PoE HAT (D)

From Waveshare Wiki
Revision as of 02:12, 13 May 2022 by Waveshare-admin (talk | contribs) (Text replacement - "{{#urlget:amazon|default}}=display" to "{{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}=display")
Jump to: navigation, search
PoE HAT (D)
PoE HAT (D)

Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af Power-Sourcing Equipment Required
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Instroduction

This Power Over Ethernet HAT (Type B) is designed for Raspberry Pi 3B+/4B, it supports 802.3af Power-Sourcing equipment for PoE function.

Features

  • Suitable for Raspberry Pi 3B+/4B, can be used together with the official Raspberry Pi shell, not taking up more space
  • Support PoE Power over Ethernet, support 802.3af PoE network standard
  • Fully isolated switch mode power supply (SMPS)
  • Onboard high-speed active cooling fan to meet the corresponding cooling needs

Specifications

  • POE input voltage: 37V ~ 57V DC
  • POE output voltage: 5V 2.5A DC
  • Network standard: 802.3af PoE
  • Product size: 65.0×56.5mm

Examples

Hardware connection

You need to connect the PoE HAT D to Raspberry Pi as picture
PoE-HAT-D-details-5.jpg

Hardware connection

Use with the official Raspberry Pi shell, as shown in the figure below.
PoE-HAT-D-details-4.jpg
Note: Since the casing is relatively closed, the fan effect cannot be fully effective. Please do not work with high load for a long time when the casing is used

Resources

Documents

Support

Support

If you require technical support, please go to the Support page and open a ticket.