Take our STM32F103RBT6 as an example, the connection is as follows:

2-CH UART TO ETH-STM32.png

Software Description

The routine is developed based on the HAL library. Please download the program in the data, find the STM32 program file directory, and open STM32\Serial_Port_Parameter_Configuration\MDK-ARM
CH9121.uvprojx under the directory, you can see the program.
CH9121 STM32 1.jpg

Open main.c, you can see the program that can be modified by the user, modify the corresponding parameters according to your own needs, and then recompile and download.
(This function is mainly used to configure the serial port parameters. If you use the upper computer configuration, you can directly run the program in the RX_TX file to test the data transmission and reception, whether it will lose packets, etc.)
CH9121 STM32 2.jpg
After the parameters are configured, download the program in the RX_TX folder to STM32.
After the download is successful, run SSCOM to connect to the ETH module, and you can send data to ETH, and ETH will return everything you sent to it.
CH9121-Arduino-3.jpg

Code Analysis

  • This program only has a simple configuration. If you need to configure other functions, you can refer to the serial port control command and configure it yourself:
uint8_t CH9121_Mode            //Mode selection
uint8_t CH9121_LOCAL_IP[4]     //Local IP
uint8_t CH9121_GATEWAY[4]      //Gateway
uint8_t CH9121_SUBNET_MASK[4]  //Subnet mask
uint8_t CH9121_TARGET_IP[4]    //Target IP
uint16_t CH9121_PORT1          //Local port
uint16_t CH9121_TARGET_PORT    //Target port
uint32_t CH9121_BAUD_RATE      //Serial port baud rate
  • According to the serial port control command, the following functions can be used to configure the parameters:
void CH9121_TX_4_bytes(UCHAR data, int command);  //Used for mode, whether the port is random, whether the port is disconnected from the network, whether to clear the serial port data, whether to open DHCP, //whether to open the serial port 2
void CH9121_TX_5_bytes(UWORD data, int command);  //Used to set the port number of the serial port
void CH9121_TX_7_bytes(UCHAR data[], int command);//Used to set IP, subnet mask, gateway
void CH9121_TX_BAUD(UDOUBLE data, int command);   //Used to set the baud rate of the serial port
void CH9121_Eed(); //Update configuration parameters to EEPROM, execute configuration, reset 9121, leave configuration mode

Resources

Support

If you require technical support, please go to the Support page and open a ticket.