PoE HAT (E)

From Waveshare Wiki
Revision as of 07:42, 25 October 2022 by Eng52 (talk | contribs)
Jump to: navigation, search
PoE HAT (E)
PoE HAT (E).jpg

POE, RPI
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Overview

This is a mini IEEE 802.3af-compliant PoE HAT for Raspberry Pi 3B+/4B. If you already have an IEEE 802.3af-compliant PoE router or switch, with this HAT you can provide both network connection and power supply for your Raspberry Pi in one cable.

Feature

  • Suitable for the Raspberry Pi 3B+/4B, it can be used with the official Raspberry Pi case without taking up more space
  • PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
  • Fully isolated switched-mode power supply (SMPS)
  • Smaller and more flexible with a more compact component layout

Parameters

  • POE Power Input: 37V~57V DC
  • POE Power Output: 5V/2.5A DC
  • Network Standard: 802.3af PoE-compliant
  • Dimensions: 65.00 × 32.00mm

Working With Raspberry Pi

Insert the PoE_HAT(E) into the Raspberry Pi, as shown below:
PoE HAT (E)06.jpg
Working with the official Raspberry Pi case, as shown below:
PoE HAT (E)07.jpg
Note: Because the case is relatively closed, the fan cannot play its full effect. Please do not work under high load for a long time when using this case.
Connect to the cooling fan, as shown in the picture below:
PoE HAT (E)08.jpg

Support

If you require technical support, please go to the Support page and open a ticket.