PoE HAT (D)
From Waveshare Wiki
Revision as of 06:33, 16 May 2022 by Waveshare-admin (talk | contribs)
| ||
Instroduction
This Power Over Ethernet HAT (Type B) is designed for Raspberry Pi 3B+/4B, it supports 802.3af Power-Sourcing equipment for PoE function.
Features
- Suitable for Raspberry Pi 3B+/4B, can be used together with the official Raspberry Pi shell, not taking up more space
- Support PoE Power over Ethernet, support 802.3af PoE network standard
- Fully isolated switch mode power supply (SMPS)
- Onboard high-speed active cooling fan to meet the corresponding cooling needs
Specifications
- POE input voltage: 37V ~ 57V DC
- POE output voltage: 5V 2.5A DC
- Network standard: 802.3af PoE
- Product size: 65.0×56.5mm
Examples
Hardware connection
You need to connect the PoE HAT D to Raspberry Pi as picture
Hardware connection
Use with the official Raspberry Pi shell, as shown in the figure below.
Note: Since the casing is relatively closed, the fan effect cannot be fully effective. Please do not work with high load for a long time when the casing is used
Resources
Documents
Support
Support
If you require technical support, please go to the Support page and open a ticket.